Hi, im guessing you lack support for the raid controller in the windows setup. Please checkout Pierre's perl driver script (search-drivers.pl) located in the devel mailinglist.
- Harm On Thu, 2009-01-08 at 21:05 -0700, Travis Zadikem wrote: > After about two weeks I finally got unattended to work great with a > Poweredge R300 which has some really bizarre Broadcom Drivers. So, I > thought that I would start working on our Poweredge 860's (about 50 of > them). Unattended comes up fine via pxe, sees the hard drive and > appears to format and fdisk the whole drive but then it won't come up > on the next boot. It can't even find the hard drive then (non-pxe). > I believe this has some SATA drivers that have to be installed ahead > of time. Anyone? My next thing is to use the disks that come with > Dell to do a basic 2003 install (2003 Standard R2 VL to be exact) and > then right before the first boot to bring it up with a linux rescue > disk and see how dell laid out the drivers (which is how I figured out > how to get the R300 to work). I'd really like to have this one > working by Saturday if, possible or I get to ghost 50 machines > instead. > > thanks. > > ------------------------------------------------------------------------------ > Check out the new SourceForge.net Marketplace. > It is the best place to buy or sell services for > just about anything Open Source. > http://p.sf.net/sfu/Xq1LFB > _______________________________________________ unattended-info mailing list > unattended-info@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/unattended-info ------------------------------------------------------------------------------ Check out the new SourceForge.net Marketplace. It is the best place to buy or sell services for just about anything Open Source. http://p.sf.net/sfu/Xq1LFB _______________________________________________ unattended-info mailing list unattended-info@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/unattended-info
