Joost, Could you try one "off the wall" idea for me?
I note from the trace below that the directory path to the location you are using has spaces in the name ("Program Files"). Could you try doing this in a directory that does *not* have spaces and see if you get the same behavior? I have seen lots of very wierd problems where this has been the root cause. (Of course, if it works after trying this, there's clearly a bug in path handling -- the next step will be to figure out where that is.) Craig On 4/22/07, JS Portal Support <[EMAIL PROTECTED]> wrote:
Hi, Thnaks, that helped me and I think I'm almost there. I'm starting to understand maven e bit. I managed to get to the last step successfully, but there I get the error show below [1]. It seems to me I probably don't have myfacses-tomahawk properly installed in my repository. Any clues? To get to this point I had to have maven install a few things like tomahawk and myfaces. But since I've just been working on one machine to build and deploy through ant, both subversion and maven are new to me. I don't quite get how I can simply install all of myfaces including the subprojects to my local repository. Is there a step-by-step guide which lines this out; not assuming any prior knowledge of svn and mvn? I've been spending a few days on just trying to use a s:subForm with clay. Learning a lot thought ;-) Thanks, Joost [1]the error: C:\Program Files\Java\tld2claycfg\test>mvn clean install [INFO] Scanning for projects... [INFO] ------------------------------------------------------------------------- --- [INFO] Building Tld2ClayCfg Maven testapplication [INFO] task-segment: [clean, install] [INFO] ------------------------------------------------------------------------- --- [INFO] [clean:clean] [INFO] Deleting directory C:\Program Files\Java\tld2claycfg\test\target [INFO] Deleting directory C:\Program Files\Java\tld2claycfg\test\target\classes [INFO] Deleting directory C:\Program Files\Java\tld2claycfg\test\target\test-cla sses [INFO] [Tld2ClayCfgMojo:convert {execution: convert tld}] [INFO] Generate resources in C:\Program Files\Java\tld2claycfg\test\target [INFO] Got: 1 tlds [INFO] Converting: META-INF/myfaces_sandbox.tld [INFO] ------------------------------------------------------------------------ [ERROR] FATAL ERROR [INFO] ------------------------------------------------------------------------ [INFO] org/apache/myfaces/shared_tomahawk/taglib/UIComponentTagBase [INFO] ------------------------------------------------------------------------ [INFO] Trace java.lang.NoClassDefFoundError: org/apache/myfaces/shared_tomahawk/taglib/UIComp onentTagBase at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:620) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12 4) at java.net.URLClassLoader.defineClass(URLClassLoader.java:260) at java.net.URLClassLoader.access$100(URLClassLoader.java:56) at java.net.URLClassLoader$1.run(URLClassLoader.java:195) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at org.apache.shale.clay.util.TldToClayconfig.isUIComponentTag(TldToClay config.java:560) at org.apache.shale.clay.util.TldToClayconfig.writeConfigFile(TldToClayc onfig.java:447) at org.apache.shale.clay.util.TldToClayconfig.convert(TldToClayconfig.ja va:275) at org.apache.shale.Tld2ClayCfgMojo.execute(Tld2ClayCfgMojo.java:81) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi nManager.java:443) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa ultLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalWithLi fecycle(DefaultLifecycleExecutor.java:480) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(Defau ltLifecycleExecutor.java:459) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHan dleFailures(DefaultLifecycleExecutor.java:311) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegmen ts(DefaultLifecycleExecutor.java:278) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLi fecycleExecutor.java:143) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:334) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:125) at org.apache.maven.cli.MavenCli.main(MavenCli.java:272) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) [INFO] ------------------------------------------------------------------------ [INFO] Total time: 5 seconds [INFO] Finished at: Mon Apr 23 15:00:41 NZST 2007 [INFO] Final Memory: 5M/10M [INFO] ------------------------------------------------------------------------ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 18, 2007 10:39 PM To: user@shale.apache.org Subject: RE: SV: SV: using tld2claycfg Hi Stupid me :( I forgot that you also have to build the tool it self also (The mojo uses it). Downloa the tool [1] and build it using mvn clean install first. (Somehow Iassumed that everybody does like me and generate everything my self) [1] https://svn.apache.org/repos/asf/shale/tools/trunk/tld2claycfg Hermod (Hoping this will apear on the list before christmas) -----Original Message----- From: Torsten Krah [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 18, 2007 11:58 AM To: [EMAIL PROTECTED] Cc: user@shale.apache.org Subject: Re: SV: SV: using tld2claycfg mojo folder. Torsten Am Dienstag, den 17.04.2007, 22:52 +0200 schrieb Hermod Opstvedt: > Hi > > Where did you run this (folder?) > > Hermod > > > -----Opprinnelig melding----- > Fra: Torsten Krah [mailto:[EMAIL PROTECTED] > Sendt: 17. april 2007 15:23 > Til: [EMAIL PROTECTED] > Kopi: user@shale.apache.org > Emne: Re: SV: using tld2claycfg > > It seems that building anything with maven is a real pain to me. > > Java 1.5, Maven 2.0.5. > > mvn clean install > > [ERROR] BUILD ERROR > [INFO] > ------------------------------------------------------------------------ > [INFO] Failed to resolve artifact. > > Missing: > ---------- > 1) org.apache.shale:Tld2ClayCfg:jar:1.0-SNAPSHOT > > Try downloading the file manually from the project website. > > Then, install it using the command: > mvn install:install-file -DgroupId=org.apache.shale > -DartifactId=Tld2ClayCfg \ > -Dversion=1.0-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file > > Path to dependency: > 1) org.apache.shale:Tld2ClayCfgMojo:maven-plugin:1.0-SNAPSHOT > 2) org.apache.shale:Tld2ClayCfg:jar:1.0-SNAPSHOT > > ---------- > 1 required artifact is missing. > > for artifact: > org.apache.shale:Tld2ClayCfgMojo:maven-plugin:1.0-SNAPSHOT > > from the specified remote repositories: > central (http://repo1.maven.org/maven2) > > > [INFO] > ------------------------------------------------------------------------ > [INFO] For more information, run Maven with the -e switch > [INFO] > ------------------------------------------------------------------------ > [INFO] Total time: 7 seconds > [INFO] Finished at: Tue Apr 17 15:21:30 CEST 2007 > [INFO] Final Memory: 6M/11M > [INFO] > ------------------------------------------------------------------------ > > > Hints? > > Torsten > > Am Dienstag, den 17.04.2007, 15:09 +0200 schrieb Hermod Opstvedt: > > Hi > > > > I answered this yesterday, but it seems that mail sent from work uses 4-5 > > days to reach the list. > > > > > > Download the source from[1] > > > > Build the Maven plugin in the folder mojo by using mvn clean install > > In the test folder open the Mavne POM and tweak it according to what you > > want (the tld section and the dependency section). > > Run mvn clean install in the test folder. The generated jar in the target > > folder contains the Clay config files you want. > > > > [1] https://svn.apache.org/repos/asf/shale/maven/trunk/tld2claycfg > > > > Hermod > > > > > > -----Opprinnelig melding----- > > Fra: Torsten Krah [mailto:[EMAIL PROTECTED] > > Sendt: 17. april 2007 13:43 > > Til: user@shale.apache.org > > Emne: Re: using tld2claycfg > > > > I guess Hermod does, because he made it. > > > > My problem is, i cant build the tool with maven, maybe i am doing > > something wrong - so Hermod, can you give us a short intro what to do to > > build it after svn checkout and how to create the clay config files? > > > > Torsten > > > > Am Sonntag, den 15.04.2007, 12:40 +1200 schrieb JS Portal Support: > > > Hi, > > > > > > I've been trying to find some documentation on how to use the > tld2claycfg. > > I > > > want to use some myfaces sandbox components but can't find the clay > config > > > file for it and understand you can create it with tld2claycfg. Does > anyone > > > know how and where? > > > > > > Thanks, > > > Joost Schouten > > > > > > > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This email with attachments is solely for the use of the individual or entity to whom it is addressed. Please also be aware that the DnB NOR Group cannot accept any payment orders or other legally binding correspondence with customers as a part of an email. This email message has been virus checked by the anti virus programs used in the DnB NOR Group. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *