Hello, I think you are misusing Test Fragments. Test Fragment should be in INCLUDED Test Plan not INCLUDER.
So in your case they should be Login.jmx and Timer.jmx. While according to what you show and to log file they are in INCLUDED Test Plan. I think this is what changes mentions: - The correct way to include Test Elements is to use *Test Fragment *as stated in documentation of *Include Controller *. - The include controller is designed to use an external jmx file. To use it, create a Test Fragment underneath the Test Plan and add any desired samplers, controllers etc. below it. Then save the Test Plan. => The file is now ready to be included as part of other Test Plans.<= Regards On Tue, Oct 22, 2013 at 4:13 AM, Robin D. Wilson <rwils...@gmail.com> wrote: > That is exactly what I'm using (Test Fragments)... > > -- > Robin D. Wilson > VOICE: 512-777-1861 > > > > On Oct 21, 2013, at 6:49 PM, UBIK LOAD PACK Support < > supp...@ubikloadpack.com> wrote: > > Hello, > Incompatible changes explains your issue: > > - jmeter.apache.org/changes.html > > - In previous versions, *IncludeController *could run Test Elements > located inside a *Thread Group *, this behaviour ( *which was not > documented *) ould result in weird behaviour, it has been removed in > this version (see Bug > 55464<https://issues.apache.org/bugzilla/show_bug.cgi?id=55464> ). > The correct way to include Test Elements is to use *Test Fragment *as > stated in documentation of *Include Controller *. > > > Regards > @ubikloadpack > > > On Tuesday, October 22, 2013, Robin D. Wilson wrote: > > > > I have a test that includes some test fragments using an 'Include > > Controller', and then those test frags are used throughout the > > thread groups by being added in a 'Module Controller'. When I load my > > test, I get these messages in the log: > > > > --------------------------------------- > > > > 2013/10/21 18:20:33 INFO - jmeter.gui.action.Load: Loading file: > > X:\Tests\JMeter\WizardHome\TestSuites\Stress Test\W101 Login > > Stress Generator_wTestFrag.jmx > > 2013/10/21 18:20:33 INFO - jmeter.services.FileServer: Set new > > base='X:\Tests\JMeter\WizardHome\TestSuites\Stress Test' > > 2013/10/21 18:20:34 INFO - jmeter.services.FileServer: Set new > > base='X:\Tests\JMeter\WizardHome\TestSuites\Stress Test' > > 2013/10/21 18:20:34 INFO - jmeter.control.IncludeController: > > loadIncludedElements -- try to load included module: > > X:\Tests\JMeter\WizardHome\TestSuites\Functional Units\Login.jmx > > 2013/10/21 18:20:34 WARN - jmeter.control.IncludeController: No Test > > Fragment was found in included Test Plan, returning empty > > HashTree > > 2013/10/21 18:20:34 INFO - jmeter.control.IncludeController: > > loadIncludedElements -- try to load included module: > > X:\Tests\JMeter\WizardHome\TestSuites\Functional Units\Utility\Timer.jmx > > 2013/10/21 18:20:34 WARN - jmeter.control.IncludeController: No Test > > Fragment was found in included Test Plan, returning empty > > HashTree > > 2013/10/21 18:20:34 INFO - jmeter.control.IncludeController: > > loadIncludedElements -- try to load included module: > > X:\Tests\JMeter\WizardHome\TestSuites\Functional Units\Login.jmx > > 2013/10/21 18:20:34 WARN - jmeter.control.IncludeController: No Test > > Fragment was found in included Test Plan, returning empty > > HashTree > > 2013/10/21 18:20:34 INFO - jmeter.control.IncludeController: > > loadIncludedElements -- try to load included module: > > X:\Tests\JMeter\WizardHome\TestSuites\Functional Units\Utility\Timer.jmx > > 2013/10/21 18:20:34 WARN - jmeter.control.IncludeController: No Test > > Fragment was found in included Test Plan, returning empty > > HashTree > > > > > > -------------------------------------- > > > > NOTE: The repeat of the INFO+WARN messages about trying to load the > > IncludeController is puzzling, since there are only 2 Include > > Controllers in the test plan... Not sure why it appears to be trying to > > load each of them twice. > > > > This same test works perfectly on JMeter 2.9 (and earlier). > > > > FYI, the test looks like this: > > > > Test Plan > > Setup stuff (User Defined Vars, Requests Defaults, Cookie > > Manager, etc.) > > > > "Includes" Test Fragment > > Include Controller - Login.jmx > > Include Controller - Timer.jmx > > > > "Timer Start" Thread Group > > User Parameters - "Timer Start" > > Module Controller - "Timer" (from "Includes/Timer" > > module above) > > > > "Login" Thread Group > > User Parameters - "Login" > > Module Controller - "Login" (from "Includes/Login" > > module above) > > > > "Timer End" Thread Group > > User Parameters - "Timer End" > > Module Controller - "Timer" (from "Includes/Timer" > > module above) > > Tree Listener (only shows 'errors') > > Summary Report Listener > > > > Near as I can tell, each thread group runs - for as many threads as I > > expect - but nothing happens within the thread group (e.g., > > none of the 'Module Controllers' actually do anything). > > > > BTW, if I "merge" the two "Included" test fragments - into the "Includes" > > Test Fragment - and re-configure my module controllers to > > point to the merged stuff, it works. So it appears to be a problem with > > the Include Controller not actually loading my stuff. > > > > I have noted a significant performance boost on this new version of > > JMeter, but I can't use it if I can't get the Include Controller > > to work... So any help would be very appreciated. > > > > -- > > Robin D. Wilson > > Sr. Director of Web Development > > KingsIsle Entertainment, Inc. > > VOICE: 512-777-1861 > > http://www.kingsisle.com > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: user-unsubscr...@jmeter.apache.org<javascript:;> > > For additional commands, e-mail: user-h...@jmeter.apache.org > <javascript:;> > > > > > > -- > > Regards > Ubik Load Pack <http://ubikloadpack.com> Team > Follow us on Twitter <http://twitter.com/ubikloadpack> > > > Cordialement > L'équipe Ubik Load Pack <http://ubikloadpack.com> > Suivez-nous sur Twitter <http://twitter.com/ubikloadpack> > > --------------------------------------------------------------------- > To unsubscribe, e-mail: user-unsubscr...@jmeter.apache.org > For additional commands, e-mail: user-h...@jmeter.apache.org > > -- Regards Ubik Load Pack <http://ubikloadpack.com> Team Follow us on Twitter <http://twitter.com/ubikloadpack> Cordialement L'équipe Ubik Load Pack <http://ubikloadpack.com> Suivez-nous sur Twitter <http://twitter.com/ubikloadpack>
