Hi Nikita,

Nikita Tabatsky wrote:
I have the same problem on the ixp425 board with intel strata flash and at present it is not solved
After write to the mtd-block(jffs2) the device cannot be rebooted.
Even hardware reset does not help, only power off..

Yep, that sounds exactly like your mtd driver does not
have a reboot notifier that puts the flash back into
read mode before rebooting.

What map driver do you use?
(And what kernel version too?)

Regards
Greg



On 6/5/07, *Greg Ungerer* <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote:

    Hi Zeinab,

    Zeinab Zeinalpour wrote:
     > I'm working on ADI Coyote network board using snapgear 3.4.0.
     > When we reboot the board with using reboot command, the board
    reboot but
     > its redboot isn't load. We chack ParityENAccCodelet for find a
    safe code
     > for reboot, but it just work on ixp46x. Did anyone has the same
    problem
     > befor?

    Do you use the MTD flash driver on that board?
    Maybe it doesn't put the flash back into read mode on reboot.

    Regards
    Greg



    ------------------------------------------------------------------------
Greg Ungerer -- Chief Software Dude EMAIL: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
    Secure Computing Corporation                PHONE:       +61 7 3435 2888
    825 Stanley St,                             FAX:         +61 7 3891 3630
    Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com
    _______________________________________________
    uClinux-dev mailing list
    uClinux-dev@uclinux.org <mailto:uClinux-dev@uclinux.org>
    http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
    This message was resent by uclinux-dev@uclinux.org
    <mailto:uclinux-dev@uclinux.org>
    To unsubscribe see:
    http://mailman.uclinux.org/mailman/options/uclinux-dev



------------------------------------------------------------------------

_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev


--
------------------------------------------------------------------------
Greg Ungerer  --  Chief Software Dude       EMAIL:     [EMAIL PROTECTED]
SnapGear -- a Secure Computing Company      PHONE:       +61 7 3435 2888
825 Stanley St,                             FAX:         +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev

Reply via email to