Clay, I havent had a chance to go back with my laptop to run Iperf from it yet. Yes, I run all AFs from the included POE using gigabit surge protectors. My initial tests at this tower upon installation a year ago were limited by my laptop only having a 100Mb port. Since then, I purchased a USB gigabit adapter for it which runs upstream http tests slightly over 100Mbps. Thought: Maybe the USB port cant handle it? Exactly how did you run your tests?
On Fri, Dec 5, 2014 at 3:20 PM, Clay Stewart < cstew...@stewartcomputerservices.com> wrote: > Rick, late on this issu, was it the switch, do not read where you said it > was.... I had an issue similar, turned out to be I had accidentally placed > a 100M surge protector instead of a gig. Also, I assume you are powering AF > with included POE, and not TSes (they do not have amps). We run with the > included POE, with LAN into unpowered TS 05/08 1Gb switch port and get > 777Mbps on test, TS to TS via AF to AF. > > On Thu, Dec 4, 2014 at 5:16 PM, Rory Conaway <r...@triadwireless.net> > wrote: > >> So basically you just had a bad switch. Stuff happens. I think the >> first batch had some problem but after that, they have been pretty good for >> us but they don't show up in AC2 yet. >> >> >> >> The best small/cheap outdoor switches I've seen are the Tycons. >> Unfortunately, 100Mbps is so yesterday so we replaced them all with >> TS-5/8's. >> >> >> >> Rory >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> *On Behalf Of *Josh Luthman >> *Sent:* Thursday, December 4, 2014 12:39 PM >> >> *To:* Ubiquiti Users Group >> *Subject:* Re: [Ubnt_users] Speed test no working >> >> >> >> I'm saying those ports won't work if the management interface doesn't >> work. In my case, my switches failed to respond to the management >> interface and the non-management ports stopped working as well (they did >> pass voltage, no eth link IIRC) >> >> >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Thu, Dec 4, 2014 at 2:37 PM, Rory Conaway <r...@triadwireless.net> >> wrote: >> >> Are you saying the TS-5/8 units can't handle 1Gbps on the ports? >> >> >> >> Rory >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> *On Behalf Of *Josh Luthman >> *Sent:* Thursday, December 4, 2014 11:22 AM >> >> >> *To:* Ubiquiti Users Group >> *Subject:* Re: [Ubnt_users] Speed test no working >> >> >> >> No it doesn't... That's the real problem. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Dec 4, 2014 12:52 PM, "RickG" <rgunder...@gmail.com> wrote: >> >> About ToughSwitches: Should I assume as long as you dont use the >> management interface the unit will function fine as a gigabit switch? >> >> >> >> On Mon, Dec 1, 2014 at 4:32 PM, Josh Reynolds <j...@spitwspots.com> >> wrote: >> >> Hardware, but management interface/cpu is only 100Mbps link internally. >> >> josh reynolds :: chief information officer >> >> spitwspots :: www.spitwspots.com >> >> On 12/01/2014 12:30 PM, Josh Luthman wrote: >> >> Are TS software or hardware switched? >> >> >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Mon, Dec 1, 2014 at 4:29 PM, RickG <rgunder...@gmail.com> wrote: >> >> I know but I actually get a touch above 100 - like 104-106... >> >> >> >> On Mon, Dec 1, 2014 at 4:14 PM, Josh Luthman <j...@imaginenetworksllc.com> >> wrote: >> >> A 100 meg limit sounds like a 100 BaseT problem to me, but who knows! >> >> >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Mon, Dec 1, 2014 at 4:11 PM, RickG <rgunder...@gmail.com> wrote: >> >> Agreed. Just wanted to confirm. Will have to chase the problem down! >> >> >> >> On Mon, Dec 1, 2014 at 4:07 PM, Josh Luthman <j...@imaginenetworksllc.com> >> wrote: >> >> You should be getting 770 megs on a test in either direction (even at the >> same time!) >> >> >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Mon, Dec 1, 2014 at 4:06 PM, RickG <rgunder...@gmail.com> wrote: >> >> ToughSwitches on both ends on gigabit ports. I thought maybe laptop was >> maxed out until I ran IPerf from TS8 to TS8. >> >> >> >> On Mon, Dec 1, 2014 at 4:02 PM, Josh Luthman <j...@imaginenetworksllc.com> >> wrote: >> >> 100 megabit switch between laptop and Airfiber? Is it linked at gig? Is >> your laptop's CPU maxed out? >> >> >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Mon, Dec 1, 2014 at 4:00 PM, RickG <rgunder...@gmail.com> wrote: >> >> It might be the capacity but when I test I only get around 100Mbps. >> >> >> >> On Mon, Dec 1, 2014 at 3:50 PM, Mike Hammett <wispaubntus...@ics-il.net> >> wrote: >> >> iPerf is not included with airFiber as it isn't needed. What it tells you >> the channel capacity is is what the channel capacity is. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> >> ------------------------------ >> >> *From: *"RickG" <rgunder...@gmail.com> >> *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org> >> *Sent: *Monday, December 1, 2014 2:48:52 PM >> >> >> *Subject: *Re: [Ubnt_users] Speed test no working >> >> Is there a trick to getting iperf to work on AirFiber? >> >> >> >> On Sun, Nov 16, 2014 at 4:01 PM, Adair Winter < >> ada...@amarillowireless.net> wrote: >> >> I usually just SSH to the client radio/far side, run iperf -s then go to >> one of my servers in the data center and run iperf -c (client IP) -P5 >> >> works better than the web interface anyway >> >> >> >> >> >> On Sun, Nov 16, 2014 at 2:33 PM, Daniel Peoples <dpe...@gmail.com> wrote: >> >> For speedtests I actually have a 5 year old bullet m5 in my NOC with the >> wlan disabled on the latest firmware, it has to be rebooted about once a >> month for it to work. >> >> Also, I don't know when they changed it, but for some reason the results >> of the speedtests(which I thought were UDP) are actually what I can real >> world get with TCP on that same circuit. Anyone know whats up with this? I >> have tested from several different points in our network with a variety of >> backhauls to that bulletm5 and get real world TCP speeds now a days. >> >> >> *Daniel Peoples* >> Resonance Broadband >> >> *Resonancebroadband.com* <http://Resonancebroadband.com> >> 918-429-3620 >> >> >> >> On Sun, Nov 16, 2014 at 2:25 PM, Tim Kerns <t...@cv-access.com> wrote: >> >> Not so easy to do....if you have, like me,some bullets or air grids.... >> then they can not have anything above 5.3 because you lose DFS. >> >> >> >> These were not re-certified by UBNT. >> >> >> >> :0 >> >> >> >> >> >> *From:* Rory Conaway <r...@triadwireless.net> >> >> *Sent:* Sunday, November 16, 2014 12:02 PM >> >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> >> *Subject:* Re: [Ubnt_users] Speed test no working >> >> >> >> Just get everything on 5.5.10. No reason not to. >> >> >> >> Rory >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> *On Behalf Of *Jerry Richardson (airCloud) >> *Sent:* Sunday, November 16, 2014 12:01 PM >> *To:* Ubiquiti Users Group >> *Subject:* Re: [Ubnt_users] Speed test no working >> >> >> >> We have noticed that if the SW versions don't match it will not work. >> >> >> >> On Sun, Nov 16, 2014 at 10:49 AM, Daniel Peoples <dpe...@gmail.com> >> wrote: >> >> This is something that has been an issue since 5.5 as far as I know. >> >> On Nov 16, 2014 11:18 AM, "Paul Conlin" <pcon...@blazebroadband.com> >> wrote: >> >> Is there a fix for this? A workaround besides rebooting? We are on >> 5.5.8. Should we move up to 5.5.10? >> >> >> >> PC >> >> Blaze Broadband >> >> >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> *On Behalf Of *Daniel and Regina Peoples >> *Sent:* Tuesday, March 4, 2014 8:57 PM >> *To:* Ubiquiti Users Group >> *Subject:* Re: [Ubnt_users] Speed test no working >> >> >> >> This is a "Feature" of 5.5+ IIRC 5.3.5 didn't have this issue. >> >> >> *Daniel Peoples* >> Resonance Broadband >> >> *Resonancebroadband.com* <http://Resonancebroadband.com> >> 918-429-3620 >> >> >> >> On Tue, Mar 4, 2014 at 7:53 PM, RickG <rgunder...@gmail.com> wrote: >> >> Well, 5.5.4 sucks... >> >> >> >> On Tue, Mar 4, 2014 at 4:59 PM, Eduardo <edua...@webjogger.net> wrote: >> >> Is this issue related to the firmware version? >> >> >> >> Eduardo >> >> >> >> ----- Original Message ----- >> >> *From:* Matt Hoppes <mhop...@indigowireless.com> >> >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> >> *Sent:* Tuesday, March 04, 2014 4:49 PM >> >> *Subject:* Re: [Ubnt_users] Speed test no working >> >> >> >> Reboot both radios -- there's some kind of a memory leak/issue. >> >> >> Matt Hoppes >> Director of Information Technology >> Indigo Wireless >> +1 (570) 723-7312 >> >> On 3/4/14, 4:48 PM, Eduardo wrote: >> > I'm trying to run a speed test from a station in a PtP link, and got >> > this message: >> > >> > Error: Specified device is not >> > compatible for speedtest. >> > >> > Both radios are BulletM5 with v5.5.4. I got the same error when tried in >> > a link with RocketM365 in both ends and v5.5.6. >> > >> > Also I've tried in a PtoP connection also with Bullets, but M2 and >> > v.5.5.6 with the same result. >> > >> > The issue is always running the speed test from the station to the AP. >> > >> > Have you guys seen this issue? >> > >> > Any suggestions on how I can fix it. >> > >> > Thanks, >> > Eduardo >> > >> > >> > >> > _______________________________________________ >> > Ubnt_users mailing list >> > Ubnt_users@wispa.org >> > http://lists.wispa.org/mailman/listinfo/ubnt_users >> > >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> -- >> -RickG KyWiFi >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ------------------------------ >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> -- >> >> Adair Winter >> VP, Network Operations / Owner >> Amarillo Wireless | 806.316.5071 >> C: 806.231.7180 >> http://www.amarillowireless.net >> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> -- >> >> -RickG KyWiFi >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> -- >> >> -RickG KyWiFi >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> -- >> >> -RickG KyWiFi >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> -- >> >> -RickG KyWiFi >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> -- >> >> -RickG KyWiFi >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> _______________________________________________ >> >> Ubnt_users mailing list >> >> Ubnt_users@wispa.org >> >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> >> -- >> >> -RickG KyWiFi >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > > > -- > > > -- > Clay Stewart, CEO > SCS Broadband > 434.263.6363 O > 434.942.6510 C > cstew...@scsbroadband.com > "We Keep You Up and Running" > > Please send sales inquiries to sa...@scsbroadband.com > Please send service/repair requests to supp...@scsbroadband.com > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- -RickG KyWiFi
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
