IIRC...
man boot
on a currentish solaris system should tell you a fair bit.
Failing that, docs.sun.com - http://docs.sun.com/app/docs/coll/216.1?l=en
might help, but I notice it's only up to 3.X
Failing that, without thinking really hard about it, I don't know. ;)
Cheers!
Nathan.
Malcolm Herbert wrote:
> I've had a look on the net for a PROM command reference but most of the
> ones I've found to date are old (2002 or earlier) and or are very basic
> ...
>
> Does anyone have access to a single document that lists all PROM
> commands for current hardware that I could have a look at? For bonus
> points, a single reference for all the RCS/ALOM/ILOM/ELOM commands would
> be wonderful as well ... :)
>
> Failing that - I'm after the PROM magic that allows the specification of
> network parameters on the command line to boot a host when ARP/RARP and
> DHCP are not available, but the catch is I don't want to do WAN boot ...
> I have the JumpStart server set up and have confirmed that it works, I
> just don't have the first stage boot protocols available[1] ...
>
> is this even possible? I've found a reference for performing a WAN boot
> and it seems to allow specification of most of the parameters I want
> except the IPs for the JumpStart TFTP and NFS servers (which aren't
> needed for WAN boot, naturally)
>
> Regards,
> Malcolm
>
> [1] In my testing environment I have DHCP running, which is how I know
> the JumpStart host (actually an xVM Ops Centre proxy) works, however we
> may have the situation that in production we won't have DHCP available
> ... I'm told that xVM Ops Centre v2.1 doesn't support WAN boot which
> leaves us in a hole if we can't use DHCP either ...
>
