no way the only difference is that with the option "soft-reset" the job appears immediately as printed, like if all was sent to the printer, but nothing gets printed
this happens with all combinations of the 3 parameters whenever "soft-reset" is present for the rest, without "soft-reset", no change at all I am investigating how to connect the printer as a network printer via the router, still not successfull.... El 13/11/13 15:19, Till Kamppeter escribió: > Try the following: > > First, follow the instructions of the section "USB printer does not > print or prints garbage" on > https://wiki.ubuntu.com/DebuggingPrintingProblems, especially the steps > 2 and 3. > > Does one of these changes help? Which one. Try also both options > together. > > If nothing helps, boot 13.10 and edit the file > /usr/share/cups/usb/org.cups.usb-quirks, adding a line like one of these > (only one of them at the same time): > > 050d 0002 unidir > 050d 0002 no-reattach > 050d 0002 soft-reset > > try also combinations by adding more than one option in one line (but it > must stay only one line for your device): > > 050d 0002 unidir no-reattach > 050d 0002 unidir no-reattach soft-reset > > Try also other combinations. > > For each attempt save the file, re-plug the cable/printer, print several > jobs. Which settings make it work for you? > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1249627 Title: usb to parallel prints only once To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1249627/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
