It figures... That works. Now I'll have to go through all my "Includes" and change them from simple controllers to "Test Fragments".
Is this documented somewhere - clearly? I read through the Test Fragment stuff, and it was as clear as muddy water... -- Robin D. Wilson Sr. Director of Web Development KingsIsle Entertainment, Inc. VOICE: 512-777-1861 http://www.kingsisle.com -----Original Message----- From: Nicola Ambrosetti Brolin [mailto:ambrosetti.nic...@gmail.com] Sent: Tuesday, October 22, 2013 8:40 AM To: JMeter Users List Subject: Re: JMeter 2.10 Include Controller doesn't seem to be working The test fragment must be inside the included file, for the include controller will ignore any test element not placed under a test fragment. You can however have a test fragment as parent of the include controller, which includes a file containing another test fragment. I use this setup for example to be able to point to the include controller from a module controller in the thread group. To summarize this is the way to do it: Included file: Test Plan |--Test fragment |-- sampler 1 |-- sampler 2 Test project: Test Plan |--Test fragment | |-- Include controller (pointing to included file above) |-- Thread group |-- Sampler 3 |-- Module controller (pointing to Test Fragment > Include controller) |-- Sampler 4 This will be run as: Sampler 3 sampler 1 sampler 2 Sampler 4 On 22 October 2013 14:49, Robin D. Wilson <rwils...@gmail.com> wrote: > So let me understand, do I need to put the "Test Fragment" inside the > included file, or do I put the Include Controller inside a Test Fragment? > > -- > Robin D. Wilson > VOICE: 512-777-1861 > > > > On Oct 22, 2013, at 6:52 AM, Nicola Ambrosetti Brolin < > ambrosetti.nic...@gmail.com> wrote: > > I might add (since I was the reporter of bug 55464) that it is > confusing that when using "Save selection as" the produced jmx project > has the selected steps sitting right under the test plan, instead of > being under a test fragment. Thus one could be led to believe that the > saved selection could be included as is. However this is not the case: > the include controller will completely ignore anything in the included > project that is not child of a test fragment. > > Cheers, > > Nicola > > > On 22 October 2013 10:58, UBIK LOAD PACK Support > <supp...@ubikloadpack.com>wrote: > > > Hello, > > I think you are misusing Test Fragments. > > > > Test Fragment should be in INCLUDED Test Plan not INCLUDER. > > > > So in your case they should be Login.jmx and Timer.jmx. > > While according to what you show and to log file they are in > > INCLUDED > Test > > Plan. > > > > I think this is what changes mentions: > > > > - The correct way to include Test Elements is to use *Test Fragment *as > > stated in documentation of *Include Controller *. > > - The include controller is designed to use an external jmx file. > > To > use > > it, create a Test Fragment underneath the Test Plan and add any desired > > samplers, controllers etc. below it. Then save the Test Plan. => > > The file > > is now ready to be included as part of other Test Plans.<= > > > > > > Regards > > > > > > On Tue, Oct 22, 2013 at 4:13 AM, Robin D. Wilson > > <rwils...@gmail.com> > > wrote: > > > >> That is exactly what I'm using (Test Fragments)... > >> > >> -- > >> Robin D. Wilson > >> VOICE: 512-777-1861 > >> > >> > >> > >> On Oct 21, 2013, at 6:49 PM, UBIK LOAD PACK Support < > >> supp...@ubikloadpack.com> wrote: > >> > >> Hello, > >> Incompatible changes explains your issue: > >> > >> - jmeter.apache.org/changes.html > >> > >> - In previous versions, *IncludeController *could run Test > >> Elements located inside a *Thread Group *, this behaviour ( *which > >> was not documented *) ould result in weird behaviour, it has been > >> removed in this version (see Bug > >> 55464<https://issues.apache.org/bugzilla/show_bug.cgi?id=55464> ). > >> The correct way to include Test Elements is to use *Test Fragment > >> *as stated in documentation of *Include Controller *. > >> > >> > >> Regards > >> @ubikloadpack > >> > >>> On Tuesday, October 22, 2013, Robin D. Wilson wrote: > >>> > >>> I have a test that includes some test fragments using an 'Include > >>> Controller', and then those test frags are used throughout the > >>> thread groups by being added in a 'Module Controller'. When I load > >>> my test, I get these messages in the log: > >>> > >>> --------------------------------------- > >>> > >>> 2013/10/21 18:20:33 INFO - jmeter.gui.action.Load: Loading file: > >>> X:\Tests\JMeter\WizardHome\TestSuites\Stress Test\W101 Login > >>> Stress Generator_wTestFrag.jmx > >>> 2013/10/21 18:20:33 INFO - jmeter.services.FileServer: Set new > >>> base='X:\Tests\JMeter\WizardHome\TestSuites\Stress Test' > >>> 2013/10/21 18:20:34 INFO - jmeter.services.FileServer: Set new > >>> base='X:\Tests\JMeter\WizardHome\TestSuites\Stress Test' > >>> 2013/10/21 18:20:34 INFO - jmeter.control.IncludeController: > >>> loadIncludedElements -- try to load included module: > >>> X:\Tests\JMeter\WizardHome\TestSuites\Functional Units\Login.jmx > >>> 2013/10/21 18:20:34 WARN - jmeter.control.IncludeController: No > >>> Test Fragment was found in included Test Plan, returning empty > >>> HashTree > >>> 2013/10/21 18:20:34 INFO - jmeter.control.IncludeController: > >>> loadIncludedElements -- try to load included module: > >>> X:\Tests\JMeter\WizardHome\TestSuites\Functional > > Units\Utility\Timer.jmx > >>> 2013/10/21 18:20:34 WARN - jmeter.control.IncludeController: No > >>> Test Fragment was found in included Test Plan, returning empty > >>> HashTree > >>> 2013/10/21 18:20:34 INFO - jmeter.control.IncludeController: > >>> loadIncludedElements -- try to load included module: > >>> X:\Tests\JMeter\WizardHome\TestSuites\Functional Units\Login.jmx > >>> 2013/10/21 18:20:34 WARN - jmeter.control.IncludeController: No > >>> Test Fragment was found in included Test Plan, returning empty > >>> HashTree > >>> 2013/10/21 18:20:34 INFO - jmeter.control.IncludeController: > >>> loadIncludedElements -- try to load included module: > >>> X:\Tests\JMeter\WizardHome\TestSuites\Functional > > Units\Utility\Timer.jmx > >>> 2013/10/21 18:20:34 WARN - jmeter.control.IncludeController: No > >>> Test Fragment was found in included Test Plan, returning empty > >>> HashTree > >>> > >>> > >>> -------------------------------------- > >>> > >>> NOTE: The repeat of the INFO+WARN messages about trying to load > >>> the IncludeController is puzzling, since there are only 2 Include > >>> Controllers in the test plan... Not sure why it appears to be > >>> trying to load each of them twice. > >>> > >>> This same test works perfectly on JMeter 2.9 (and earlier). > >>> > >>> FYI, the test looks like this: > >>> > >>> Test Plan > >>> Setup stuff (User Defined Vars, Requests Defaults, > > Cookie > >>> Manager, etc.) > >>> > >>> "Includes" Test Fragment > >>> Include Controller - Login.jmx > >>> Include Controller - Timer.jmx > >>> > >>> "Timer Start" Thread Group > >>> User Parameters - "Timer Start" > >>> Module Controller - "Timer" (from > > "Includes/Timer" > >>> module above) > >>> > >>> "Login" Thread Group > >>> User Parameters - "Login" > >>> Module Controller - "Login" (from > > "Includes/Login" > >>> module above) > >>> > >>> "Timer End" Thread Group > >>> User Parameters - "Timer End" > >>> Module Controller - "Timer" (from > > "Includes/Timer" > >>> module above) > >>> Tree Listener (only shows 'errors') > >>> Summary Report Listener > >>> > >>> Near as I can tell, each thread group runs - for as many threads > >>> as I expect - but nothing happens within the thread group (e.g., > >>> none of the 'Module Controllers' actually do anything). > >>> > >>> BTW, if I "merge" the two "Included" test fragments - into the > > "Includes" > >>> Test Fragment - and re-configure my module controllers to point to > >>> the merged stuff, it works. So it appears to be a problem with the > >>> Include Controller not actually loading my stuff. > >>> > >>> I have noted a significant performance boost on this new version > >>> of JMeter, but I can't use it if I can't get the Include > >>> Controller to work... So any help would be very appreciated. > >>> > >>> -- > >>> Robin D. Wilson > >>> Sr. Director of Web Development > >>> KingsIsle Entertainment, Inc. > >>> VOICE: 512-777-1861 > >>> http://www.kingsisle.com > >>> > >>> > >>> ------------------------------------------------------------------ > >>> --- To unsubscribe, e-mail: user-unsubscr...@jmeter.apache.org > > <javascript:;> > >>> For additional commands, e-mail: user-h...@jmeter.apache.org > >> <javascript:;> > >>> > >>> > >> > >> -- > >> > >> Regards > >> Ubik Load Pack <http://ubikloadpack.com> Team Follow us on Twitter > >> <http://twitter.com/ubikloadpack> > >> > >> > >> Cordialement > >> L'équipe Ubik Load Pack <http://ubikloadpack.com> Suivez-nous sur > >> Twitter <http://twitter.com/ubikloadpack> > >> > >> ------------------------------------------------------------------- > >> -- To unsubscribe, e-mail: user-unsubscr...@jmeter.apache.org > >> For additional commands, e-mail: user-h...@jmeter.apache.org > >> > >> > > > > > > -- > > > > Regards > > Ubik Load Pack <http://ubikloadpack.com> Team Follow us on Twitter > > <http://twitter.com/ubikloadpack> > > > > > > Cordialement > > L'équipe Ubik Load Pack <http://ubikloadpack.com> Suivez-nous sur > > Twitter <http://twitter.com/ubikloadpack> > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: user-unsubscr...@jmeter.apache.org > For additional commands, e-mail: user-h...@jmeter.apache.org > > --------------------------------------------------------------------- To unsubscribe, e-mail: user-unsubscr...@jmeter.apache.org For additional commands, e-mail: user-h...@jmeter.apache.org
