I’ve upgraded every Rocket and haven’t seen the problem. Might be an issue with the RF sections failing at the perimeter.
Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Sunday, December 7, 2014 11:48 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Old Rockets, weird problems Old rocket, plug in DFS credentials for your company, reboot BOTH SIDES. BOTH. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 7, 2014 1:45 PM, "Mike Hammett" <wispaubntus...@ics-il.net> wrote: I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them as needed throughout the years. The past day or two, performance in on part of the network has been erratic to say the best of it. I noticed that they were in Compliance Test mode, but didn't have the input boxes for the DFS stuff, so I must have entered it at one point, but never actually moved over. They were on 5.5.2. Don't fuck with what works. Well, now it's not working right. I upgrade to 5.5.4, then 5.5.10. I set the country code to US.... no DFS channels show up on the AP. Do I need to reboot it after setting it to US so that I can get the DFS channels? A reset to defaults and starting over is kinda out of the question at the moment. Any other ideas? If I have to climb to replace radios, ePMPs are going up instead. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users