I've seen a lot of discussion on the AF5x's Ethernet issues. The last I knew, UBNT wasn't admitting anything.
----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Shawn C. Peppers" <videodirectwispal...@gmail.com> To: "ubnt users" <ubnt_users@wispa.org> Sent: Sunday, January 22, 2017 6:17:34 AM Subject: [Ubnt_users] Edgepoint16 and AF5x issues Anyone else having issues with compatibility on the Ethernet links between the edgepoint16 and the af5x? I have a few of these setups out there but one tower in specific, i am direct dc powering the edgepoint and for some reason i will randomly loose the ethernet link for random amounts of time to two different AF5xs. Sometimes the interface will flap and sometimes it just goes down and stays down. The devices stays powered and the wireless link stays active. This does not happen at the same time to both radios and I have swapped the cables out which are about 15foot long. I have zero issues with the mimosa b11, any of the 6 ubnt rocket ac prism radios, or any of the powerbeams hooked to this edgepoint also. I was thinking maybe it was the af5x radios but we pulled it down one of them and bench tested it and its fine. Voltage when under load is 52v and i am powering with a meanwell se-48-600. Using a #10 wire at 300 foot....so i feel confident its not a power related issue. Shawn C. Peppers Video Direct Satellite & Entertainment 866-680-8433 Toll Free 480-287-9960 Fax http://www.video-direct.tv _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
