Security or mayb same ssid broadcast access different sectors?  I have yet to 
find a use for it. 

Shawn C. Peppers
Video Direct Satellite & Entertainment
866-680-8433 Toll Free
480-287-9960 Fax
http://www.video-direct.tv

> On Jan 30, 2017, at 10:11 PM, Jay Weekley <par...@cyberbroadband.net> wrote:
> 
> Is there ever any advantage to using the "Lock to AP MAC" feature?
> 
> Darin Steffl wrote:
>> Don't ever use lock to ap Mac. Seen too many wisps roll trucks when 
>> they replace the ap. Every ssid should be different for every sector.
>> 
>> Also for the client connecting to a weaker signal. That would be fixed 
>> as well if you connected to a specific ssid.
>> On Mon, Jan 30, 2017 at 6:21 PM Jan-OOLLC <j.vank...@oregononline.net 
>> <mailto:j.vank...@oregononline.net>> wrote:
>> 
>>    Update, trying to balance the Rx dbm's at the AP first, by
>>    decreasing transmit power at the CPE.  Noticed that one of the
>>    trouble CPEs was connecting to another tower with same name SSID
>>    even the the signal was 10 dbm weaker.  So I figured if all the
>>    CPEs were configured to lock to the AP mac, they would transfer
>>    over to a new name for SSID.  Ended up doing a lot of driving for
>>    orphans.  Not one of them accepted the new name, all were set to
>>    "lock to AP" mac.  I'm pretty sure with older firmware this used
>>    to work, is this a bug?
>> 
>>    Have tried airControl2 in the past, could not figure out how to
>>    add new CPEs after initial install.  Dude is much easier to use.
>> 
>>    Jan
>> 
>>>    On 01/30/2017 12:03 PM, Nick Bright wrote:
>>>>    On 1/28/2017 11:43 AM, Chris Soiles wrote:
>>>>    I have replaced APs and just named them the same with same
>>>>    security and they just connect
>>>> 
>>>>    I.E.: had rocket with Omni named SSID: radio WPA2: 1234
>>>> 
>>>>    Added a new section, installed 4 APs at New top, named all APs
>>>>    SSID: radio same WPA2
>>>> 
>>>>    Turned off Omni AP
>>>> 
>>>>    As each CPE connected to new AP
>>>>    Login to CPE change SSID to New name for the radio
>>>> 
>>>>    Once all CPEs gone, change name of AP to New name, they all
>>>>    reconnect
>>>    That's what I do too. If things are working well, you could also
>>>    use airControl2 to do it by batch, but you need to ensure that
>>>    all the CPE have reliable connections and are responding properly
>>>    first, or they'll get orphaned.
>>> 
>>>    -- 
>>>    -----------------------------------------------
>>>    -  Nick Bright                                -
>>>    -  Vice President of Technology               -
>>>    -  Valnet -=- We Connect You -=-              -
>>>    -  Tel 888-332-1616 x 315 / Fax 620-331-0789  -
>>>    -  Webhttp://www.valnet.net/                  -
>>>    -----------------------------------------------
>>>    - Are your files safe?                        -
>>>    - Valnet Vault - Secure Cloud Backup          -
>>>    - More information & 30 day free trial at     -
>>>    -http://www.valnet.net/services/valnet-vault  -
>>>    -----------------------------------------------
>>> 
>>>    This email message and any attachments are intended solely for the use 
>>> of the addressees hereof. This message and any attachments may contain 
>>> information that is confidential, privileged and exempt from disclosure 
>>> under applicable law. If you are not the intended recipient of this 
>>> message, you are prohibited from reading, disclosing, reproducing, 
>>> distributing, disseminating or otherwise using this transmission. If you 
>>> have received this message in error, please promptly notify the sender by 
>>> reply E-mail and immediately delete this message from your system.
>>> 
>>> 
>>>    _______________________________________________
>>>    Ubnt_users mailing list
>>>    Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
>>>    http://lists.wispa.org/mailman/listinfo/ubnt_users
>> 
>>    _______________________________________________
>>    Ubnt_users mailing list
>>    Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
>>    http://lists.wispa.org/mailman/listinfo/ubnt_users
>> 
>> -- 
>> Darin Steffl
>> Minnesota WiFi
>> www.mnwifi.com <http://www.mnwifi.com/>
>> 507-634-WiFi
>> <http://www.facebook.com/minnesotawifi> Like us on Facebook 
>> <http://www.facebook.com/minnesotawifi>
>> 
>> 
>> _______________________________________________
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> 
>> 
>> No virus found in this message.
>> Checked by AVG - www.avg.com <http://www.avg.com/email-signature>
>> Version: 2016.0.7998 / Virus Database: 4756/13866 - Release Date: 01/30/17
>> 
> 
> _______________________________________________
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to