Public bug reported:
I've got a "Lexar Professional Workflow XR1" CF card reader that
supports USB3, and has worked fine for regular JPG/CR2 images (sizes up
to about 20 MB), but when I tried some videos (which were 170MB and up),
the copy would fail around midway with "Error Splicing File:
Input/Output Error" from Thunar, and dmesg showed messages like:
[ +9,232995] usb 2-3: Disable of device-initiated U1 failed.
[ +5,006028] usb 2-3: Disable of device-initiated U2 failed.
[ +0,168540] usb 2-3: reset SuperSpeed USB device number 10 using xhci_hcd
[ +1,126795] sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ +0,000011] sd 12:0:0:0: [sdb] Sense Key : Unit Attention [current]
[ +0,000007] sd 12:0:0:0: [sdb] Add. Sense: Not ready to ready change, medium
may have changed
[ +0,000006] sd 12:0:0:0: [sdb] CDB: Read(10) 28 00 00 67 53 ce 00 00 02 00
[ +0,000005] blk_update_request: I/O error, dev sdb, sector 6771662
[ +0,000008] Buffer I/O error on dev sdb1, logical block 3385704, async page
read
[ +10,494574] usb 2-3: Disable of device-initiated U1 failed.
[ +5,006046] usb 2-3: Disable of device-initiated U2 failed.
[ +0,168624] usb 2-3: reset SuperSpeed USB device number 10 using xhci_hcd
[ +1,126823] sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ +0,000009] sd 12:0:0:0: [sdb] Sense Key : Unit Attention [current]
[ +0,000005] sd 12:0:0:0: [sdb] Add. Sense: Not ready to ready change, medium
may have changed
[ +0,000005] sd 12:0:0:0: [sdb] CDB: Read(10) 28 00 00 68 53 76 00 00 02 00
[ +0,000003] blk_update_request: I/O error, dev sdb, sector 6837110
[ +0,000007] Buffer I/O error on dev sdb1, logical block 3418428, async page
read
I tried a fsck.vfat, but that didn't help. Ejecting and unmounting, I
was able to copy one file, but not the rest (tried a couple times, just
got the same errors).
This computer only has USB3 ports. So I tried another computer (running
Xubuntu 14.04) that had a non-USB3-port, and there the copy worked just
fine.
On connecting, dmesg says:
[nov.29 20:56] usb 2-3: new SuperSpeed USB device number 12 using xhci_hcd
[ +0,018698] usb 2-3: New USB device found, idVendor=05dc, idProduct=ba02
[ +0,000008] usb 2-3: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ +0,000005] usb 2-3: Product: WorkflowCFR1
[ +0,000003] usb 2-3: Manufacturer: Lexar
[ +0,000004] usb 2-3: SerialNumber: 000000005018
[ +0,002362] usb-storage 2-3:1.0: USB Mass Storage device detected
[ +0,000135] scsi host14: usb-storage 2-3:1.0
[ +1,000955] scsi 14:0:0:0: Direct-Access Lexar WorkflowCFR1 0822
PQ: 0 ANSI: 6
[ +0,000297] sd 14:0:0:0: Attached scsi generic sg1 type 0
[ +1,104094] sd 14:0:0:0: [sdb] 62537328 512-byte logical blocks: (32.0
GB/29.8 GiB)
[ +0,000598] sd 14:0:0:0: [sdb] Write Protect is off
[ +0,000009] sd 14:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ +0,000646] sd 14:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ +0,004239] sdb: sdb1
[ +0,001969] sd 14:0:0:0: [sdb] Attached SCSI removable disk
ProblemType: Bug
DistroRelease: Ubuntu 15.10
Package: linux-image-4.2.0-18-generic 4.2.0-18.22
ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
Uname: Linux 4.2.0-18-generic x86_64
ApportVersion: 2.19.1-0ubuntu5
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: kiwibird 1912 F.... pulseaudio
/dev/snd/controlC1: kiwibird 1912 F.... pulseaudio
CurrentDesktop: XFCE
Date: Sun Nov 29 20:52:51 2015
HibernationDevice: RESUME=UUID=dc4226ca-3ebe-4611-95ac-c1a0ccbb7d7a
InstallationDate: Installed on 2015-06-04 (178 days ago)
InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1)
MachineType: LENOVO F0AM
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic.efi.signed
root=UUID=91533e8a-b5ca-4447-8c4a-b5bb2d095238 ro noprompt persistent
RelatedPackageVersions:
linux-restricted-modules-4.2.0-18-generic N/A
linux-backports-modules-4.2.0-18-generic N/A
linux-firmware 1.149.2
RfKill:
SourcePackage: linux
UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
UpgradeStatus: Upgraded to wily on 2015-10-24 (35 days ago)
dmi.bios.date: 09/30/2014
dmi.bios.vendor: LENOVO
dmi.bios.version: O00KT19AUS
dmi.board.name: INVALID
dmi.board.vendor: LENOVO
dmi.board.version: 31900058 STD
dmi.chassis.type: 13
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Chassis Version
dmi.modalias:
dmi:bvnLENOVO:bvrO00KT19AUS:bd09/30/2014:svnLENOVO:pnF0AM:pvrLenovoA740:rvnLENOVO:rnINVALID:rvr31900058STD:cvnLENOVO:ct13:cvrChassisVersion:
dmi.product.name: F0AM
dmi.product.version: Lenovo A740
dmi.sys.vendor: LENOVO
** Affects: linux (Ubuntu)
Importance: Undecided
Status: Confirmed
** Tags: amd64 apport-bug wily
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1520988
Title:
Copy of large files from USB3 card reader fails mid-way
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1520988/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
