Note that not all hardware supports this feature (both the controller and the codec need to support it).
On Wed, May 19, 2010 at 7:00 PM, David Henningsson <launchpad....@epost.diwic.se> wrote: > In fact, I have hardware somewhat similar to yours (Realtek ALC888, > motherboard GA-MA770T-UD3P), so I decided to give it a try here. I can > successfully record two channels simultaneously: I first set up > alsamixer to have one capture be the mic and the other line-in, and > levels at 0 dB. I then opened two terminal windows and ran the following > two commands in parallell: > > arecord -d 10 -f cd -t wav -D plughw:0,0 foobar0.wav > arecord -d 10 -f cd -t wav -D plughw:0,2 foobar2.wav > > ...and both line and mic were recorded appropriately. Can you confirm > that the same applies to you? > > The pulseaudio layer, however, does not support that out of the box. (I guess > this could be a design decision, to try to make things as simple as > possible...) > Perhaps it is possible by tweaking the PA configuration files...let me > meditate on that :-) -- Multiple capture in same card are not used https://bugs.launchpad.net/bugs/582849 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs