I would expect 5.0.1 should br more stable than M4 My world was just destroyed
Do you have any "front-end reconnecting" messages? What kms version are you using? Are any of your users uses Mac and/or Safari Any changes in ports/network settings etc. ? from mobile (sorry for typos ;) On Fri, Oct 2, 2020, 17:57 Denis Noctor <denisnoc...@gmail.com> wrote: > Hi there Maxim... sorry to have to annoy you about this again. I decided > to do a reinstall of the OM 5.0.1 , new database and so on. When I log in > with 2 users, 2 machines etc... sometimes both users can see and hear each > other... but most times not...sometimes not... unless they disconnect their > cams and audio and reconnect. This sometimes takes a few attempts. Once a > stable connection is established... everything is fine. > > I used to have things working great on OM 5 M4... and I don’t seem to have > done any major changes. > > I have thought about doing a purge and reinstall of Kurento... any > suggestions how to do so. > > Using Ubuntu 18.04. > > Thanks in advance. > > Sent from my iPhone > > On Oct 1, 2020, at 8:12 PM, Maxim Solodovnik <solomax...@gmail.com> wrote: > > Hello Denis, > > On Fri, 2 Oct 2020 at 05:58, Denis Noctor <denisnoc...@gmail.com> wrote: > >> Hi there Maxim, >> >> Are there a lot of differences between OM 5 M4 and OM 5.0.1 and current >> snapshots (regarding general architecture)? >> > > Yes you have to do import/export > You can create the new DB (or backup previous DB) to be able to switch > back any time > > >> >> As I mentioned in previous emails (regarding the mute issue). I did such >> an upgrade but am starting to see a few glitches that I cannot emulate on >> the demo servers. Users can see and hear some users but not all and vice >> versa... and seems a little random. > > > I doubt this can be caused by DB changes > this behavior was observed on early versions and was caused by the fact > users were not notified on their connection issues > > i.e. user A saw his/her picture and was sure everything is Ok with his/her > AV streaming while it was broken > Now connection state is monitored to ensure everything is OK > > >> I am aware of the whole turnserver side of things and I had this >> working great on OM 5 M4... and I purged and reinstalled Imagemagick to >> address the file conversion problem... but I am wondering if simply >> upgrading from M4 to OM 5.0.1 is not the way forward. For example, I >> reimported my a database recently from OM 5 M4 and that’s when things >> started to go a little odd. I assume that the DB structure is different in >> 5.0.1 +? >> >> As strange as it sounds... it appears that users that were imported from >> the old DB don’t “ appear “ to have “major” (the occasional refresh is >> required) connectivity issues regarding cams and mics... but most of the >> new users that were added do. 😳 I think I will reinstall afresh... and >> repopulate the DB manually and see if that makes a difference. >> > > this part I didn't get :( > > >> >> Before I do I was wondering if anyone was in the same boat etc. >> >> All the best, >> >> Denis >> >> Sent from my iPhone > > > > -- > Best regards, > Maxim > >