Недавно постаил на сервер ubuntu 7.1- server потихоньку с ней работал начал проверять smart
sudo smartctl -a /dev/hda smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar family Device Model: WDC WD600BB-00CAA1 Serial Number: WD-WMA8E7857660 Firmware Version: 17.07W17 User Capacity: 60 022 480 896 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Feb 6 09:59:53 2008 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (2340) seconds. Offline data collection capabilities: (0x3b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 43) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 001 051 Pre-fail Always In_the_past 0 3 Spin_Up_Time 0x0007 100 094 021 Pre-fail Always - 4058 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 372 5 Reallocated_Sector_Ct 0x0033 180 180 140 Pre-fail Always - 316 7 Seek_Error_Rate 0x000b 100 253 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 050 050 000 Old_age Always - 36921 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 220 196 Reallocated_Event_Count 0x0032 159 159 000 Old_age Always - 41 197 Current_Pending_Sector 0x0012 189 186 000 Old_age Always - 108 198 Offline_Uncorrectable 0x0012 189 188 000 Old_age Always - 108 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 65 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 5945 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5945 occurred at disk power-on lifetime: 1020 hours (42 days + 12 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 10 63 0c 39 e2 Error: UNC at LBA = 0x02390c63 = 37293155 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 10 5f 0c 39 e2 00 11:01:39.800 READ VERIFY SECTOR(S) 40 00 10 4f 0c 39 e2 00 11:01:39.800 READ VERIFY SECTOR(S) 40 00 20 2f 12 39 e2 00 11:01:39.750 READ VERIFY SECTOR(S) 40 00 20 0f 12 39 e2 00 11:01:36.900 READ VERIFY SECTOR(S) 40 00 20 2f 0f 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S) Error 5944 occurred at disk power-on lifetime: 1020 hours (42 days + 12 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 20 15 12 39 e2 Error: UNC at LBA = 0x02391215 = 37294613 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 20 0f 12 39 e2 00 11:01:36.900 READ VERIFY SECTOR(S) 40 00 20 2f 0f 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S) 40 00 20 0f 0f 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S) 40 00 20 6f 0c 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S) 40 00 20 4f 0c 39 e2 00 11:01:31.500 READ VERIFY SECTOR(S) Error 5943 occurred at disk power-on lifetime: 1020 hours (42 days + 12 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 20 3c 0f 39 e2 Error: UNC at LBA = 0x02390f3c = 37293884 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 20 2f 0f 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S) 40 00 20 0f 0f 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S) 40 00 20 6f 0c 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S) 40 00 20 4f 0c 39 e2 00 11:01:31.500 READ VERIFY SECTOR(S) 40 00 40 4f 12 39 e2 00 11:01:31.500 READ VERIFY SECTOR(S) Error 5942 occurred at disk power-on lifetime: 1020 hours (42 days + 12 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 20 63 0c 39 e2 Error: UNC at LBA = 0x02390c63 = 37293155 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 20 4f 0c 39 e2 00 11:01:31.500 READ VERIFY SECTOR(S) 40 00 40 4f 12 39 e2 00 11:01:31.500 READ VERIFY SECTOR(S) 40 00 40 0f 12 39 e2 00 11:01:28.950 READ VERIFY SECTOR(S) 40 00 40 4f 0f 39 e2 00 11:01:28.950 READ VERIFY SECTOR(S) 40 00 40 0f 0f 39 e2 00 11:01:26.300 READ VERIFY SECTOR(S) Error 5941 occurred at disk power-on lifetime: 1020 hours (42 days + 12 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 40 15 12 39 e2 Error: UNC at LBA = 0x02391215 = 37294613 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 40 0f 12 39 e2 00 11:01:28.950 READ VERIFY SECTOR(S) 40 00 40 4f 0f 39 e2 00 11:01:28.950 READ VERIFY SECTOR(S) 40 00 40 0f 0f 39 e2 00 11:01:26.300 READ VERIFY SECTOR(S) 40 00 40 4f 0c 39 e2 00 11:01:23.650 READ VERIFY SECTOR(S) 40 00 40 0f 0c 39 e2 00 11:01:23.650 READ VERIFY SECTOR(S) SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Вывелись ошибки - посоветуйте что они значат -- С уважением Сергей
-- ubuntu-ru mailing list ubuntu-ru@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru