I thought it was the entire collision domain? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Feb 20, 2018 10:17 PM, "RickG" <rgunder...@gmail.com> wrote: > Wait...on the switch (1 or all ports?) or on the Airfiber itself? I turn > it off only the Airfiber = no more errors. So far, I haven't determined the > need for flow control on my switches yet. (Which is why I'm asking ;) > > On Tue, Feb 20, 2018 at 12:55 PM, Chris J. Ruschmann <ch...@scsalaska.net> > wrote: > >> Switches that have air fibers attached to them…. >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> *On Behalf Of *Jon Langeler >> *Sent:* Monday, February 19, 2018 7:35 PM >> >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> *Subject:* Re: [Ubnt_users] MTU >> >> >> >> Are you disabling pause everywhere? Or just Airfiber? >> >> Jon Langeler >> >> Michwave Technologies, Inc. >> >> >> >> >> On Feb 19, 2018, at 9:01 PM, Chris J. Ruschmann <ch...@scsalaska.net> >> wrote: >> >> Have you tried disabling Pause Frames on the Netonix switch? We’ve had an >> issues with Airfibers and that feature on a few sites. >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org >> <ubnt_users-boun...@wispa.org>] *On Behalf Of *Steve Barnes >> *Sent:* Monday, February 19, 2018 10:56 AM >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> *Subject:* Re: [Ubnt_users] MTU >> >> >> >> Yeah everything is on AIRcontrol. Just can figure it out. >> >> >> >> At peak times I can run TCP Btest from PC through CPE to Router on Local >> tower2 and get 45-50 Meg. (10Mhz channel) >> >> >> >> Btest from Router Tower2 to Router tower1 and get 200Meg. (AF5x link >> 250M capacity Only 50-100M used). >> >> >> Tower 1 Connected to GB fiber and can get 700Meg to Dist router at Core >> due to traffic. >> >> >> >> But from PC through all to Dist router I can only get 8 Mbps at night. >> During the morning when traffic is low I can get 45Mbps. So has to be >> buffer, retry, MTU, cpu, etc. but I cant pin point it. Ping times stay >> pretty stable. AMQ and AMC really good on this AP, 90%+. >> >> >> >> Giving some serious thought to Preseem. >> >> >> >> *Steve Barnes* >> >> Wireless Operations Manager >> >> *New Lisbon Broadband* >> >> *NLBC.COM <http://NLBC.COM>* >> >> *PCSWIN.COM <http://PCSWIN.COM>* >> >> 765-584-2288 ext:1101 <(765)%20584-2288> >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org >> <ubnt_users-boun...@wispa.org>] *On Behalf Of *Chris J. Ruschmann >> *Sent:* Monday, February 19, 2018 1:34 PM >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> *Subject:* Re: [Ubnt_users] MTU >> >> >> >> Are you running air control or anything else that can aggregate the >> performance of your site in some nice easy to read graphs? >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org >> <ubnt_users-boun...@wispa.org>] *On Behalf Of *Steve Barnes >> *Sent:* Monday, February 19, 2018 7:38 AM >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> *Subject:* [Ubnt_users] MTU >> >> >> >> I am trying to get every last drop out of our internet. Most towers have >> a MikroTik Routing, Netonix doing POE and Switching, Fed by AF5x, and >> Rockets or Prism for AP’s. Sometimes seeing some slow downs I cant account >> for. Wondering if MTU or Flow control needs adjusted. >> >> >> >> The MTU settings are as follows: >> >> MikroTik MTU: 1500 L2 MTU: 1598 Flow Disabled >> >> Netonix MTU: 1528 Both >> >> AF5x Up to 9600 Auto Flow Disabled >> >> Rocket MTU: 1500 Flow Disabled >> >> Prism MTU: 1500 Flow Disabled >> >> >> >> In your experience should any of these be adjusted? >> >> >> >> *Steve Barnes* >> >> Wireless Operations Manager >> >> *New Lisbon Broadband* >> >> *NLBC.COM <http://NLBC.COM>* >> >> *PCSWIN.COM <http://PCSWIN.COM>* >> >> 765-584-2288 ext:1101 <(765)%20584-2288> >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > > > -- > -RickG > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users