Will do! :) On Fri, Mar 22, 2019 at 12:03 PM Maxim Solodovnik <solomax...@gmail.com> wrote:
> Thanks for the report Daniel! > Could you please file JIRA > > The issue might be minor, but it's "User eXperience" so worth fixing :) > > On Fri, 22 Mar 2019 at 22:45, Daniel Ascher <aplusad...@aplustutoring.com> > wrote: > >> I haven't had a chance to test it out yet. However I just went into a >> conference room and noticed an issue. >> >> If the camera and mic are already on, and one clicks on the gear icon to >> change camera and mic settings, there is terrible audio feedback (like when >> you have computers side by side with both mics on). Hope that's not a major >> issue to fix. It seems that the mic should be turned off as soon as one >> clicks the settings gear icon. >> >> I look forward to testing this out more! Thanks for all your hard work >> everyone. Dan >> >> >> >> On Fri, Mar 22, 2019 at 11:33 AM Maxim Solodovnik <solomax...@gmail.com> >> wrote: >> >>> Hello All, >>> >>> It seems all major issues for 5.0.x were fixed >>> Any objections to release 5.0.0-M1? >>> >>> M1 == Milestone 1, i.e. this version worth wider testing but might be >>> not production ready >>> >>> WDYT? >>> >>> On Wed, 6 Mar 2019 at 22:54, Maxim Solodovnik <solomax...@gmail.com> >>> wrote: >>> >>>> Hmm, >>>> It seems to be the same issue with Audio in Safari + >>>> Screen-sharing/Recording is not working >>>> I'll to deal with Audio (will ask you to test) >>>> >>>> And will try to check screen-sharing using "real" Mac >>>> most probably next week >>>> >>>> Please file JIRA regarding this :) >>>> Thanks in advance! >>>> >>>> On Wed, 6 Mar 2019 at 22:44, Alvaro <zurca...@gmail.com> wrote: >>>> > >>>> > >>>> > Ok, now it is installed kurento on Ubuntu 18.04. >>>> > >>>> > >>>> > # Server: OM 5.0.0 - Ubuntu 18.04 >>>> > >>>> > # Client: Safari - Firefox in Mojave >>>> > >>>> > Please take a look the videos: >>>> > >>>> > >>>> > OM 5.0.0 Firefox recording in room.mov >>>> > >>>> > OM 5.0.0 Safari recording in room.mov >>>> > >>>> > OM 5.0.0 kurento Firefox and Safari.mov >>>> > >>>> > >>>> > ----------------------------- >>>> > >>>> > >>>> > >>>> > >>>> > El mié, 06-03-2019 a las 21:22 +0700, Maxim Solodovnik escribió: >>>> > >>>> > Please do not hesitate to report any issues >>>> > It is really hard to develop OM5 without user feedback :) >>>> > >>>> > On Wed, 6 Mar 2019 at 19:53, Maxim Solodovnik <solomax...@gmail.com> >>>> wrote: >>>> > >>>> > >>>> > OK, >>>> > >>>> > OM 5.0.0 is on https://om.alteametasoft.com:8443/next >>>> > I would like to get feedback >>>> > >>>> > complex multiuser scenarious are welcome :) >>>> > >>>> > On Wed, 6 Mar 2019 at 18:55, Maxim Solodovnik <solomax...@gmail.com> >>>> wrote: >>>> > >>>> > >>>> > Hello James, >>>> > >>>> > what version are you running? and what are the issues? >>>> > >>>> > Is it nightly build from our build server? or are you building from >>>> sources? >>>> > >>>> > On Wed, 6 Mar 2019 at 18:53, james judge < >>>> jjudge.develope...@gmail.com> wrote: >>>> > >>>> > >>>> > I know I am new to the group,. but I welcome 5.0.0 and will be happy >>>> to test. I've got an aws ubuntu 16 instance running and will happily >>>> provide feedback. I have had some issues with the current version doing >>>> desktop sharing and can't wait to see it possibly working. >>>> > >>>> > Thank you, >>>> > James Judge >>>> > www.JamesJudge.info >>>> > (570) 230-4933 >>>> > >>>> > >>>> > On Tue, Mar 5, 2019 at 9:13 PM Maxim Solodovnik <solomax...@gmail.com> >>>> wrote: >>>> > >>>> > >>>> > Hello All, >>>> > >>>> > 4.0.8 VOTE is on the way >>>> > So it's time for this DISCUSSION :) >>>> > >>>> > I was able to implement some missing features >>>> (recording+screen-sharing) >>>> > >>>> > And I believe now it's time to deploy current 5.0.0 version to >>>> > demo-next and perform couple of rounds of "community testing" >>>> > WDYT? >>>> > >>>> > On Sat, 20 Oct 2018 at 17:36, Maxim Solodovnik <solomax...@gmail.com> >>>> wrote: >>>> > >>>> > >>>> > Good to know it is not OM issue :) >>>> > You can use postgres as DB, should work out of the box :) >>>> > On Sat, 20 Oct 2018 at 16:12, Alvaro <zurca...@gmail.com> wrote: >>>> > >>>> > >>>> > Ok Maxim. 've follow your link and run: >>>> > >>>> > mysql_tzinfo_to_sql /usr/share/zoneinfo | mysql -u root -p mysql >>>> > >>>> > That have changed something in my Debian 9 that affect also to my >>>> > Windows 10 (two hours less) but could'nt install OM 5 on Debian 9. >>>> > >>>> > So, in Debian 9 was 10 hours AM, and in Windows was 8 hours AM. >>>> > >>>> > Today, in Debian 9, 've changed tzdata from Europe/Madrid to >>>> Atlantic/Azores >>>> > (two hours less). After this tryied install OM 5 and...WINNER! >>>> > >>>> > The problem it was relationed with tzdata, as you said. >>>> > >>>> > Thank you. >>>> > >>>> > Alvaro >>>> > >>>> > ............................................................. >>>> > >>>> > El vie, 19-10-2018 a las 17:01 +0700, Maxim Solodovnik escribió: >>>> > >>>> > Check this article: >>>> https://stackoverflow.com/questions/49518683/the-server-time-zone-value-cest-is-unrecognized >>>> > >>>> > >>>> > On Fri, 19 Oct 2018 at 17:00, Maxim Solodovnik <solomax...@gmail.com> >>>> wrote: >>>> > >>>> > It is weird you have both: Europe/Madrid (CEST, +0200) >>>> > I'll try to Google this error, should be something well-known >>>> > >>>> > On Fri, 19 Oct 2018 at 16:55, Alvaro <zurca...@gmail.com> wrote: >>>> > >>>> > ...i will try in Fedora 28. >>>> > >>>> > Here is it you ask: >>>> > >>>> > root@cor:/home/guadal# timedatectl >>>> > Local time: vie 2018-10-19 11:37:19 CEST >>>> > Universal time: vie 2018-10-19 09:37:19 UTC >>>> > RTC time: vie 2018-10-19 11:37:19 >>>> > Time zone: Europe/Madrid (CEST, +0200) >>>> > Network time on: yes >>>> > NTP synchronized: no >>>> > RTC in local TZ: yes >>>> > >>>> > Warning: The system is configured to read the RTC time in the local >>>> time zone. >>>> > This mode can not be fully supported. It will create various >>>> problems >>>> > with time zone changes and daylight saving time adjustments. >>>> The RTC >>>> > time is never updated, it relies on external facilities to >>>> maintain it. >>>> > If at all possible, use RTC in UTC by calling >>>> > 'timedatectl set-local-rtc 0'. >>>> > >>>> > >>>> > ...then i run: timedatectl set-local-rtc 0 >>>> > >>>> > ...and after again: >>>> > >>>> > root@cor:/home/guadal# timedatectl >>>> > Local time: vie 2018-10-19 11:39:11 CEST >>>> > Universal time: vie 2018-10-19 09:39:11 UTC >>>> > RTC time: vie 2018-10-19 09:39:11 >>>> > Time zone: Europe/Madrid (CEST, +0200) >>>> > Network time on: yes >>>> > NTP synchronized: no >>>> > RTC in local TZ: no >>>> > >>>> > >>>> > ................................................................ >>>> > >>>> > El vie, 19-10-2018 a las 16:30 +0700, Maxim Solodovnik escribió: >>>> > >>>> > Just have checked with >>>> > mysqld Ver 5.7.23-0ubuntu0.16.04.1 for Linux on x86_64 ((Ubuntu)) >>>> > >>>> > Everything works as expected >>>> > >>>> > Maybe there are some more TZ settings in MariaDB? >>>> > >>>> > What is the output of >>>> > >>>> > `timedatectl` >>>> > >>>> > >>>> > >>>> > >>>> > On Fri, 19 Oct 2018 at 16:18, Alvaro <zurca...@gmail.com> wrote: >>>> > >>>> > ...in: /etc/timezone ...is Europe/Madrid, but i've reconfigured tzdata >>>> > with Europe/Madrid, but the resultat is the same. >>>> > >>>> > With OM 4.0.7 is no problem installation. >>>> > >>>> > >>>> > ........................................ >>>> > >>>> > >>>> > El vie, 19-10-2018 a las 15:47 +0700, Maxim Solodovnik escribió: >>>> > >>>> > The error is "The server time zone value 'CEST' is unrecognized or >>>> represents more than one time zone. You must configure either the server or >>>> JDBC driver (via the serverTimezone configuration property) to use a more >>>> specifc time zone value if you want to utilize time zone support." >>>> > >>>> > MySql for some reason don't like if time zone is set as CEST, can you >>>> run >>>> > >>>> > `dpkg-reconfigure tzdata` >>>> > and set something like 'Europe/Madrid' as time zone? >>>> > >>>> > >>>> > >>>> > On Fri, 19 Oct 2018 at 15:43, Alvaro <zurca...@gmail.com> wrote: >>>> > >>>> > Please take a look attached files. >>>> > >>>> > >>>> > .......................... >>>> > >>>> > >>>> > El vie, 19-10-2018 a las 15:34 +0700, Maxim Solodovnik escribió: >>>> > >>>> > Will try to reproduce >>>> > Anything useful in the logs? >>>> > >>>> > >>>> > On Fri, 19 Oct 2018 at 15:32, Alvaro <zurca...@gmail.com> wrote: >>>> > >>>> > OM 5 - Snapshot 2605 >>>> > >>>> > When try install it say: Could not create connection to >>>> > database.... (attached capture). >>>> > >>>> > Debian 9, mysql-connector-java-8.0.12.jar >>>> > >>>> > Alvaro >>>> > >>>> > >>>> > .................................. >>>> > >>>> > >>>> > >>>> > El vie, 19-10-2018 a las 09:04 +0700, Maxim Solodovnik escribió: >>>> > >>>> > Correction: OM5 will work with MySql driver 5.x but you need to >>>> change driver class in mysql_persistense.xml to achieve this >>>> > Driver class name has been changed in 8.x and was producing warning >>>> in the logs, this is why I have changed it >>>> > >>>> > >>>> > On Fri, 19 Oct 2018 at 09:01, Maxim Solodovnik <solomax...@gmail.com> >>>> wrote: >>>> > >>>> > Hello Alvaro, >>>> > >>>> > OM5 requires latest MySql driver 8.0.12 [1] >>>> > OM4 can use both 5.x and 8.x >>>> > >>>> > [1] https://mvnrepository.com/artifact/mysql/mysql-connector-java >>>> > >>>> > >>>> > On Thu, 18 Oct 2018 at 23:38, Alvaro <zurca...@gmail.com> wrote: >>>> > >>>> > Hello Maxim, >>>> > >>>> > I've got the attached capture trying install OM 5 (first Snapshot >>>> > of today 18-10-2018). >>>> > >>>> > With mysql-connector-java-5.1.46.jar and >>>> > mysql-connector-java-5.1.47.jar >>>> > >>>> > Alvaro >>>> > >>>> > .................................... >>>> > >>>> > >>>> > El vie, 12-10-2018 a las 09:48 +0700, Maxim Solodovnik escribió: >>>> > >>>> > Hello All, >>>> > >>>> > some news regarding WebRTC >>>> > >>>> > Settings dialog is made more user friendly: less "silent fails", less >>>> JS errors >>>> > >>>> > BUT it seems some RTC features are not working if you have MS Edge >>>> and Win 10 NOT pro or Enterprise [1] >>>> > I have 2 identical VMs >>>> > 1) with Win 10 Pro >>>> > 2) with Win 10 Pro.N >>>> > >>>> > I have issues with #2 and everything works as expected on #1 >>>> > >>>> > Additionally there is an issue with Edge browser: [2] >>>> > >>>> > Would appreciate if you can test latest version on "demo-apache" [3] >>>> > >>>> > [1] >>>> https://developer.microsoft.com/en-us/microsoft-edge/platform/issues/17357055/#comment-5 >>>> > [2] https://issues.apache.org/jira/browse/OPENMEETINGS-1956 >>>> > [3] https://demo-openmeetings.apache.org/openmeetings >>>> > >>>> > >>>> > >>>> > On Tue, 9 Oct 2018 at 21:53, Maxim Solodovnik <solomax...@gmail.com> >>>> wrote: >>>> > >>>> > Document conversion is actually broken on this demo server >>>> > This seems to be caused by server configuration >>>> > No sure yet what is wrong >>>> > Will try to fix it in a week or two, have no idea what can be wrong :( >>>> > >>>> > >>>> > On Tue, 9 Oct 2018 at 21:46, Maxim Solodovnik <solomax...@gmail.com> >>>> wrote: >>>> > >>>> > I'm going to perform additional code-review and will check this >>>> > >>>> > This is only initial version :) >>>> > Hopefully will be improved :)) >>>> > >>>> > >>>> > >>>> > On Tue, 9 Oct 2018 at 21:39, Stefan Kühl <ste...@quatrekuehl.eu> >>>> wrote: >>>> > >>>> > Checked it again with Win10 und FF, but with a USB Headset and it >>>> works well! (I just recognize that my voice was also in my headphones?!) >>>> > Retry it with the non USB Headset und it won't work. I mentioned that >>>> FF and Chrome didn't ask for permission to use the the microphone of the >>>> non-USB Headset. Maybe, this a the point we should draw our attention too? >>>> > Stefan >>>> > >>>> > >>>> > Am 09.10.2018 15:49, schrieb Daniel Ascher: >>>> > >>>> > It is now working properly in Edge. >>>> > >>>> > >>>> > >>>> > >>>> > On Tue, Oct 9, 2018 at 6:04 AM Stefan Kühl <ste...@quatrekuehl.eu> >>>> wrote: >>>> > >>>> > Nothing changes. Got another test on an virtual Win10 and fresh >>>> firefox installtion. Same behaviour. >>>> > Stefan >>>> > >>>> > >>>> > Am 09.10.2018 10:27, schrieb Maxim Solodovnik: >>>> > It is weird: you got "MS Edge" errors on Chrome+FF :(( >>>> > I have fixed some "Edge" errors, so demo should behave better >>>> > >>>> > I'll fix some more errors with settings dialog later ... >>>> > >>>> > Thanks for the reports >>>> > >>>> > >>>> > On Tue, 9 Oct 2018 at 12:32, Stefan Kühl <ste...@quatrekuehl.eu> >>>> wrote: >>>> > >>>> > The screenshot was taken in firefox 62.0.3 and ubuntu 18.04., same >>>> behaviour in chrome 69.0.329 and ubuntu 18.04. >>>> > Also tried with root and sudo to avoid restrictions. >>>> > Stefan >>>> > >>>> > >>>> > Am 09.10.2018 07:23, schrieb Maxim Solodovnik: >>>> > What OS/Browser are you using? >>>> > >>>> > On Tue, 9 Oct 2018 at 12:09, Stefan Kühl <ste...@quatrekuehl.eu> >>>> wrote: >>>> > >>>> > Hi, >>>> > tried the OM 5 Demo with plugged in headset. But no chance to choose >>>> it. The "Choose microphone" option remains in "Loading data, please wait" >>>> and everytime i try to reload, the red error message appears. Headset is >>>> not USB but chinch. >>>> > >>>> > Stefan >>>> > >>>> > Am 09.10.2018 06:27, schrieb Maxim Solodovnik: >>>> > Actually it is not one page it is OM site being re-build with every >>>> nightly build ... >>>> > Site contents should be ready to 5.0 release, so all pages need to >>>> checked/updated >>>> > >>>> > news, changelog and announces will be updated during release process, >>>> so it displays 4.0.5 right now :) >>>> > >>>> > >>>> > On Mon, 8 Oct 2018 at 23:53, Daniel Ascher < >>>> aplusad...@aplustutoring.com> wrote: >>>> > >>>> > This page: >>>> https://builds.apache.org/view/M-R/view/OpenMeetings/job/openmeetings/site/openmeetings-server/index.html >>>> > >>>> > is set up for version 4.0.5, correct? Is that what you want me to >>>> check for errors/updates? Or do you want something mentioning version 5.0? >>>> > >>>> > Thanks. Dan >>>> > >>>> > On Mon, Oct 8, 2018 at 12:51 PM Daniel Ascher < >>>> aplusad...@aplustutoring.com> wrote: >>>> > >>>> > I just checked in Edge but there is a problem. >>>> > >>>> > >>>> > >>>> > >>>> > On Mon, Oct 8, 2018 at 12:21 PM Maxim Solodovnik < >>>> solomax...@gmail.com> wrote: >>>> > >>>> > document upload seems to be jodConverter and/or server issue, hopelly >>>> will be able to address >>>> > Was 5.0.0 working under Edge? Any issues? >>>> > >>>> > Additional task might be to check site of 5.0 version: >>>> https://builds.apache.org/view/M-R/view/OpenMeetings/job/openmeetings/site/openmeetings-server/index.html >>>> > and report any outdated/missing/unclear page .... >>>> > >>>> > On Mon, 8 Oct 2018 at 23:03, Daniel Ascher < >>>> aplusad...@aplustutoring.com> wrote: >>>> > >>>> > It's really great that you got WebRTC going!! I'm sure it's been a >>>> lot of hard work. >>>> > >>>> > I tried uploading a document but it didn't work. I assume that the >>>> document conversion stuff isn't configured yet so that is why I asked what >>>> needs to be tested. >>>> > >>>> > I'll try using it in Edge and do some of the testing you mentioned. >>>> Let me know if there is anything else I can help with. >>>> > >>>> > Dan >>>> > >>>> > >>>> > >>>> > On Sun, Oct 7, 2018 at 9:09 PM Maxim Solodovnik <solomax...@gmail.com> >>>> wrote: >>>> > >>>> > Hello Daniel, >>>> > >>>> > yes, this is WebRTC :) >>>> > >>>> > Nettesing and Video setup seems to work as expected and most probably >>>> will not be changed too much >>>> > >>>> > Room Audio/Video is in "early-alpha" stage and I would like to know: >>>> how good is it so far? >>>> > Is on/off audio/video being correctly handled? Same regarding >>>> add/remove rights >>>> > >>>> > This version should not work in IE11, Does in work in Safari/Edge? >>>> > >>>> > On Mon, 8 Oct 2018 at 01:48, Daniel Ascher < >>>> aplusad...@aplustutoring.com> wrote: >>>> > >>>> > Hi Maxim. I see that the webcam and audio are working. Is this >>>> WebRTC? What would you like us to check for when we are trying it out? >>>> > >>>> > Thanks. Dan >>>> > >>>> > On Sun, Oct 7, 2018 at 11:07 AM Maxim Solodovnik < >>>> solomax...@gmail.com> wrote: >>>> > >>>> > OK, >>>> > >>>> > current (I would say alpha version) is available on our demo server: >>>> https://demo-openmeetings.apache.org/openmeetings >>>> > Something still not implemented, and there are definitely some >>>> issues, but this version is "playable" >>>> > >>>> > It would be great to get some early feedback ... >>>> > >>>> > >>>> > On Wed, 3 Oct 2018 at 18:35, K, Amit (MIND) <ami...@mind-infotech.com> >>>> wrote: >>>> > >>>> > Best of luck... J >>>> > >>>> > From: Maxim Solodovnik [mailto:solomax...@gmail.com] >>>> > Sent: Wednesday, October 3, 2018 4:44 PM >>>> > To: Openmeetings user-list <user@openmeetings.apache.org> >>>> > Subject: Re: OM 5 >>>> > >>>> > Hello Aaron, >>>> > >>>> > I'm currently trying to set up demo with somehow working version of >>>> 5.0 >>>> > Will let you know if it will be successful :) >>>> > >>>> > On Tue, 2 Oct 2018 at 23:35, <aaron.h...@gmail.com> wrote: >>>> > How close do you think it is for going into live testing with OM5? >>>> Reason I ask is with the most recent update to Chrome, even with a valid >>>> cert, and even if you told the website to allow flash, users are having to >>>> click allow flash in the audio/video box. And then it has to refresh the >>>> page to do so. Looks like it is across the board with all flash content on >>>> any website now within Chrome. >>>> > >>>> > Didn't know how far out it was for live testing. >>>> > >>>> > >>>> > -- >>>> > WBR >>>> > Maxim aka solomax >>>> > >>>> > >>>> > >>>> > The information contained in this electronic message and any >>>> attachments to this message are intended for the exclusive use of the >>>> addressee(s) and may contain proprietary, confidential or privileged >>>> information. If you are not the intended recipient, you should not >>>> disseminate, distribute or copy this e-mail. Please notify the sender >>>> immediately and destroy all copies of this message and any attachments. >>>> WARNING: Computer viruses can be transmitted via email. The recipient >>>> should check this email and any attachments for the presence of viruses. >>>> The company accepts no liability for any damage caused by any >>>> virus/trojan/worms/malicious code transmitted by this email. >>>> www.motherson.com >>>> > >>>> > >>>> > >>>> > -- >>>> > WBR >>>> > Maxim aka solomax >>>> > >>>> > >>>> > >>>> > -- >>>> > Daniel Ascher, M.Ed. >>>> > President >>>> > A+ Test Prep and Tutoring >>>> > "Creating Bright Futures" >>>> > >>>> > 505 York Road, Suite 6 >>>> > Jenkintown, PA 19046 >>>> > Office: 215.886.9188 >>>> > Direct: 267.242.9640 >>>> > Click here to schedule a phone call with me. >>>> > Sign Up for A+ News and Test Prep Tips! >>>> > >>>> > >>>> > >>>> > >>>> > -- >>>> > WBR >>>> > Maxim aka solomax >>>> > >>>> > >>>> > >>>> > -- >>>> > Daniel Ascher, M.Ed. >>>> > President >>>> > A+ Test Prep and Tutoring >>>> > "Creating Bright Futures" >>>> > >>>> > 505 York Road, Suite 6 >>>> > Jenkintown, PA 19046 >>>> > Office: 215.886.9188 >>>> > Direct: 267.242.9640 >>>> > Click here to schedule a phone call with me. >>>> > Sign Up for A+ News and Test Prep Tips! >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > -- >>>> > WBR >>>> > Maxim aka solomax >>>> > >>>> > >>>> > >>>> > >>>> > -- >>>> > WBR >>>> > Maxim aka solomax >>>> > >>>> > >>>> > >>>> > >>>> > -- >>>> > WBR >>>> > Maxim aka solomax >>>> > >>>> > >>>> > >>>> > >>>> > -- >>>> > WBR >>>> > Maxim aka solomax >>>> > >>>> > >>>> > >>>> > >>>> >>>> >>>> -- >>>> WBR >>>> Maxim aka solomax >>>> >>> >>> >>> -- >>> WBR >>> Maxim aka solomax >>> >> >> >> -- >> Daniel Ascher, M.Ed. >> President >> A+ Test Prep and Tutoring >> "Creating Bright Futures" >> >> 505 York Road, Suite 6 >> Jenkintown, PA 19046 >> Office: 215.886.9188 >> Direct: 267.242.9640 >> Click here to schedule a phone call with me. >> <https://www.aplustutoring.com/meetings/aplusadmin/phone-call> >> Sign Up for A+ News and Test Prep Tips! >> <https://www.aplustutoring.com/educational-blog-articles-subscription> >> <http://aplustutoring.com> >> > > > -- > WBR > Maxim aka solomax > -- Daniel Ascher, M.Ed. President A+ Test Prep and Tutoring "Creating Bright Futures" 505 York Road, Suite 6 Jenkintown, PA 19046 Office: 215.886.9188 Direct: 267.242.9640 Click here to schedule a phone call with me. <https://www.aplustutoring.com/meetings/aplusadmin/phone-call> Sign Up for A+ News and Test Prep Tips! <https://www.aplustutoring.com/educational-blog-articles-subscription> <http://aplustutoring.com>
