Re: Getting an Apple/ATTO PSC SCSI Card to work with my 7300

[Maxwell Cabral]

Well it seems that I fixed it myself. I flashed it using a Beige G3 
(the original ROM on the ATTO card didn't like my Rage 128 or Radeon 
7000 it seems as it wouldn't boot when either were in use) & it worked. 
In fact I'm using it now. Its much faster.

Thanks anyway,
Maxwell M Cabral

I'm trying to use an Apple/ATTO PSC SCSI card in my 7300. It locks up
before the Happy Mac & doesn't go further. Using the "disable" key
command doesn't work. It still doesn't work when I disconnect my drives
also. I'm connecting my drives to the 50Pin connection. Its using the
original version of the Apple ROM. If I could get into Mac OS 9 I'd
flash it to the newest ATTO version using OS9Forever's flasher. In the
mean time I just need to get it working. It doesn't work in 9 or X. Any
ideas?
-Maxwell M Cabral


--
Unsupported OS X is sponsored by <http://lowendmac.com/>
     Support Low End Mac <http://lowendmac.com/lists/support.html>

Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html>
 --> AOL users, remove "mailto:";
Send list messages to:     <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:     <mailto:[EMAIL PROTECTED]>
For digest mode, email:    <mailto:[EMAIL PROTECTED]>
Subscription questions:    <mailto:[EMAIL PROTECTED]>
Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com