Was the new radio setup in the office or was it an on-site setup?  Could be bad 
radio. Water in the line, cable not plugged in well at top.  No matter what I 
would expect a climb.  Setup a new one in office and make sure it is good. 
Climb swap it first see what you get.  Re-terminate. And rerun if nothing else. 
 Any spare cables?

Steve Barnes
Wireless Ops Manager
NLBC.com

From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of RickG
Sent: Monday, November 6, 2017 11:59 PM
To: Ubiquiti Users Group <ubnt_users@wispa.org>
Subject: Re: [Ubnt_users] Rocket M2 ethernet link problem.

Jay, It sounds like you've done everything except test the cable end to end 
with a good tester which is the first thing I'd do. After that, I'd swap out 
the RM2.

On Mon, Nov 6, 2017 at 8:36 PM, Jay Weekley 
<par...@cyberbroadband.net<mailto:par...@cyberbroadband.net>> wrote:
We lost a Ubiquiti Rocket M2 during a storm. We replaced it with a "new"
out of box M2 but it won't link with the 10/100/1000 switch. When the
techs bypass the switch they get a 10 megabit link but not 100 megabit
and can access the radio on their laptop but moving the radio back to
the switch and nothing. For trouble shooting they tried the following
but nothing gave them a link to the switch:
- swapping the switch with another 10/100/1000 unit.
- swapping patch cords
- replacing the power supply.
- forcing the radio to 10 megabit full.
- resetting and reprogramming the radio.
- re-terminating the lower end of the cable run.
Is this a cable issue? It's a 2 month old Shireen Cat 6 run so I hate to
think it's bad already. The weather isn't going to make another tower
climb likely for the next few days so we need to get it to link with the
switch for a little while. Any suggestions on how to do that? Find an
old 10/100 switch?
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users



--
-RickG
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to