Only with AirRouter are we seeing an issue, improvements on all radios. On Fri, Mar 3, 2017 at 8:52 PM, Rory Conaway <r...@triadwireless.net> wrote:
> That’s weird guys, We’ve done hundreds of radios and haven’t seen the > issue including 900Mhz where we believe there was an improvement. > > > > Rory > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *RickG > *Sent:* Friday, March 3, 2017 5:36 PM > *To:* Ubiquiti Users Group > *Subject:* Re: [Ubnt_users] ISSUE AirRouter > > > > Ditto but I backed down to 5.6.9. Why go all the way back to 5.5.11? > > > > On Fri, Mar 3, 2017 at 6:31 PM, Mitch <mi...@abetterwireless.com> wrote: > > Clay > > We have seen the same thing with 6.0 and also XM devices crashing > > So far the 6.0 has not worked well with any of our 2.4 or 900 > > XW we have seen power drops and crashing. > > We have backed all air routers down to 5.5.11 and they are working great > now. > > We are working with the DEV firmwares and so far no changes > > Also are testing the new GEN2 AC and so far looks great!! > > Mitch Koep > > 218-851-8689 <(218)%20851-8689> cell > > > > > > On 03/03/2017 04:17 PM, Clay Stewart wrote: > > Never use AirGrids, sorry. > > > > On Fri, Mar 3, 2017 at 3:43 PM, Steve Barnes <st...@pcswin.com> wrote: > > We are seeing Older AirGrids lose ½ their power after going to 6.0 and > also seeing many more Crash reports with XM radios. > > > > *Steve Barnes* > > Wireless Operations Manager > > *New Lisbon Broadband* > > *NLBC.COM <http://NLBC.COM>* > > *PCSWIN.COM <http://PCSWIN.COM>* > > 765-584-2288 ext:1101 <%28765%29%20584-2288> > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *Clay Stewart > *Sent:* Friday, March 03, 2017 3:22 PM > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > *Subject:* [Ubnt_users] ISSUE AirRouter > > > > We had a major issue today with 17 installs today where as the AirRouter > stops working after a minute or so after (or before) upgraded 6.00 > firmware. If we down grade, it works. If we setup below 6.00 it works, then > upgrade it fails. We do not have this happening on hundreds of wireless > static IP customers. This is happening on one of our fiber networks which > is private IP DHCP. > > > > Clueless here, have any.... clues that is? > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > _______________________________________________ > > Ubnt_users mailing list > > Ubnt_users@wispa.org > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > -- > > Mitch Koep > > > > A Better Wireless > > 218-851-8689 <(218)%20851-8689> cell > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > -- > > -RickG > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users