is there anything linked to snd_hda_codec_realtek ? Can you unload it with sudo modprobe -r
Nod a mod but the problem I had was also related to a realtek module if I remember correctly.. david On Mon, Nov 30, 2009 at 12:39 PM, szemy <sz.tom...@gmail.com> wrote: > After further investigating the problem, it happens all the time after > wakeup... > could it be the fglrx package? > > [ 2041.321047] eth0: auto-negotiating... > [ 2051.344049] eth0: auto-negotiating... > [ 2055.950844] wlan0: disassociating by local choice (reason=3) > [ 2055.988088] wlan0: deauthenticating by local choice (reason=3) > [ 2057.726291] PM: Syncing filesystems ... done. > [ 2057.732153] PM: Preparing system for mem sleep > [ 2057.732158] Freezing user space processes ... (elapsed 0.00 seconds) done. > [ 2057.732842] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) > done. > [ 2057.732875] PM: Entering mem sleep > [ 2057.732893] Suspending console(s) (use no_console_suspend to debug) > [ 2057.760269] btusb_bulk_complete: hci0 urb f696f700 failed to resubmit (1) > [ 2057.761262] btusb_bulk_complete: hci0 urb f696f400 failed to resubmit (1) > [ 2057.762261] btusb_intr_complete: hci0 urb f696fb80 failed to resubmit (1) > [ 2058.231422] sd 0:0:0:0: [sda] Synchronizing SCSI cache > [ 2058.231521] sd 0:0:0:0: [sda] Stopping disk > [ 2058.957649] ath5k 0000:02:00.0: PCI INT A disabled > [ 2058.972033] [fglrx] Power down the ASIC . > [ 2058.972060] [fglrx] Preparing suspend fglrx in kernel. > [ 2058.972066] ------------[ cut here ]------------ > [ 2058.972074] WARNING: at /build/buildd/linux-2.6.31/mm/page_alloc.c:1751 > __alloc_pages_slowpath+0x459/0x480() > [ 2058.972076] Hardware name: F5SL > [ 2058.972078] Modules linked in: binfmt_misc ppdev bridge stp bnep > snd_hda_codec_si3054 snd_hda_codec_realtek joydev arc4 ecb snd_hda_intel > snd_hda_codec snd_hwdep ath5k snd_pcm_oss snd_mixer_oss mac80211 snd_pcm ath > snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq > snd_timer uvcvideo vhba lp videodev snd_seq_device sis190 snd psmouse > iptable_filter soundcore snd_page_alloc parport fglrx(P) mii btusb serio_raw > asus_laptop led_class v4l1_compat ip_tables cfg80211 x_tables dm_raid45 xor > usbhid usb_storage video output sis_agp agpgart > [ 2058.972116] Pid: 2733, comm: pm-suspend Tainted: P > 2.6.31-15-generic #50-Ubuntu > [ 2058.972119] Call Trace: > [ 2058.972125] [<c014518d>] warn_slowpath_common+0x6d/0xa0 > [ 2058.972129] [<c01b8429>] ? __alloc_pages_slowpath+0x459/0x480 > [ 2058.972132] [<c01b8429>] ? __alloc_pages_slowpath+0x459/0x480 > [ 2058.972135] [<c01451d5>] warn_slowpath_null+0x15/0x20 > [ 2058.972138] [<c01b8429>] __alloc_pages_slowpath+0x459/0x480 > [ 2058.972141] [<c01b7e50>] ? get_page_from_freelist+0x1e0/0x360 > [ 2058.972144] [<c01b855f>] __alloc_pages_nodemask+0x10f/0x120 > [ 2058.972147] [<c01b85b7>] __get_free_pages+0x17/0x30 > [ 2058.972151] [<c01e088f>] __kmalloc+0xdf/0x180 > [ 2058.972205] [<f8568900>] KCL_MEM_SmallBufferAllocAtomic+0x10/0x20 [fglrx] > [ 2058.972249] [<f8579ebb>] firegl_save_fb+0x3b/0x1a0 [fglrx] > [ 2058.972293] [<f8578f86>] ? firegl_pm_save_framebuffer+0x246/0x2d0 [fglrx] > [ 2058.972341] [<f859b244>] ? > firegl_cmmqs_recoverable_surface_info+0xc4/0xd0 [fglrx] > [ 2058.972385] [<f857c131>] ? firegl_cail_powerdown+0xd1/0x240 [fglrx] > [ 2058.972392] [<c0160dc4>] ? down+0x24/0x40 > [ 2058.972426] [<f85642c2>] ? fglrx_pci_suspend+0x82/0x140 [fglrx] > [ 2058.972437] [<c0328951>] ? pci_legacy_suspend+0x31/0xc0 > [ 2058.972442] [<c0365f30>] ? acpi_ut_release_mutex+0x54/0x58 > [ 2058.972446] [<c035cd99>] ? acpi_get_data+0x51/0x60 > [ 2058.972449] [<c03491b9>] ? acpi_bus_data_handler+0x0/0x5 > [ 2058.972452] [<c0329164>] ? pci_pm_suspend+0xa4/0xf0 > [ 2058.972455] [<c0348b0a>] ? acpi_bus_set_power+0x30/0x17c > [ 2058.972459] [<c03a6549>] ? pm_op+0x129/0x170 > [ 2058.972461] [<c0160dc4>] ? down+0x24/0x40 > [ 2058.972464] [<c03a6aa0>] ? device_suspend+0xb0/0x110 > [ 2058.972468] [<c0312222>] ? kobject_get+0x12/0x20 > [ 2058.972471] [<c03a6ba2>] ? dpm_suspend+0xa2/0x110 > [ 2058.972474] [<c03a6c2d>] ? dpm_suspend_start+0x1d/0x30 > [ 2058.972478] [<c0174c14>] ? suspend_devices_and_enter+0x54/0xd0 > [ 2058.972482] [<c056ea0c>] ? printk+0x18/0x1c > [ 2058.972485] [<c0174d49>] ? enter_state+0xb9/0xf0 > [ 2058.972487] [<c017443d>] ? state_store+0x6d/0xb0 > [ 2058.972490] [<c01743d0>] ? state_store+0x0/0xb0 > [ 2058.972493] [<c0311f30>] ? kobj_attr_store+0x20/0x30 > [ 2058.972498] [<c0239750>] ? sysfs_write_file+0x90/0x100 > [ 2058.972501] [<c01e791a>] ? vfs_write+0x9a/0x190 > [ 2058.972504] [<c02396c0>] ? sysfs_write_file+0x0/0x100 > [ 2058.972508] [<c057333b>] ? do_page_fault+0x19b/0x380 > [ 2058.972511] [<c01e83dd>] ? sys_write+0x3d/0x70 > [ 2058.972514] [<c010336c>] ? syscall_call+0x7/0xb > [ 2058.972516] ---[ end trace 58c7db6698925980 ]--- > [ 2059.402506] [fglrx] Suspending fglrx in kernel completed. > [ 2059.402614] HDA Intel 0000:00:0f.0: PCI INT A disabled > [ 2059.416048] sata_sis 0000:00:05.0: PCI INT A disabled > [ 2059.416054] sis190 0000:00:04.0: PCI INT A disabled > [ 2059.416064] ehci_hcd 0000:00:03.3: PCI INT C disabled > [ 2059.416072] ohci_hcd 0000:00:03.1: PCI INT B disabled > [ 2059.416078] ohci_hcd 0000:00:03.0: PCI INT A disabled > [ 2059.416191] ata4: port disabled. ignoring. > [ 2059.432117] PM: suspend devices took 1.700 seconds > [ 2059.432435] ehci_hcd 0000:00:03.3: PME# disabled > [ 2059.449720] ACPI: Preparing to enter system sleep state S3 > [ 2059.804384] Disabling non-boot CPUs ... > [ 2059.908026] CPU 1 is now offline > [ 2059.908029] SMP alternatives: switching to UP code > [ 2059.914262] CPU0 attaching NULL sched-domain. > [ 2059.914265] CPU1 attaching NULL sched-domain. > [ 2059.914271] CPU0 attaching NULL sched-domain. > [ 2059.914467] CPU1 is down > [ 2059.914475] x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > [ 2059.914475] Back to C! > [ 2059.914475] CPU0: Thermal monitoring handled by SMI > [ 2059.914475] Enabling non-boot CPUs ... > [ 2059.914475] SMP alternatives: switching to SMP code > [ 2059.920593] Booting processor 1 APIC 0x1 ip 0x6000 > [ 2059.914103] Initializing CPU#1 > [ 2059.914103] Calibrating delay using timer specific routine.. 3998.53 > BogoMIPS (lpj=7997061) > [ 2059.914103] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 2059.914103] CPU: L2 cache: 2048K > [ 2059.914103] CPU: Physical Processor ID: 0 > [ 2059.914103] CPU: Processor Core ID: 1 > [ 2059.914103] mce: CPU supports 6 MCE banks > [ 2059.914103] CPU1: Thermal monitoring enabled (TM2) > [ 2059.914103] x86 PAT enabled: cpu 1, old 0x7040600070406, new > 0x7010600070106 > [ 2060.009853] CPU1: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz stepping > 0d > [ 2060.009937] CPU0 attaching NULL sched-domain. > [ 2060.012018] Switched to high resolution mode on CPU 1 > [ 2060.024017] CPU0 attaching sched-domain: > [ 2060.024020] domain 0: span 0-1 level MC > [ 2060.024022] groups: 0 1 > [ 2060.024027] CPU1 attaching sched-domain: > [ 2060.024028] domain 0: span 0-1 level MC > [ 2060.024031] groups: 1 0 > [ 2060.027604] CPU1 is up > [ 2060.027607] ACPI: Waking up from system sleep state S3 > [ 2060.756009] Clocksource tsc unstable (delta = -500000264 ns) > [ 2060.984291] pcieport-driver 0000:00:01.0: restoring config space at offset > 0x7 (was 0xd1d1, writing 0x2000d1d1) > [ 2060.984302] pcieport-driver 0000:00:01.0: restoring config space at offset > 0x1 (was 0x100107, writing 0x100507) > [ 2060.984404] ohci_hcd 0000:00:03.0: restoring config space at offset 0x1 > (was 0x2800117, writing 0x2800113) > [ 2060.984431] ohci_hcd 0000:00:03.1: restoring config space at offset 0x1 > (was 0x2800117, writing 0x2800113) > [ 2061.000030] ehci_hcd 0000:00:03.3: restoring config space at offset 0xf > (was 0x50000300, writing 0x50000303) > [ 2061.000047] ehci_hcd 0000:00:03.3: restoring config space at offset 0x3 > (was 0x0, writing 0x4008) > [ 2061.000053] ehci_hcd 0000:00:03.3: restoring config space at offset 0x1 > (was 0x2900000, writing 0x2900102) > [ 2061.000066] ehci_hcd 0000:00:03.3: PME# disabled > [ 2061.000092] sis190 0000:00:04.0: restoring config space at offset 0x1 (was > 0x2100007, writing 0x2100003) > [ 2061.000116] sata_sis 0000:00:05.0: restoring config space at offset 0x9 > (was 0x1, writing 0xb401) > [ 2061.000129] sata_sis 0000:00:05.0: restoring config space at offset 0x1 > (was 0x2100005, writing 0x2100001) > [ 2061.000166] pcieport-driver 0000:00:06.0: restoring config space at offset > 0x7 (was 0x1f1, writing 0x200001f1) > [ 2061.000176] pcieport-driver 0000:00:06.0: restoring config space at offset > 0x1 (was 0x100106, writing 0x100506) > [ 2061.000239] pcieport-driver 0000:00:07.0: restoring config space at offset > 0x1 (was 0x100107, writing 0x100507) > [ 2061.000292] HDA Intel 0000:00:0f.0: restoring config space at offset 0x1 > (was 0x2100006, writing 0x2100002) > [ 2061.000344] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 > (was 0x100107, writing 0x100503) > [ 2061.026479] ata4: port disabled. ignoring. > [ 2061.026494] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ > 20 > [ 2061.026965] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is > beyond end of object 20090521 exoparg2-445 > [ 2061.026975] ACPI Error (psparse-0537): Method parse/execution failed > [\_SB_.PCI0.IDEC.IDE0._STM] (Node f70108d0), AE_AML_PACKAGE_LIMIT > [ 2061.027031] ata3: ACPI set timing mode failed (status=0x300b) > [ 2061.027249] ata3: port disabled. ignoring. > [ 2061.048031] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ > 21 > [ 2061.072030] ehci_hcd 0000:00:03.3: PME# disabled > [ 2061.072035] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ > 22 > [ 2061.072055] sis190 0000:00:04.0: PME# disabled > [ 2061.072059] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 2061.072064] sis190 0000:00:04.0: setting latency timer to 64 > [ 2061.072070] sata_sis 0000:00:05.0: PME# disabled > [ 2061.072074] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ > 17 > [ 2061.072086] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> > IRQ 18 > [ 2061.072091] HDA Intel 0000:00:0f.0: setting latency timer to 64 > [ 2061.072156] fglrx_pci 0000:01:00.0: setting latency timer to 64 > [ 2061.079018] [fglrx] Preparing resume fglrx in kernel. > [ 2061.111396] [fglrx] Resuming fglrx in kernel completed. > [ 2061.111401] [fglrx] Power up the ASIC > [ 2061.111619] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 2061.453838] sd 0:0:0:0: [sda] Starting disk > [ 2061.800029] usb 3-3: reset full speed USB device using ohci_hcd and > address 3 > [ 2062.070072] btusb 3-3:1.0: no reset_resume for driver btusb? > [ 2062.070074] btusb 3-3:1.1: no reset_resume for driver btusb? > [ 2062.320446] PM: resume devices took 1.320 seconds > [ 2062.320626] PM: Finishing wakeup. > [ 2062.320627] Restarting tasks ... done. > [ 2062.758296] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 2062.855305] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 2063.420869] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt > source ff000066 is not supported on this hardware (return code = 1) > [ 2072.789023] eth0: auto-negotiating... > [ 2074.558226] wlan0: authenticate with AP 00:19:cb:e1:29:10 > [ 2074.563841] wlan0: authenticated > [ 2074.563847] wlan0: associate with AP 00:19:cb:e1:29:10 > [ 2074.566655] wlan0: RX AssocResp from 00:19:cb:e1:29:10 (capab=0x421 > status=0 aid=1) > [ 2074.566660] wlan0: associated > [ 2074.567386] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 2082.813023] eth0: auto-negotiating... > [ 2085.493021] wlan0: no IPv6 routers present > [ 2092.837027] eth0: auto-negotiating... > [ 2102.861023] eth0: auto-negotiating... > > -- > ksoftirqd/1 using 50% CPU or above > https://bugs.launchpad.net/bugs/183461 > You received this bug notification because you are a direct subscriber > of the bug. > -- ksoftirqd/1 using 50% CPU or above https://bugs.launchpad.net/bugs/183461 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs