Hi Guys, This is most likely due to this change in discovery in 6.0.4. We're adding CGN address space in 6.0.7, so moving forward, you will only be able to discover from RFC1918 and RFC6598 address. IP range scanning should still work.
- Fix: Limit discovery response to queries from private subnets or multicast/broadcast On Thu, Aug 31, 2017 at 1:58 PM, Troy Gibson, Byhalia.net,LLC < t...@byhalia.net> wrote: > I'm on AC2.1 beta 7 and it won't find any 6.0.4 radios, XW or XM. I had > some being monitored on beta 6, so those are still monitored, but show in > devices not found column of discovery. TCP scan only showed prism radios > too. > > I downgraded to 5.6.15 and it was discovered. I had to downgrade AP and > CPE for it to discover the devices on AC. Now to search for the missing > radios!! > > > Troy > > > > > > Sent from my Verizon, Samsung Galaxy smartphone > > -------- Original message -------- > From: CBB - Jay Fuller <par...@cyberbroadband.net> > Date: 8/31/17 1:25 PM (GMT-05:00) > To: Ubiquiti Users Group <ubnt_users@wispa.org> > Subject: [Ubnt_users] aircontrol won't find 6.0.4 devices > > > Been reading all about it in the ubnt forums - but anyone have any > suggestions around this? > > Thought I'd post it here too - > > Haven't run aircontrol since about 18 months ago. About nine months ago I > attempted to upgrade to the then current beta but it basically corrupted my > database and would not even start the server service. Last night late I > started over again from scratch. Ran into the 6.0.4 problem as one of my > network segments (from a recent purchase) we have manually changed the ip > addresses and put them all on 6.0.4 > > > A different segment is still running 5.6.3. I was planning to move them > all to 6.0.4 and also make a mass change of the username / password. > > > > Left discovering overnight, found all the devices on 5.6.3 on that > particular network segment but did not find any 6.0.4 > > > > Today once googling and discovering this issue I downgraded an AP from > 6.0.4 to 5.6.3 and discovery found it immediately. > > > > I don't want to do this to 300 devices. > > > > Aircontrol v.2.0.2.2874.170719.18353 is running on a public IP within our > network. > > > > I tried to new feature tcp scan but no luck (probably because the server > is in public ip space). > > > I thought about temporarily changing the IP but then radios would be > reporting to the wrong IP. > > > > I can manually add the device but have not found a way to do that in bulk. > > > > I don't know if it is easier for me to upgrade to something higher than > 6.0.4 on all of my devices and use discovery or to manually add 300+ > devices. I am hoping for another option. > > > > Bueller? Bueller? > > > > Thanks > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
