Could be some kind of crosstalk and thinking it's a loop I usually turn off STP unless I know there is multipath in that segment
Sent from iPhone 6S Plus Chris Soiles Owner Rio Cities csoi...@riocities.net 505-966-6389 On Jan 25, 2017, at 5:18 PM, James Wilson <ja...@ridgecomms.com> wrote: We didn't have STP enabled on any of the ports. This is strange - these devices have been working together for a year. It's been stable for several minutes now that I turned off loop protection. Don't see how I could get a loop in one device. ??? Thank for coming to the rescue! :) On Wed, Jan 25, 2017 at 7:15 PM, James Wilson <ja...@ridgecomms.com> wrote: > I just did some Google searches and turned off Loop Protection in the > Devices/Configuration page. So far ok... > > On Wed, Jan 25, 2017 at 7:12 PM, Josh Luthman <j...@imaginenetworksllc.com > > wrote: > >> If you DEFINITELY don't have a bridge loop (like two backhauls going to >> this tower, both of which go to the same collision domain) you can disable >> port 2 from the STP. >> >> >> Josh Luthman >> Office: 937-552-2340 <(937)%20552-2340> >> Direct: 937-552-2343 <(937)%20552-2343> >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Wed, Jan 25, 2017 at 7:09 PM, James Wilson <ja...@ridgecomms.com> >> wrote: >> >>> I have a very straightforward flat network, no OSPF, etc. >>> >>> Tonight I started losing connection and traced it back to a Netonix >>> switch. The connection is up for a minute then the Netonix switch turns off >>> the AF5X's port. >>> >>> Below is what it's log is saying. I don't understand how the AF 5X >>> that's connected to the port can cause a loop. Help! Thanks! :) >>> >>> >>> Jan 25 17:39:37 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 17:42:39 Loop protection: re-enabling port 2 >>> >>> Jan 25 17:43:38 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 17:46:40 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:03:04 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:06:05 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:06:39 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:09:40 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:15:17 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:18:18 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:22:19 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:25:21 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:25:38 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:28:40 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:34:13 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:37:14 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:37:22 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:40:24 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:41:37 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:44:39 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:45:37 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:48:39 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:49:33 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:52:35 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:53:39 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 18:56:41 Loop protection: re-enabling port 2 >>> >>> Jan 25 18:58:36 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> Jan 25 19:00:36 UI: Configuration changed by admin (172.19.3.6) >>> >>> Jan 25 19:00:36 UI: Port 2 STP: changed from 'Disabled' to 'Enabled' >>> >>> Jan 25 19:01:38 Loop protection: re-enabling port 2 >>> >>> Jan 25 19:02:38 Loop protection: detected loop from port 2 to port 2, >>> disabling port 2 for 180 seconds >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
