No, I can see that it has replaced the original logo, and I can see the background color of it - which was originally white, but then I changed it to gray, which was too dark grey, and then I changed it to a lighter grey, which now blends with the background grey perfectly, so that the only way to see the outline of the logo is to click on the area.
So I have been able to notice the changes in colour on the rectangle, but in all of the above cases the black letters of the logo are not appearing. Thanks, Goran On Thu, Feb 18, 2010 at 11:12 PM, Ruth Hoffman <[email protected]>wrote: > Hi Goran: > Is it not showing up at all? Ever? > Ruth > > > Goran Janevski wrote: > >> Ruth, >> >> The logo started at something like 700 by 200 px, but I actually tried >> shrinking it yesterday, and got down to 128 by 45. Just now I shrunk the >> image to 90 by 34 pix, but still didn't show. Rotated it by 90 degrees so >> it became 34 by 90 pix, still no luck. >> >> I'll continue plugging tomorrow, and you and Scott have given me enough to >> go on for a while, and I thank you both. >> >> Thanks again for the great info, >> Goran >> >> On Thu, Feb 18, 2010 at 8:25 PM, Ruth Hoffman <[email protected]> >> wrote: >> >> >> >>> Hi Goran: >>> Just in case you are not a CSS or Freemarker heavyweight or you start >>> getting bogged down in where are the files are: >>> >>> The store header is defined by a CSS DIV container set to 80px high. >>> Within >>> that DIV container are three other DIV containers: #left, #middle, >>> #right. >>> DIV#left is set to 280px wide. So if your image is larger that 80px X >>> 280px, >>> you will more than likely have some overlap. Since there isn't any local >>> "img" styling, if your image is smaller, it may not sit inside the #left >>> container in a way that pleases you. >>> >>> The CSS is in ~ecommain.css the Freemarker file that defines the HTML is >>> in >>> >>> ~specialpurpose/ecommerce/webapp/ecommerce/includes/header.ftl >>> >>> How large is your logo? >>> >>> Regards, >>> Ruth >>> >>> >>> Goran Janevski wrote: >>> >>> >>> >>>> Yey! It worked. >>>> >>>> Now if I can just figure out why my gif picture is not showing up >>>> properly >>>> as the ofbizLogo.gif, I will have reached my first milestone. >>>> >>>> I will read the technical production setup guide, and a couple of others >>>> before I ask more questions. >>>> >>>> Thanks very much, >>>> Goran >>>> >>>> On Thu, Feb 18, 2010 at 7:06 PM, Scott Gray <[email protected] >>>> >>>> >>>>> wrote: >>>>> >>>>> >>>> >>>> >>>> >>>>> Sorry I missed the rest of the settings: >>>>> framework/base/config/ofbiz-containers.xml >>>>> Find the container named catalina-container and within that the >>>>> following >>>>> two property elements: http-connector and https-connector and change >>>>> the >>>>> port properties to 80 and 443 respectively. >>>>> >>>>> You'll find some other useful information in this document: >>>>> >>>>> >>>>> http://cwiki.apache.org/confluence/display/OFBTECH/Apache+OFBiz+Technical+Production+Setup+Guide >>>>> >>>>> Regards >>>>> Scott >>>>> >>>>> On 18/02/2010, at 4:54 PM, Goran Janevski wrote: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> Scott, >>>>>> >>>>>> That actually did not work. After I modify the port in url.properties >>>>>> >>>>>> >>>>>> >>>>>> >>>>> and >>>>> >>>>> >>>>> >>>>> >>>>>> setting it to 80, I can not access the web site with the domain only. >>>>>> I >>>>>> >>>>>> >>>>>> >>>>>> >>>>> can >>>>> >>>>> >>>>> >>>>> >>>>>> still access the web site using port 8080, but not without it. I >>>>>> >>>>>> >>>>>> >>>>>> >>>>> restarted >>>>> >>>>> >>>>> >>>>> >>>>>> the server after making the modification. >>>>>> >>>>>> I also tried another random port (8088), with the same result. >>>>>> >>>>>> Which leads me to believe that changing the port in url.properties >>>>>> does >>>>>> >>>>>> >>>>>> >>>>>> >>>>> not >>>>> >>>>> >>>>> >>>>> >>>>>> impact the port being used, *unless: *do I need to recompile/rebuild >>>>>> the >>>>>> whole thing in order for the port change to take effect? >>>>>> >>>>>> Or, is there some other place that I also need to change the port from >>>>>> >>>>>> >>>>>> >>>>>> >>>>> 8080 >>>>> >>>>> >>>>> >>>>> >>>>>> to 80. >>>>>> >>>>>> Sorry for being such a newbie. >>>>>> >>>>>> Thanks again, >>>>>> Goran >>>>>> >>>>>> On Thu, Feb 18, 2010 at 5:38 PM, Scott Gray < >>>>>> [email protected] >>>>>> wrote: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> You can also modify framework/webapp/config/url.properties to set >>>>>>> your >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> http >>>>>> >>>>>> >>>>> >>>>> >>>>>> port to 80 and the https port to 443 so that users do not need to >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>> specify >>>>>> >>>>>> >>>>> >>>>> >>>>>> the port after the host name. >>>>>> >>>>>> >>>>>>> Regards >>>>>>> Scott >>>>>>> >>>>>>> HotWax Media >>>>>>> http://www.hotwaxmedia.com >>>>>>> >>>>>>> On 18/02/2010, at 3:30 PM, Ruth Hoffman wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Hi Goran: >>>>>>>> You don't need to do that. You can go to the ofbiz-component.xml >>>>>>>> file >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> for >>>>>>> >>>>>>> >>>>>> >>>>> >>>>>> the ecommerce component (~specialpurpose/ecommerce) and change the >>>>>> >>>>>> >>>>>>> mount-point entry to be mount-point="/". >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Hope that helps. >>>>>>>> Ruth >>>>>>>> >>>>>>>> Goran Janevski wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> Actually, now that you helped me figure this out, I can probably do >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> some >>>>>>>> >>>>>>>> >>>>>>> >>>>> >>>>>> kind of DNS mapping through GoDaddy to get down to www.mydomain.com. >>>>>> >>>>>> >>>>>>> When I figure it out, I will report back. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> Best Regards, >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> Goran >>>>>>>>>> >>>>>>>>>> >>>>>>>>> On Thu, Feb 18, 2010 at 11:19 AM, Goran Janevski < >>>>>>>>> [email protected] >>>>>>>>> >>>>>>>>> >>>>>>>> wrote: >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> Just trying to get started on OfBiz. First impression: not much >>>>>>>>>> documentation to go on. >>>>>>>>>> >>>>>>>>>> I was able to get the vanilla OfBiz running, but: >>>>>>>>>> >>>>>>>>>> 1) I can't get to it via a domain name. I can get to it on the >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> intranet, >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> via the intranet IP address: http:// >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>> <local-ip>:8080/ecommerce<http://%3clocal-ip%3e:8080/ecommerce> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>> >>>>>> (also >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>>> using "localhost" instead of <local-ip>). I can get to it >>>>>>>> externally >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>> via my >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> router's WAN IP address: http://<wan-ip>:8080/ecommerce<http:// >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>> %3cwan-ip%3e:8080/ecommerce>. >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> But, I can't get to it via www.mydomain.com. >>>>>>>> >>>>>>>> >>>>>>>>> I made sure there are no firewalls blocking this. I opened up TCP >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> ports >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> 80, 8080, and the https port on my router. >>>>>>>> >>>>>>>> >>>>>>>>> Can anyone help with this, please? >>>>>>>>>> >>>>>>>>>> 2) I purchased Ms.Hoffman's catalog book, but it refers to oFBiz >>>>>>>>>> 4. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> I >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>> >>>>>> downloaded oFBiz 9 (current), and in it, there is no place to change >>>>>> >>>>>> >>>>>>> >>>>>>>>>> >>>>>>>>> the >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>>> logo on a store (whereas it was clearly available in OfBiz 4) (!). >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>> Why >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>> >>>>>> would this be removed? So I proceeded to overwrite the >>>>>> >>>>>> >>>>>>> >>>>>>>>>> >>>>>>>>> ofbizLogo.gif >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>> >>>>>> with >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>>> one of my own, and I can see that it replaced the ofbiz logo, but >>>>>>>> it >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>> is >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>> >>>>>> not >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>>> showing properly. Is there some resolution requirements on the >>>>>>>> logo >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>> or >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>> >>>>>> any >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>>> other image displayed on the web page? >>>>>>>> >>>>>>>> >>>>>>>>> Thanks, >>>>>>>>>> Goran >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>> >>>> >>> >> >> >
