I forgot, build output will be here: $ cd $OUT
On Tue, Mar 18, 2014 at 1:27 AM, David Peter <maildavidpe...@gmail.com>wrote: > Hi > > I just did it from scratch. You'll find all my commands preceded by the > link where I found the info (except maybe the croot command which I found > on the CM wiki, This command is in the package of envsetup.sh). > > I did not do the extract-file.sh as I do not have a N4, and it will fail > the build otherwise. > > Good point about the JDK, it's just due to the Android part. Hopefully it > won't last long. > > Maybe my method is old school. Or you could remark that the manifest get > some prebuilt package, but where do they comefrom? I don't know... So I > found yesterday response from F69M to the post "Porting Guide" very > intereting and I should give attention to it. > > > Here is my method, and this is all I know on this subject, good luck: > > https://wiki.ubuntu.com/Touch/Building > > $ sudo apt-get install git gnupg flex bison gperf build-essential \ > > zip bzr curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \ > > libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \ > > libgl1-mesa-dev g++-multilib mingw32 tofrodos \ > > python-markdown libxml2-utils xsltproc zlib1g-dev:i386 schedtool > > $ sudo apt-get install openjdk-6-jdk > > > https://wiki.ubuntu.com/Touch/Install#Step_1_-_Desktop_Setup > > $ sudo add-apt-repository ppa:phablet-team/tools > > $ sudo apt-get update > > $ sudo apt-get install ubuntu-device-flash > > > http://source.android.com/source/initializing.html#ccache > > $ export USE_CCACHE=1 > > > http://source.android.com/source/downloading.html#installing-repo > > $ mkdir ~/bin > > $ PATH=~/bin:$PATH > > $ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > > ~/bin/repo > > $ chmod a+x ~/bin/repo > > $ git config --global user.email "y...@example.com" > > $ git config --global user.name "Your Name" > > > https://wiki.ubuntu.com/Touch/AndroidDevel > > $ mkdir -p /path/to/phablet; cd /path/to/phablet > > $ repo init -u git://phablet.ubuntu.com/CyanogenMod/android.git -b > phablet-trusty > > $ repo sync -j 8 > > > https://wiki.ubuntu.com/Touch/Porting & > https://wiki.ubuntu.com/Touch/Building > > $ . build/envsetup.sh > > $ breakfast [codename] > > $ repo sync > > *$ adb devices* > > *<your device appears here>* > > *$ cd device/[manufacturer]/[codename]* > > *$ ./extract-files.sh* > > $ croot > > $ brunch [codename] > > > > > > On Mon, Mar 17, 2014 at 10:53 AM, Mathias Bauer <mathias_ba...@gmx.net>wrote: > >> Hi David, >> >> After getting the repositories as described in >> https://wiki.ubuntu.com/Touch/AndroidDevel (saucy replaced by trusty) I >> still have no folder called devices/lge/mako. Basically it looks the same >> as after calling "phable-dev-bootstrap". >> >> Calling "breakfast mako" then complains that it can't find device mako >> and fetches a device repository from phablet.ubuntu.com. After that I >> have a folder device/lge/mako. But breakfast at the end still is >> complaining that it does not have a product spec "cm_mako." >> >> Calling "breakfast mako" again yields the same error "device mako not >> found", it again tries to fetch the device repository, but detects that it >> already has one. Nevertheless, is still misses the spec "cm_mako". >> >> "breakfast" also complains about missing jdk6. I thought that no Java >> bits are needed to build Ubuntu Touch (as the build instructions tell), so >> I'm again a bit confused - now I don't know if "breakfast" did all what it >> needed to do before the next can be started. >> >> At least cm_mako obviously is needed for the build, so it can't go on >> here. >> >> Any help would be very welcome. >> >> Regards, >> Mathias >> >> Am 13.03.14 23:24, schrieb David Peter: >> >>> You're right, I had couple of trouble here too. >>> In fact there is a clue in the Ubuntu porting guide: >>> " You can check out the source code using the repo and git tools already >>> familiar to Android ROM developers, as described here >>> >>> https <https://wiki.ubuntu.com/Touch/AndroidDevel>:// >>> <https://wiki.ubuntu.com/Touch/AndroidDevel>wiki.ubuntu.com >>> <https://wiki.ubuntu.com/Touch/AndroidDevel>/Touch/ >>> <https://wiki.ubuntu.com/Touch/AndroidDevel>AndroidDevel >>> >>> <https://wiki.ubuntu.com/Touch/AndroidDevel> >>> " >>> Go to this link and follow the direct checkout section. Replace saucy >>> repo with trusty. >>> >>> Once done proceed like the CM guide, it should be steps like (I don't >>> remember exactly): >>> source ./build/setenv... >>> breakfast mako >>> extract binaries >>> brunch mako >>> >>> Good luck >>> >>> On Mar 13, 2014 8:22 AM, "Mathias Bauer" <mathias_ba...@gmx.net >>> <mailto:mathias_ba...@gmx.net>> wrote: >>> >>> Hi David, >>> >>> please correct me if I'm wrong, this surely helps to understand the >>> build process better, but it does not give me the sources to build >>> Ubuntu Touch. As I understood, the phablet-dev-bootstrap tool is >>> meant to provide a source tree that is based on the CyanogenMod >>> sources, but reduced by everything not needed for Ubuntu Touch >>> (Dalvik etc.), extended by stuff that OTOH Ubuntu Touch needs. >>> >>> So if I follow the CM instructions, I need a further step that turns >>> the CM source tree into an Ubuntu Touch source tree. >>> >>> Regards, >>> Mathias >>> >>> Am 12.03.14 21:24, schrieb David Peter: >>> >>> Sergio is right follow the CyanogenMod's way, here it is: >>> http://wiki.cyanogenmod.org/w/__Build_for_mako >>> >>> <http://wiki.cyanogenmod.org/w/Build_for_mako> >>> >>> Read it, do it, everything will become very clear >>> >>> >>> On Wed, Mar 12, 2014 at 12:17 PM, Sergio Schvezov >>> <sergio.schve...@canonical.com >>> <mailto:sergio.schve...@canonical.com> >>> <mailto:sergio.schvezov@__canonical.com >>> >>> <mailto:sergio.schve...@canonical.com>>> >>> wrote: >>> >>> On Wed, Mar 12, 2014 at 12:30 PM, Mathias Bauer >>> <mathias_ba...@gmx.net <mailto:mathias_ba...@gmx.net> >>> <mailto:mathias_ba...@gmx.net <mailto:mathias_ba...@gmx.net>>__> >>> >>> wrote: >>> > Hi, >>> > >>> > I want to build a Ubuntu Touch for Nexus 4 by myself as >>> an >>> exercise to start >>> > into the world of Ubuntu Touch porting. >>> > >>> > I tried to follow the instructions found here: >>> > >>> > https://wiki.ubuntu.com/Touch/__Building >>> >>> <https://wiki.ubuntu.com/Touch/Building> >>> > >>> > So I got the code by calling >>> > >>> > phablet-dev-bootstrap [target_directory] >>> >>> Can you add '--sources aosp' to that? >>> >>> > After that step the instructions let me think that there >>> should >>> be a file >>> > >>> > [target_directory]/device/lge/__mako/extract_files.sh >>> >>> > >>> > But there isn't even a "mako" under device/lge directory. >>> > >>> > Maybe I misunderstood the instructions, so I would be >>> glad to get an >>> > expanation. >>> >>> No misunderstanding; it just hasn't been updated; That part >>> of the >>> instructions is outdated (follos CyanogenMod's way of doing >>> things). >>> >>> You basically need to follow >>> http://source.android.com/__source/building-devices.html#_ >>> _obtaining-proprietary-binaries >>> >>> <http://source.android.com/source/building-devices.html# >>> obtaining-proprietary-binaries> >>> >>> Thanks for the hint; I'll update the wiki. >>> >>> -- >>> Mailing list: https://launchpad.net/~ubuntu-__phone >>> <https://launchpad.net/~ubuntu-phone> >>> Post to : ubuntu-phone@lists.launchpad.__net >>> <mailto:ubuntu-phone@lists.launchpad.net> >>> <mailto:ubuntu-phone@lists.__launchpad.net >>> <mailto:ubuntu-phone@lists.launchpad.net>> >>> Unsubscribe : https://launchpad.net/~ubuntu-__phone >>> <https://launchpad.net/~ubuntu-phone> >>> More help : https://help.launchpad.net/__ListHelp >>> <https://help.launchpad.net/ListHelp> >>> >>> >>> >>> >>> >>> -- >>> Mailing list: https://launchpad.net/~ubuntu-__phone >>> <https://launchpad.net/~ubuntu-phone> >>> Post to : ubuntu-phone@lists.launchpad.__net >>> <mailto:ubuntu-phone@lists.launchpad.net> >>> Unsubscribe : https://launchpad.net/~ubuntu-__phone >>> <https://launchpad.net/~ubuntu-phone> >>> More help : https://help.launchpad.net/__ListHelp >>> <https://help.launchpad.net/ListHelp> >>> >>> >>> >>> >
-- Mailing list: https://launchpad.net/~ubuntu-phone Post to : ubuntu-phone@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-phone More help : https://help.launchpad.net/ListHelp
