My understanding is it is a code change in 6.0.4, and waiting for future versions of aircontrol probably won't fix it. I just don't want to login to 300+ radios / access points to change firmware. Ugh!
I did notice you can do a broadcast from a manually entered device - but that does not appear to work - or it does not find the equipment... ----- Original Message ----- From: Troy Gibson, Byhalia.net,LLC To: Ubiquiti Users Group Sent: Thursday, August 31, 2017 12:58 PM Subject: Re: [Ubnt_users] aircontrol won't find 6.0.4 devices I'm on AC2.1 beta 7 and it won't find any 6.0.4 radios, XW or XM. I had some being monitored on beta 6, so those are still monitored, but show in devices not found column of discovery. TCP scan only showed prism radios too. I downgraded to 5.6.15 and it was discovered. I had to downgrade AP and CPE for it to discover the devices on AC. Now to search for the missing radios!! Troy Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: CBB - Jay Fuller <par...@cyberbroadband.net> Date: 8/31/17 1:25 PM (GMT-05:00) To: Ubiquiti Users Group <ubnt_users@wispa.org> Subject: [Ubnt_users] aircontrol won't find 6.0.4 devices Been reading all about it in the ubnt forums - but anyone have any suggestions around this? Thought I'd post it here too - Haven't run aircontrol since about 18 months ago. About nine months ago I attempted to upgrade to the then current beta but it basically corrupted my database and would not even start the server service. Last night late I started over again from scratch. Ran into the 6.0.4 problem as one of my network segments (from a recent purchase) we have manually changed the ip addresses and put them all on 6.0.4 A different segment is still running 5.6.3. I was planning to move them all to 6.0.4 and also make a mass change of the username / password. Left discovering overnight, found all the devices on 5.6.3 on that particular network segment but did not find any 6.0.4 Today once googling and discovering this issue I downgraded an AP from 6.0.4 to 5.6.3 and discovery found it immediately. I don't want to do this to 300 devices. Aircontrol v.2.0.2.2874.170719.18353 is running on a public IP within our network. I tried to new feature tcp scan but no luck (probably because the server is in public ip space). I thought about temporarily changing the IP but then radios would be reporting to the wrong IP. I can manually add the device but have not found a way to do that in bulk. I don't know if it is easier for me to upgrade to something higher than 6.0.4 on all of my devices and use discovery or to manually add 300+ devices. I am hoping for another option. Bueller? Bueller? Thanks ------------------------------------------------------------------------------ _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users