On Thursday, February 6, 2003, at 12:38 PM, Eric B. Haulenbeek wrote:
> Thanks Will... It looks like I may have other problems with this
> particular
> ZIF. I've tried several different CPU multipliers... 9.0 being the
> highest.,
> and all to no avail. I've also tried them in combination with several
> different system bus speeds... nothing higher than 50.0 MHz and as low
> as
> 43.5 MHz. I simply cannot get this thing to cooperate! As soon as I
> drop
> back to my old G3/266 and set it up to run at 45MHz using a multiplier
> of
> 6.0 everything is fine... what else could be wrong but the G4 ZIF?
>
> Eric
If you have the full chart of jumper settings you could set your G4 to
run at apox the speed of your G3/266 ! This might help test the ram
possible issue. For example you could run the G4 at settings:
1,2,4,6,7,8,10,11
which would give you a bus of 50mhz but a cpu of 275mhz
2,6.7,10 would give you 270mhz but a bus of 45mhz.
Even slower settings could be tried. Both my G3 300 and G3 500 would
run fine at slow speeds but why (other then for testing)when the faster
speeds work so well ;-)
--
Unsupported OS X is sponsored by <http://lowendmac.com/>
Support Low End Mac <http://lowendmac.com/lists/support.html>
Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
