It has USB3.0. I bought the converter because the Ethernet port is only
100Mb. It's hard to find a good field laptop these days!
http://www.bestbuy.com/site/hp-15-6-laptop-amd-a6-series-4gb-memory-750gb-hard-drive-black/9925388.p?id=1219450405650&skuId=9925388

On Fri, Dec 5, 2014 at 10:15 PM, Mike Hammett <wispaubntus...@ics-il.net>
wrote:

> What kind of USB? USB, USB2 or USB3?
>
> Does the PC have the nuts to do that much data? I wonder if it only has
> 100 meg Ethernet.
>
>
>
> -----
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> ------------------------------
> *From: *"RickG" <rgunder...@gmail.com>
> *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org>
> *Sent: *Friday, December 5, 2014 9:11:18 PM
>
> *Subject: *Re: [Ubnt_users] Speed test no working
>
> Clay, I havent had a chance to go back with my laptop to run Iperf from it
> yet. Yes, I run all AFs from the included POE using gigabit surge
> protectors. My initial tests at this tower upon  installation a year ago
> were limited by my laptop only having a 100Mb port. Since then, I purchased
> a USB gigabit adapter for it which runs upstream http tests slightly over
> 100Mbps. Thought: Maybe the USB port cant handle it? Exactly how did you
> run your tests?
>
> On Fri, Dec 5, 2014 at 3:20 PM, Clay Stewart <
> cstew...@stewartcomputerservices.com> wrote:
>
>> Rick, late on this issu, was it the switch, do not read where you said it
>> was.... I had an issue similar, turned out to be I had accidentally placed
>> a 100M surge protector instead of a gig. Also, I assume you are powering AF
>> with included POE, and not TSes (they do not have amps). We run with the
>> included POE, with LAN into unpowered TS 05/08 1Gb switch port and get
>> 777Mbps on test, TS to TS via AF to AF.
>>
>> On Thu, Dec 4, 2014 at 5:16 PM, Rory Conaway <r...@triadwireless.net>
>> wrote:
>>
>>> So basically you just had a bad switch.  Stuff happens.  I think the
>>> first batch had some problem but after that, they have been pretty good for
>>> us but they don't show up in AC2 yet.
>>>
>>>
>>>
>>> The best small/cheap outdoor switches I've seen are the Tycons.
>>> Unfortunately, 100Mbps is so yesterday so we replaced them all with
>>> TS-5/8's.
>>>
>>>
>>>
>>> Rory
>>>
>>>
>>>
>>> *From:* ubnt_users-boun...@wispa.org [mailto:
>>> ubnt_users-boun...@wispa.org] *On Behalf Of *Josh Luthman
>>> *Sent:* Thursday, December 4, 2014 12:39 PM
>>>
>>> *To:* Ubiquiti Users Group
>>> *Subject:* Re: [Ubnt_users] Speed test no working
>>>
>>>
>>>
>>> I'm saying those ports won't work if the management interface doesn't
>>> work.  In my case, my switches failed to respond to the management
>>> interface and the non-management ports stopped working as well (they did
>>> pass voltage, no eth link IIRC)
>>>
>>>
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>>
>>>
>>> On Thu, Dec 4, 2014 at 2:37 PM, Rory Conaway <r...@triadwireless.net>
>>> wrote:
>>>
>>> Are you saying the TS-5/8 units can't handle 1Gbps on the ports?
>>>
>>>
>>>
>>> Rory
>>>
>>>
>>>
>>> *From:* ubnt_users-boun...@wispa.org [mailto:
>>> ubnt_users-boun...@wispa.org] *On Behalf Of *Josh Luthman
>>> *Sent:* Thursday, December 4, 2014 11:22 AM
>>>
>>>
>>> *To:* Ubiquiti Users Group
>>> *Subject:* Re: [Ubnt_users] Speed test no working
>>>
>>>
>>>
>>> No it doesn't... That's the real problem.
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>> On Dec 4, 2014 12:52 PM, "RickG" <rgunder...@gmail.com> wrote:
>>>
>>> About ToughSwitches: Should I assume as long as you dont use the
>>> management interface the unit will function fine as a gigabit switch?
>>>
>>>
>>>
>>> On Mon, Dec 1, 2014 at 4:32 PM, Josh Reynolds <j...@spitwspots.com>
>>> wrote:
>>>
>>> Hardware, but management interface/cpu is only 100Mbps link internally.
>>>
>>> josh reynolds :: chief information officer
>>>
>>> spitwspots :: www.spitwspots.com
>>>
>>> On 12/01/2014 12:30 PM, Josh Luthman wrote:
>>>
>>> Are TS software or hardware switched?
>>>
>>>
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>>
>>>
>>> On Mon, Dec 1, 2014 at 4:29 PM, RickG <rgunder...@gmail.com> wrote:
>>>
>>> I know but I actually get a touch above 100 - like 104-106...
>>>
>>>
>>>
>>> On Mon, Dec 1, 2014 at 4:14 PM, Josh Luthman <
>>> j...@imaginenetworksllc.com> wrote:
>>>
>>> A 100 meg limit sounds like a 100 BaseT problem to me, but who knows!
>>>
>>>
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>>
>>>
>>> On Mon, Dec 1, 2014 at 4:11 PM, RickG <rgunder...@gmail.com> wrote:
>>>
>>> Agreed. Just wanted to confirm. Will have to chase the problem down!
>>>
>>>
>>>
>>> On Mon, Dec 1, 2014 at 4:07 PM, Josh Luthman <
>>> j...@imaginenetworksllc.com> wrote:
>>>
>>> You should be getting 770 megs on a test in either direction (even at
>>> the same time!)
>>>
>>>
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>>
>>>
>>> On Mon, Dec 1, 2014 at 4:06 PM, RickG <rgunder...@gmail.com> wrote:
>>>
>>> ToughSwitches on both ends on gigabit ports. I thought maybe laptop was
>>> maxed out until I ran IPerf from TS8 to TS8.
>>>
>>>
>>>
>>> On Mon, Dec 1, 2014 at 4:02 PM, Josh Luthman <
>>> j...@imaginenetworksllc.com> wrote:
>>>
>>> 100 megabit switch between laptop and Airfiber?  Is it linked at gig?
>>> Is your laptop's CPU maxed out?
>>>
>>>
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>>
>>>
>>> On Mon, Dec 1, 2014 at 4:00 PM, RickG <rgunder...@gmail.com> wrote:
>>>
>>> It might be the capacity but when I test I only get around 100Mbps.
>>>
>>>
>>>
>>> On Mon, Dec 1, 2014 at 3:50 PM, Mike Hammett <wispaubntus...@ics-il.net>
>>> wrote:
>>>
>>> iPerf is not included with airFiber as it isn't needed. What it tells
>>> you the channel capacity is is what the channel capacity is.
>>>
>>>
>>>
>>> -----
>>> Mike Hammett
>>> Intelligent Computing Solutions
>>> http://www.ics-il.com
>>>
>>>
>>> ------------------------------
>>>
>>> *From: *"RickG" <rgunder...@gmail.com>
>>> *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org>
>>> *Sent: *Monday, December 1, 2014 2:48:52 PM
>>>
>>>
>>> *Subject: *Re: [Ubnt_users] Speed test no working
>>>
>>> Is there a trick to getting iperf to work on AirFiber?
>>>
>>>
>>>
>>> On Sun, Nov 16, 2014 at 4:01 PM, Adair Winter <
>>> ada...@amarillowireless.net> wrote:
>>>
>>> I usually just SSH to the client radio/far side, run iperf -s then go to
>>> one of my servers in the data center and run iperf -c (client IP) -P5
>>>
>>> works better than the web interface anyway
>>>
>>>
>>>
>>>
>>>
>>> On Sun, Nov 16, 2014 at 2:33 PM, Daniel Peoples <dpe...@gmail.com>
>>> wrote:
>>>
>>> For speedtests I actually have a 5 year old bullet m5 in my NOC with the
>>> wlan disabled on the latest firmware, it has to be rebooted about once a
>>> month for it to work.
>>>
>>> Also, I don't know when they changed it, but for some reason the results
>>> of the speedtests(which I thought were UDP) are actually what I can real
>>> world get with TCP on that same circuit. Anyone know whats up with this? I
>>> have tested from several different points in our network with a variety of
>>> backhauls to that bulletm5 and get real world TCP speeds now a days.
>>>
>>>
>>> *Daniel Peoples*
>>> Resonance Broadband
>>>
>>> *Resonancebroadband.com* <http://Resonancebroadband.com>
>>> 918-429-3620
>>>
>>>
>>>
>>> On Sun, Nov 16, 2014 at 2:25 PM, Tim Kerns <t...@cv-access.com> wrote:
>>>
>>> Not so easy to do....if you have, like me,some bullets or air grids....
>>> then they can not have anything  above 5.3 because you lose DFS.
>>>
>>>
>>>
>>> These were not re-certified by UBNT.
>>>
>>>
>>>
>>> :0
>>>
>>>
>>>
>>>
>>>
>>> *From:* Rory Conaway <r...@triadwireless.net>
>>>
>>> *Sent:* Sunday, November 16, 2014 12:02 PM
>>>
>>> *To:* Ubiquiti Users Group <ubnt_users@wispa.org>
>>>
>>> *Subject:* Re: [Ubnt_users] Speed test no working
>>>
>>>
>>>
>>> Just get everything on 5.5.10.  No reason not to.
>>>
>>>
>>>
>>> Rory
>>>
>>>
>>>
>>> *From:* ubnt_users-boun...@wispa.org [mailto:
>>> ubnt_users-boun...@wispa.org] *On Behalf Of *Jerry Richardson (airCloud)
>>> *Sent:* Sunday, November 16, 2014 12:01 PM
>>> *To:* Ubiquiti Users Group
>>> *Subject:* Re: [Ubnt_users] Speed test no working
>>>
>>>
>>>
>>> We have noticed that if the SW versions don't match it will not work.
>>>
>>>
>>>
>>> On Sun, Nov 16, 2014 at 10:49 AM, Daniel Peoples <dpe...@gmail.com>
>>> wrote:
>>>
>>> This is something that has been an issue since 5.5 as far as I know.
>>>
>>> On Nov 16, 2014 11:18 AM, "Paul Conlin" <pcon...@blazebroadband.com>
>>> wrote:
>>>
>>> Is there a fix for this?  A workaround besides rebooting?  We are on
>>> 5.5.8.  Should we move up to 5.5.10?
>>>
>>>
>>>
>>> PC
>>>
>>> Blaze Broadband
>>>
>>>
>>>
>>>
>>>
>>> *From:* ubnt_users-boun...@wispa.org [mailto:
>>> ubnt_users-boun...@wispa.org] *On Behalf Of *Daniel and Regina Peoples
>>> *Sent:* Tuesday, March 4, 2014 8:57 PM
>>> *To:* Ubiquiti Users Group
>>> *Subject:* Re: [Ubnt_users] Speed test no working
>>>
>>>
>>>
>>> This is a "Feature" of 5.5+ IIRC 5.3.5 didn't have this issue.
>>>
>>>
>>> *Daniel Peoples*
>>> Resonance Broadband
>>>
>>> *Resonancebroadband.com* <http://Resonancebroadband.com>
>>> 918-429-3620
>>>
>>>
>>>
>>> On Tue, Mar 4, 2014 at 7:53 PM, RickG <rgunder...@gmail.com> wrote:
>>>
>>> Well, 5.5.4 sucks...
>>>
>>>
>>>
>>> On Tue, Mar 4, 2014 at 4:59 PM, Eduardo <edua...@webjogger.net> wrote:
>>>
>>> Is this issue related to the firmware version?
>>>
>>>
>>>
>>> Eduardo
>>>
>>>
>>>
>>> ----- Original Message -----
>>>
>>> *From:* Matt Hoppes <mhop...@indigowireless.com>
>>>
>>> *To:* Ubiquiti Users Group <ubnt_users@wispa.org>
>>>
>>> *Sent:* Tuesday, March 04, 2014 4:49 PM
>>>
>>> *Subject:* Re: [Ubnt_users] Speed test no working
>>>
>>>
>>>
>>> Reboot both radios -- there's some kind of a memory leak/issue.
>>>
>>>
>>> Matt Hoppes
>>> Director of Information Technology
>>> Indigo Wireless
>>> +1 (570) 723-7312
>>>
>>> On 3/4/14, 4:48 PM, Eduardo wrote:
>>> > I'm trying to run a speed test from a station in a PtP link, and got
>>> > this message:
>>> >
>>> > Error: Specified device is not
>>> > compatible for speedtest.
>>> >
>>> > Both radios are BulletM5 with v5.5.4. I got the same error when tried
>>> in
>>> > a link with RocketM365 in both ends and v5.5.6.
>>> >
>>> > Also I've tried in a PtoP connection also with Bullets, but M2 and
>>> > v.5.5.6 with the same result.
>>> >
>>> > The issue is always running the speed test from the station to the AP.
>>> >
>>> > Have you guys seen this issue?
>>> >
>>> > Any suggestions on how I can fix it.
>>> >
>>> > Thanks,
>>> > Eduardo
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > Ubnt_users mailing list
>>> > Ubnt_users@wispa.org
>>> > http://lists.wispa.org/mailman/listinfo/ubnt_users
>>> >
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>>
>>> --
>>> -RickG KyWiFi
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>> ------------------------------
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> Adair Winter
>>> VP, Network Operations / Owner
>>> Amarillo Wireless | 806.316.5071
>>> C: 806.231.7180
>>> http://www.amarillowireless.net
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> -RickG KyWiFi
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> -RickG KyWiFi
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> -RickG KyWiFi
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> -RickG KyWiFi
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> -RickG KyWiFi
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> Ubnt_users mailing list
>>>
>>> Ubnt_users@wispa.org
>>>
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> -RickG KyWiFi
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
>>> _______________________________________________
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>
>>
>> --
>>
>>
>> --
>> Clay Stewart, CEO
>> SCS Broadband
>>   434.263.6363 O
>>   434.942.6510 C
>>   cstew...@scsbroadband.com
>> "We Keep You Up and Running"
>>
>> Please send sales inquiries to sa...@scsbroadband.com
>> Please send service/repair requests to supp...@scsbroadband.com
>>
>> _______________________________________________
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
>
> --
> -RickG KyWiFi
>
> _______________________________________________
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
> _______________________________________________
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


-- 
-RickG KyWiFi
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to