Hi Philippe,
Philippe De Muyter wrote:
Defines look good. Probably no point having a separate header
file for these, given the only use is in intc-2.c. I would
suggest putting them directly in intc-2.c
I think that in the long term, we'll need one, e.g. because the profile
timer will want to choose its (high) level+priority.
In the mean time, here is a revised patch.
Looks good, thanks. Applied to the m68knommu git tree.
Regards
Greg
---
The Coldfire MCF547x/MCF548x have the same interrupt controller than
the MCF528x e.g., but only one, not two as in the MCF528x. Modify
intc-2.c to support only one interrupt controller if MCFICM_INTC1 is
not defined.
Signed-off-by: Philippe De Muyter <p...@macqel.be>
diff --git a/arch/m68knommu/platform/coldfire/intc-2.c
b/arch/m68knommu/platform/coldfire/intc-2.c
index a0c72ec..c23046c 100644
--- a/arch/m68knommu/platform/coldfire/intc-2.c
+++ b/arch/m68knommu/platform/coldfire/intc-2.c
@@ -1,9 +1,11 @@
/*
* intc-2.c
*
- * General interrupt controller code for the many ColdFire version 2 cores
- * that use the two region INTC interrupt controller. This includes the
- * 523x family, 5270, 5271, 5274, 5275, and the 528x families.
+ * General interrupt controller code for the many ColdFire cores that use
+ * interrupt controllers with 63 interrupt sources, organized as 56 fully-
+ * programmable + 7 fixed-level interrupt sources. This includes the 523x
+ * family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
+ * controllers, and the 547x and 548x families which have only one of them.
*
* (C) Copyright 2009, Greg Ungerer <g...@snapgear.com>
*
@@ -23,21 +25,37 @@
#include <asm/traps.h>
/*
- * Each vector needs a unique priority and level asscoiated with it.
+ * Bit definitions for the ICR family of registers.
+ */
+#define MCFSIM_ICR_LEVEL(l) ((l)<<3) /* Level l intr */
+#define MCFSIM_ICR_PRI(p) (p) /* Priority p intr */
+
+/*
+ * Each vector needs a unique priority and level associated with it.
* We don't really care so much what they are, we don't rely on the
- * tranditional priority interrupt scheme of the m68k/ColdFire.
+ * traditional priority interrupt scheme of the m68k/ColdFire.
*/
-static u8 intc_intpri = 0x36;
+static u8 intc_intpri = MCFSIM_ICR_LEVEL(6) | MCFSIM_ICR_PRI(6);
+
+#ifdef MCFICM_INTC1
+#define NR_VECS 128
+#else
+#define NR_VECS 64
+#endif
static void intc_irq_mask(unsigned int irq)
{
- if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) {
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + NR_VECS)) {
unsigned long imraddr;
u32 val, imrbit;
irq -= MCFINT_VECBASE;
imraddr = MCF_IPSBAR;
+#ifdef MCFICM_INTC1
imraddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+ imraddr += MCFICM_INTC0;
+#endif
imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL;
imrbit = 0x1 << (irq & 0x1f);
@@ -48,13 +66,17 @@ static void intc_irq_mask(unsigned int irq)
static void intc_irq_unmask(unsigned int irq)
{
- if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) {
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + NR_VECS)) {
unsigned long intaddr, imraddr, icraddr;
u32 val, imrbit;
irq -= MCFINT_VECBASE;
intaddr = MCF_IPSBAR;
+#ifdef MCFICM_INTC1
intaddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+ intaddr += MCFICM_INTC0;
+#endif
imraddr = intaddr + ((irq & 0x20) ? MCFINTC_IMRH :
MCFINTC_IMRL);
icraddr = intaddr + MCFINTC_ICR0 + (irq & 0x3f);
imrbit = 0x1 << (irq & 0x1f);
@@ -85,7 +107,9 @@ void __init init_IRQ(void)
/* Mask all interrupt sources */
__raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+#ifdef MCFICM_INTC1
__raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC1 + MCFINTC_IMRL);
+#endif
for (irq = 0; (irq < NR_IRQS); irq++) {
irq_desc[irq].status = IRQ_DISABLED;
--
------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: g...@snapgear.com
SnapGear Group, McAfee PHONE: +61 7 3435 2888
8 Gardner Close FAX: +61 7 3217 5323
Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
