Sure I can do that: dmesg log: [ 15.894763] usb 2-1.1: new low-speed USB device number 7 using ehci-pci [ 15.994984] usb 2-1.1: New USB device found, idVendor=045e, idProduct=00e1 [ 15.994996] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 15.995005] usb 2-1.1: Product: Microsoft Notebook Receiver v2.0 [ 15.995013] usb 2-1.1: Manufacturer: Microsoft [ 16.007331] input: Microsoft Microsoft Notebook Receiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input17 [ 16.007703] hid-generic 0003:045E:00E1.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Receiver v2.0] on usb-0000:00:1d.0-1.1/input0 [ 213.223678] usb 2-1.3: new high-speed USB device number 8 using ehci-pci [ 213.316395] usb 2-1.3: New USB device found, idVendor=1554, idProduct=5010 [ 213.316404] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 213.316410] usb 2-1.3: Product: STK807X [ 213.316414] usb 2-1.3: Manufacturer: DiBcom [ 213.316419] usb 2-1.3: SerialNumber: 016 [ 213.410882] dvb-usb: found a 'Prolink Pixelview SBTVD' in cold state, will try to load a firmware [ 213.411448] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 213.613677] dib0700: firmware started successfully. [ 214.116168] dvb-usb: found a 'Prolink Pixelview SBTVD' in warm state. [ 214.116273] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 214.116463] DVB: registering new adapter (Prolink Pixelview SBTVD) [ 214.378670] usb 2-1.3: DVB: registering adapter 0 frontend 0 (DiBcom 8000 ISDB-T)... [ 214.611976] DiB0070: successfully identified [ 214.639941] Registered IR keymap rc-dib0700-nec [ 214.640122] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0/input18 [ 214.640249] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0 [ 214.640478] dvb-usb: schedule remote query interval to 50 msecs. [ 214.640487] dvb-usb: Prolink Pixelview SBTVD successfully initialized and connected. [ 214.640792] usbcore: registered new interface driver dvb_usb_dib0700
I started Kaffeine from a terminal, and I got the following logs when I tried to scan channels. Kaffeine output: kaffeine(4116) DvbLinuxDevice::tune: ioctl FE_SET_FRONTEND failed for frontend "/dev/dvb/adapter0/frontend0" kaffeine(4116) DvbLinuxDevice::tune: ioctl FE_SET_FRONTEND failed for frontend "/dev/dvb/adapter0/frontend0" kaffeine(4116) DvbLinuxDevice::tune: ioctl FE_SET_FRONTEND failed for frontend "/dev/dvb/adapter0/frontend0" kaffeine(4116) DvbLinuxDevice::tune: ioctl FE_SET_FRONTEND failed for frontend "/dev/dvb/adapter0/frontend0" And also for each message that I received on the terminal, I got one of this on syslog: usb 2-1.3: dtv_property_cache_sync: doesn't know how to handle a DVBv3 call to delivery system 0 If you need something else, let me know. I will be happy to assist you. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1241842 Title: scanning with dvb s/s2 card broken To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/kaffeine/+bug/1241842/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs