hi folks
I can't mirror my drive on my new PVM opensolaris guest :(
I tried this and it still messes with me:
pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0s0
cannot attach c7t1d0s0 to c7t0d0s0: new device must be a single disk
pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0
cannot label 'c7t1d0': EFI labeled devices are not supported on root
pools.
pcdog at opensolaris:~# format -e
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c7t0d0 <DEFAULT cyl 1957 alt 0 hd 255 sec 63>
/xpvd/xdf at 51712
1. c7t1d0 <DEFAULT cyl 1957 alt 0 hd 255 sec 63>
/xpvd/xdf at 51728
Specify disk (enter its number): 1
selecting c7t1d0
[disk formatted, no defect list found]
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
show - translate a disk address
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> label
[0] SMI Label
[1] EFI Label
Specify Label type[0]: 0
Ready to label disk, continue? yes
format> show
Enter a disk block: ^C
format> quit
pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0
cannot label 'c7t1d0': EFI labeled devices are not supported on root
pools.
pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0s0
cannot attach c7t1d0s0 to c7t0d0s0: new device must be a single disk
pcdog at opensolaris:~#
----
Silvan Gebhardt,
pcdog at pcdog.ch
+41 32 512 69 58 VOIP CH
+41 52 720 39 88 Analog CH
+41 78 810 39 88 Cell CH
+1 (505) 480-9905 Cell US
+1 (360) 718-3416 Landline US
+ 1 866-941-3869 Toll Free US
+31 85 888 0256 NL
+44 1225 63 7104 UK
