Hi all,
Got several RPi's with Justboom DAC's dotted around the house feeding either the hifi or powered speakers. All working great - whole house sound system :D I'm in the process of replacing the RPi/DAC/2.1 powered speaker combo in the bedroom with an RPi/IQaudio DigiAMP+/passive speaker combo. Very impressed with the IQaudio DigiAMP+. Good sound and a surprising amount of power. However, the 2.1 speakers have a useful feature - a remote wired volume control and on/off switch. I'm aware of the possibility of using a suitable rotary encoder but while I was digging around on that topic I came across USB volume controls. So I bought this:- https://www.amazon.co.uk/gp/product/B07Z3DH5PV/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 (Other models available.) At the very least I can hack it to use the (smart looking) housing, knob and cable to configure it as a basic rotary encoder. But before I go that route I want to investigate the possibility of using it as-is. I've had a good google around and there are tantalizing hints that it might be possible. Examples:- http://moodeaudio.org/forum/showthread.php?tid=2154 https://nerdhut.de/2018/03/29/arduino-usb-volume-knob/ ... While I'm not adverse to a bit of soldering and hackery this type of device could be a useful solution for a lot of PiCorePlayer users. Any thoughts/suggestions? Cheers, P ------------------------------------------------------------------------ romanempire's Profile: http://forums.slimdevices.com/member.php?userid=67209 View this thread: http://forums.slimdevices.com/showthread.php?t=113605 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix