All AC here. We are moving all AP's and CPE's from 2.4N to 5GHz AC. Also replacing 5GHz airMax N backbone with airFiber5X.
Phil On Sun, Jul 17, 2016 at 6:50 AM, Adair Winter <ada...@amarillowireless.net> wrote: > Peter and Phil, Are you running ac clients, mixed or more series only? > On Jul 16, 2016 11:30 PM, "Peter Kranz" <pkr...@unwiredltd.com> wrote: > >> I’ve had a couple instanced of AC Prism units rebooting, and one instance >> of a lockup that required a hard power cycle. You should use something like >> a tough switch to power them to allow remote power cycles if you run into >> the issue, and collect and submit the logs if they reboot unexpectedly. >> It’s definitely not something I am seeing daily or weekly, or even monthly.. >> >> >> >> -PK >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> *On Behalf Of *CBB - Jay Fuller >> *Sent:* Saturday, July 16, 2016 3:28 PM >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> *Subject:* Re: [Ubnt_users] 5 ghz airprism - reports >> >> >> >> >> >> have either of you seen any ethernet lockups like reported on ubnt forums? >> >> ----- Original Message ----- >> >> *From:* Phil Curnutt <pcurn...@gmail.com> >> >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> >> *Sent:* Saturday, July 16, 2016 3:04 PM >> >> *Subject:* Re: [Ubnt_users] 5 ghz airprism - reports >> >> >> >> Concur with Peter. We are running 8.14beta and running nicely. >> >> >> >> Phil >> >> >> >> On Sat, Jul 16, 2016 at 2:00 PM, Peter Kranz <pkr...@unwiredltd.com> >> wrote: >> >> Run the latest v8 you can get your hands on.. >> >> >> >> -PK >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> *On Behalf Of *CBB - Jay Fuller >> *Sent:* Friday, July 15, 2016 11:49 AM >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> *Subject:* [Ubnt_users] 5 ghz airprism - reports >> >> >> >> >> >> Those of you tinkering with this, what is the best firmware to run >> currently? >> >> What firmware was shown on the big screen demo last November? >> >> was that 8.x beta? >> >> >> >> I just read a thread where bandwidth was dropping and a reboot fixed it. >> >> what known issues are out there and w/ what firmware version? >> >> >> >> Thanks in advance ;) >> >> >> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ------------------------------ >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
