Does latency present a challenge? ----- alex phillips <[email protected]> wrote: > Here is a neighborhood we upgraded to AC. We have full modulation on all > of them > > [image: Inline image 1] > > *Alex Phillips* > CEO and General Manager > RBNS.net > HighSpeedLink.net > *WISPA.org Board of Directors ** (2011-2017)* > *WISPA President (2015-2017)* > *540-908-3993* > > On Fri, Aug 26, 2016 at 3:16 PM, Phil Curnutt <[email protected]> wrote: > > > Steve, If you are contemplating replacing your M5 radios with AC radio of > > the same antenna gain you may want to consider that you need another 10 dB > > of gain with the AC's for full modulation, -65dB is required for AC rather > > then the -75 required for M5. Also, another consideration is the > > modulation rate is also dependent on the CINR, a calculation of the > > difference between the Rx signal and the noise plus interference. A CINR > > of 25db or better, 30 being optimum, will give you full modulation if your > > Rx signal is -65 or better. So, those bigger dishes may be what you want. > > We have found that anything over 1.5 miles requires a PBE-5AC-620, or > > larger, for full modulation when the noise floor is below -90dB. If your > > noise floor is in the 80's, 6X is probably as good as you'll get. > > > > Phil > > > > On Fri, Aug 26, 2016 at 12:36 PM, Shawn Burgei <[email protected]> > > wrote: > > > >> Do all AC CPE have to be at the beta 6 to connect to AC prism with beta 8? > >> > >> Sent from my iPhone > >> > >> On Aug 26, 2016, at 2:01 PM, J Portman <[email protected]> wrote: > >> > >> Running beta 8 on the prism and beta 6 on the cpe you can use any M radio > >> as a client. Powerbeam M, Nanobridge M and Nanostation M are all working > >> for us in this manner. > >> > >> We are doing precisely this as we get ready to transition a large number > >> of people onto the AC product. > >> > >> YMMV, > >> JP > >> > >> > >> *On Fri, 26 Aug 2016 12:45:54 -0400, Clay Stewart wrote* > >> >  LBE‑5AC‑23 ? > >> > > >> > On Thu, Aug 25, 2016 at 8:37 AM, Steve Barnes <[email protected]> > >> wrote: > >> > > >>> > >>> What can you use as a station with the 5ACPrism that is in stock and > >>> bigger than the AC19s? The PB5AC-400 are backordered FOREVER. > >>> > > >>> > Is there other cheaper Dish and radio combos that would work. > >>> > > >>> > Steve Barnes > >>> > Wireless Operations Manager > >>> > PCSWIN.COM <http://pcswin.com/> > >>> > NLBC.COM <http://nlbc.com/> > >>> > > >>> > > >>> > _______________________________________________ > >>> > Ubnt_users mailing list > >>> > [email protected] > >>> > http://lists.wispa.org/mailman/listinfo/ubnt_users > >>> > > >>> > > >> > >> > >> > > >> > >> > > >> > -- > >> > > >> > -- > >> > Clay Stewart, COO/CTO > >> > SCS Broadband > >> > A Division of Acelanet, LLC > >> > 434.263.6363 O > >> > 434.942.6510 C > >> > [email protected] <[email protected]> > >> > [UTF-8?]“We Keep You Up and [UTF-8?]Running†> >> > > >> > Please send sales inquiries to [email protected] > >> > Please send service/repair requests to [email protected] > >> > >> > >> Joe Portman > >> Alamo Broadband Inc. > >> www.alamobroadband.com > >> > >> _______________________________________________ > >> Ubnt_users mailing list > >> [email protected] > >> http://lists.wispa.org/mailman/listinfo/ubnt_users > >> > >> > >> _______________________________________________ > >> Ubnt_users mailing list > >> [email protected] > >> http://lists.wispa.org/mailman/listinfo/ubnt_users > >> > >> > > > > _______________________________________________ > > Ubnt_users mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
