Jeff Walther <[EMAIL PROTECTED]> wrote:

---Original Message -----
I am looking for answers to my questions below, or
directions to a FAQ or other info source answering
them, or an easier way to accomplish the overall goal.

I have several questions, but I think I'll start with
my overall goal, because I find that sometimes my
detailed questions are a dead end.

I am seriously considering setting up one of these, 
<http://www.bestbuy.com/site/olspage.jsp?skuId=6983561&productCategoryId=pcmcat25300050005&type=product&tab=4&id=1099388685460>
for my house. That is a networked music player--a
soundbridge. It takes music stored on a networked
server and outputs it to a stereo system.  So, in
effect it is a stereo component, which can play music
that is stored in electronic format on one's computer
network.

My audio CD-Player just died a long painful death, so
my choice is to spring for a new CD-player for the
stereo system (one that holds at least six disks) or
get one of these sound bridge devices.  The price on
audio CD players is surprisingly high (when did that
happen?), so the Sound Bridge is an attractive choice.

The catch is in how the digital music must be stored
in order to be accessible to the Sound Bridge.  From
the listed system requirements it sounds like I need
OSX and iTunes.

While I have been subscribed to this list, I've never
actually installed OSX, though I do own copies of
10.0x and the 10.1 upgrade.

1)  So, I think I need to install OSX on a machine in
order to use iTunes. Is that true?  Is it true for
earlier versions?  Of course, the Sound Bridge might
not be able to see iTunes on Classic OS even if iTunes
will run on Classic.

2)  Where do I get iTunes. I have vague memories that
it was a free download when it first came out and then
became a paid-for component, but that is a very hazy
memory.   What is its status, and if it is 
payware now, is the older free version still
available?

2)  Can iTunes be used on our unsupported machines? 
Which versions? 
Where can I find it/them.  I have the choice of a
variety of machines, but my main choices are probably
a
Umax S900 or a Beige G3. I could also do a 7500 or an
8500.  I will use all IDE storage either through an
Acard or through the Beige's built-in busses.

3)  How does one get one's CDs into iTunes?  Is this a
relatively simple proceedure?  Will I need additional
software?  This scheme quickly looses it's
attractiveness if I must spend money on additional
software.

I think some of this stuff was discussed in detail on
PowerWatch when iTunes was first released, but that
was
about 10,000 messages ago, and the search function
shows most recent messages first....

Thank you for humorous or helpful suggestions,
-----End Original Message-------------

Maybe the best I can do is to give an example of my
set up.

It started out as a 7500/200 604e hooked into my
1980's vintage Yamaha stereo system via the RCA audio
input/output jacks.

I connected the 7500 to the stereo receiver which amps
the speakers and other components like the tape deck,
phonograph turn table and the CD (also broken). I then
uses CD-ROM drive on the 7500 as a replacement for the
stereo CD.

Using iTunes 2.0.4 available at:
http://docs.info.apple.com/article.html?artnum=120073

I connect to an mp3 server via 10baseT Ethernet
(wired). The server is an SE/30 (only 100 watts) using
a hacked version of OS 8.1

This network is not busy only two people on it and we
usually are listening to the stereo at the same time.
It works for us.

If you go to OS X. You will get a much better version 
 of iTunes have access to the iTunes store and mostly
likely have faster networking.

With any version of iTunes you can convert your CD's
to mp3's and add them to the library. If you have
tapes/LPs's a tape deck and turn table with the proper
freeware/shareware you can also convert them to mp3's
and add them to you iTunes library. And if your stereo
receiver can't pick up any good radio stations, iTunes
Radio Tuner can.

We have three Macs using iTunes: 1) living room
stereo, 2) the front room Mac 6100 G3/300 with great
Altec Lansing ACS 48 speakers (on par with the Yamaha
sound) and the downstairs business Mac B&W with cheapo
speakers.

Not sure why you would need the Bestbuy networked
music player.

Oh, one last note, I needed to use the above mentioned
7500 for another use. It was replaced with a 6100
G3/266. I just needed a mini-stereo to RCA jack
adapter for the stereo patch cords. It works as good
as the 7500.

--glen (digest mode)

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

-- 
Unsupported OS X is sponsored by <http://lowendmac.com/>

      Support Low End Mac <http://lowendmac.com/lists/support.html>

Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html>
  --> AOL users, remove "mailto:";
Send list messages to:     <mailto:[email protected]>
To unsubscribe, email:     <mailto:[EMAIL PROTECTED]>
For digest mode, email:    <mailto:[EMAIL PROTECTED]>
Subscription questions:    <mailto:[EMAIL PROTECTED]>
Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/>

iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com

Reply via email to