Thanks for the reply.

I'll try to address your questions one by one as follows:


1. I agree on this point, which is why I decided not to try setting up a 
Machine Owner Key (MOK) to bypass Secure Boot. Since the it87 module only reads 
sensor values and does not actively control the fan curves, getting it to load 
would not resolve the EC-failsafe issue anyway.

2. The rollback from kernel 7.0.0-42 to the previous 7.0.0-38 was done
specifically because the fan issue started right after installing
7.0.0-42, and it was suggested as a diagnostic step to isolate the cause
by AI. No other kernel versions were tested, the reason being, that the
issue started shortly after the latest kernel update and version
mentioned above. As a first-time Linux user, I am obviously not
qualified to provide a low-level tech explanation of why the kernel or
OS suddenly triggers this behavior. That is the exact reason why I filed
this bug report, expecting that answer coming from the developers and
experts in the community and to explain any potential causes which might
be the culprit if not the updated kernel. Since rolling back the kernel
did not fix the bug, other potential reasons could possibly be related
to other system updates (such as systemd, linux-firmware, ACPI tables,
or power-profiles-daemon) or the Embedded Controller getting stuck in a
bad state that even a BIOS flash did not clear.

3. As mentioned earlier, this exact motherboard and hardware setup ran
completely fine without a single issue for over half a year since April
2026. If it is not a communication or compatibility issue between the
Super I/O / EC chips, the OS, and the BIOS, what else could possibly
explain why this erratic 100% fan behavior suddenly started happening
repeatedly after 30 minutes of runtime?

4. I refer back to my previous comment regarding the priority and
urgency of addressing a bug that renders a system practically unusable.
If an open-source OS cannot function reliably across all required
hardware levels, I will have no choice but to return to Windows -
provided that my upcoming test with Windows 11 confirms that the issue
is isolated to Linux Mint and not an actual hardware defect.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2173636

Title:
  ITE Super I/O chip (IDs 0x8696 / 0x8883) unsupported on Gigabyte X870
  AORUS ELITE WIFI7, causing sensor read-out failures and erratic
  maximum fan speed behavior

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2173636/+subscriptions


-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to