Switches that have air fibers attached to them…. From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Jon Langeler Sent: Monday, February 19, 2018 7:35 PM To: Ubiquiti Users Group <ubnt_users@wispa.org> Subject: Re: [Ubnt_users] MTU
Are you disabling pause everywhere? Or just Airfiber? Jon Langeler Michwave Technologies, Inc. On Feb 19, 2018, at 9:01 PM, Chris J. Ruschmann <ch...@scsalaska.net<mailto:ch...@scsalaska.net>> wrote: Have you tried disabling Pause Frames on the Netonix switch? We’ve had an issues with Airfibers and that feature on a few sites. From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, February 19, 2018 10:56 AM To: Ubiquiti Users Group <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>> Subject: Re: [Ubnt_users] MTU Yeah everything is on AIRcontrol. Just can figure it out. At peak times I can run TCP Btest from PC through CPE to Router on Local tower2 and get 45-50 Meg. (10Mhz channel) Btest from Router Tower2 to Router tower1 and get 200Meg. (AF5x link 250M capacity Only 50-100M used). Tower 1 Connected to GB fiber and can get 700Meg to Dist router at Core due to traffic. But from PC through all to Dist router I can only get 8 Mbps at night. During the morning when traffic is low I can get 45Mbps. So has to be buffer, retry, MTU, cpu, etc. but I cant pin point it. Ping times stay pretty stable. AMQ and AMC really good on this AP, 90%+. Giving some serious thought to Preseem. Steve Barnes Wireless Operations Manager New Lisbon Broadband NLBC.COM<http://NLBC.COM> PCSWIN.COM<http://PCSWIN.COM> 765-584-2288 ext:1101 From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Chris J. Ruschmann Sent: Monday, February 19, 2018 1:34 PM To: Ubiquiti Users Group <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>> Subject: Re: [Ubnt_users] MTU Are you running air control or anything else that can aggregate the performance of your site in some nice easy to read graphs? From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Monday, February 19, 2018 7:38 AM To: Ubiquiti Users Group <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>> Subject: [Ubnt_users] MTU I am trying to get every last drop out of our internet. Most towers have a MikroTik Routing, Netonix doing POE and Switching, Fed by AF5x, and Rockets or Prism for AP’s. Sometimes seeing some slow downs I cant account for. Wondering if MTU or Flow control needs adjusted. The MTU settings are as follows: MikroTik MTU: 1500 L2 MTU: 1598 Flow Disabled Netonix MTU: 1528 Both AF5x Up to 9600 Auto Flow Disabled Rocket MTU: 1500 Flow Disabled Prism MTU: 1500 Flow Disabled In your experience should any of these be adjusted? Steve Barnes Wireless Operations Manager New Lisbon Broadband NLBC.COM<http://NLBC.COM> PCSWIN.COM<http://PCSWIN.COM> 765-584-2288 ext:1101 _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users