I have installed OS 10.3.3 on my PM 9600/G4/800 with a 22" Apple
Cinema Display and have encountered a strange startup issue. I'm
using XPF 3.0a15 and when I boot the computer the initial display is
ok, but when the OS takes control of the display (right before the
'Starting OS X' progress box is displayed with text entries of each
step being displayed) apparently the wrong resolution or refresh rate
is selected as the display turns itself off and the indicator light
flashes on it. The OS boots fine and I am able to press the power
button, 'R', and return to reboot. Sometimes the initial boot up
selects the correct resolution, sometimes the second or third time it
does. Other than this, 10.3 is very stable and feels somewhat
faster than 10.2. I have checked permissions and verified the disk
(I have 2 OS X partitions and use one to verify the other.) This
happens on both 10.3 partitions I have, one of which I erased the
partition then installed on, one was an update and install from 10.2.
Any suggestions would be appreciated.
--
--
Mr. PopMan - [EMAIL PROTECTED] - "Does anybody want to play a
game of pinball?"
Don't talk about what you have done or what you are going to do - do it and
let it speak for itself." --Martin Vanbee
--
Unsupported OS X is sponsored by <http://lowendmac.com/>
Support Low End Mac <http://lowendmac.com/lists/support.html>
Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
