Hello Denis, On Fri, 2 Oct 2020 at 05:58, Denis Noctor <denisnoc...@gmail.com> wrote:
> Hi there Maxim, > > Are there a lot of differences between OM 5 M4 and OM 5.0.1 and current > snapshots (regarding general architecture)? > Yes you have to do import/export You can create the new DB (or backup previous DB) to be able to switch back any time > > As I mentioned in previous emails (regarding the mute issue). I did such > an upgrade but am starting to see a few glitches that I cannot emulate on > the demo servers. Users can see and hear some users but not all and vice > versa... and seems a little random. I doubt this can be caused by DB changes this behavior was observed on early versions and was caused by the fact users were not notified on their connection issues i.e. user A saw his/her picture and was sure everything is Ok with his/her AV streaming while it was broken Now connection state is monitored to ensure everything is OK > I am aware of the whole turnserver side of things and I had this > working great on OM 5 M4... and I purged and reinstalled Imagemagick to > address the file conversion problem... but I am wondering if simply > upgrading from M4 to OM 5.0.1 is not the way forward. For example, I > reimported my a database recently from OM 5 M4 and that’s when things > started to go a little odd. I assume that the DB structure is different in > 5.0.1 +? > > As strange as it sounds... it appears that users that were imported from > the old DB don’t “ appear “ to have “major” (the occasional refresh is > required) connectivity issues regarding cams and mics... but most of the > new users that were added do. 😳 I think I will reinstall afresh... and > repopulate the DB manually and see if that makes a difference. > this part I didn't get :( > > Before I do I was wondering if anyone was in the same boat etc. > > All the best, > > Denis > > Sent from my iPhone -- Best regards, Maxim
