sure - but I need to get it attached first!
lg silvan ---- Silvan Gebhardt, pcdog at pcdog.ch +41 32 512 69 58 VOIP CH +41 52 720 39 88 Analog CH +41 78 810 39 88 Cell CH +1 (505) 480-9905 Cell US +1 (360) 718-3416 Landline US + 1 866-941-3869 Toll Free US +31 85 888 0256 NL +44 1225 63 7104 UK Am 25.09.2009 um 12:00 schrieb Javi: > And don't forget to do the installblock on the mirrored disk, > otherwise you will not be able to boot. ZFS doesn't copy the boot > block. > > On Fri, Sep 25, 2009 at 11:59 AM, Javi <javier.f.conde at gmail.com> > wrote: >> Your partition tables are not identicals! >> >> On Fri, Sep 25, 2009 at 11:54 AM, Silvan M. Gebhardt >> <pcdog at pcdog.ch> wrote: >>> hi folks >>> >>> >>> I can't mirror my drive on my new PVM opensolaris guest :( >>> >>> >>> I tried this and it still messes with me: >>> >>> >>> pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0s0 >>> cannot attach c7t1d0s0 to c7t0d0s0: new device must be a single disk >>> pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0 >>> cannot label 'c7t1d0': EFI labeled devices are not supported on >>> root pools. >>> pcdog at opensolaris:~# format -e >>> Searching for disks...done >>> >>> >>> AVAILABLE DISK SELECTIONS: >>> 0. c7t0d0 <DEFAULT cyl 1957 alt 0 hd 255 sec 63> >>> /xpvd/xdf at 51712 >>> 1. c7t1d0 <DEFAULT cyl 1957 alt 0 hd 255 sec 63> >>> /xpvd/xdf at 51728 >>> Specify disk (enter its number): 1 >>> selecting c7t1d0 >>> [disk formatted, no defect list found] >>> >>> >>> FORMAT MENU: >>> disk - select a disk >>> type - select (define) a disk type >>> partition - select (define) a partition table >>> current - describe the current disk >>> format - format and analyze the disk >>> fdisk - run the fdisk program >>> repair - repair a defective sector >>> show - translate a disk address >>> label - write label to the disk >>> analyze - surface analysis >>> defect - defect list management >>> backup - search for backup labels >>> verify - read and display labels >>> save - save new disk/partition definitions >>> volname - set 8-character volume name >>> !<cmd> - execute <cmd>, then return >>> quit >>> format> label >>> [0] SMI Label >>> [1] EFI Label >>> Specify Label type[0]: 0 >>> Ready to label disk, continue? yes >>> >>> format> show >>> Enter a disk block: ^C >>> format> quit >>> pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0 >>> cannot label 'c7t1d0': EFI labeled devices are not supported on >>> root pools. >>> pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0s0 >>> cannot attach c7t1d0s0 to c7t0d0s0: new device must be a single disk >>> pcdog at opensolaris:~# >>> >>> >>> >>> >>> ---- >>> >>> Silvan Gebhardt, >>> pcdog at pcdog.ch >>> >>> >>> +41 32 512 69 58 VOIP CH >>> +41 52 720 39 88 Analog CH >>> +41 78 810 39 88 Cell CH >>> +1 (505) 480-9905 Cell US >>> +1 (360) 718-3416 Landline US >>> + 1 866-941-3869 Toll Free US >>> +31 85 888 0256 NL >>> +44 1225 63 7104 UK >>> >>> >>> >>> >>> _______________________________________________ >>> ug-chosug mailing list >>> ug-chosug at opensolaris.org >>> http://mail.opensolaris.org/mailman/listinfo/ug-chosug >>> >> > _______________________________________________ > ug-chosug mailing list > ug-chosug at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/ug-chosug
