Thank you very much, my gateway was set to local network, Thanks,
On Fri, Oct 11, 2013 at 12:17 PM, Amogh Vasekar <amogh.vase...@citrix.com>wrote: > Possibly - Your default gateway on the host is set to your internal 192.* > gateway? What does route -n say? > > Thanks, > Amogh > > On 10/11/13 9:18 AM, "motty cruz" <motty.c...@gmail.com> wrote: > > >Thank you for your reply, I blow out my installation, started from > >scratch; > >you mentioned that we don't configure bridge for guest VLAN traffic but > >Cloudstack did not configure it automatically. Also, I noticied after > >installed cloudstack-agent and configure advance zone four new interfaces > >appear vnet0 - vnet3. I don't know what that is. > >root@kvm4 network-scripts]# brctl show > >bridge name bridge id STP enabled interfaces > >cloud0 8000.fe00a9fe025f no vnet0 > >cloudbr0 8000.0015177b6765 no eth0 > > vnet2 > >cloudbr1 8000.0015177b6764 no eth1 > > vnet1 > > vnet3 > >virbr0 8000.525400643b18 yes virbr0-nic > > > >after re-installing Cloudstack-management on the management server and > >Cloudstack-agent on the KVM host configure two bridge cloudbr0 for > >public/guest and Cloudbr1 for managemen/storage, now my system VMs are > >running but when trying to download and iso, I get the follwoing error "No > >route to host", > >here is my cloudbr0 bridge for public/guest traffic > >[root@kvm4 network-scripts]# less ifcfg-cloudbr0 > >DEVICE=cloudbr0 > >ONBOOT=yes > >TYPE=Bridge > >IPADDR=xxx.xxxx.xxx > >GATEWAY=xxxx.xxxx.xxxx.xxx > >NETMASK=255.255.255.0 > >DNS1=8.8.8.8 > > > >base on eth0 > >DEVICE=eth0 > >HWADDR=00:15:17:7B:67:65 > >ONBOOT=yes > >BRIDGE=cloudbr0 > > > >Thanks again, > > > > > > > > > >On Fri, Oct 11, 2013 at 2:20 AM, Sanjeev Neelarapu < > >sanjeev.neelar...@citrix.com> wrote: > > > >> Hi, > >> > >> Please post management server log and agent log from kvm (with debug > >> enabled) to find out the issue . > >> We don't have to created bridge with guest vlan for guest traffic. > >> Cloudstack will configure it automatically on kvm when required. > >> > >> -Sanjeev > >> > >> -----Original Message----- > >> From: motty cruz [mailto:motty.c...@gmail.com] > >> Sent: Thursday, October 10, 2013 10:50 PM > >> To: users@cloudstack.apache.org > >> Subject: CS 4.2 Advance Zone System VM won't start > >> > >> Hi, > >> I posted this problem in the past and got no help, so I'm trying my luck > >> again I install CS 4.2, configure advance zone for KVM cluster here is > >>my > >> brctl > >> [root@kvm4 network-scripts]# brctl show > >> bridge name bridge id STP enabled interfaces > >> cloud0 8000.fe00a9fe0212 no vnet0 > >> cloudbr0 8000.0015177b6765 no eth0 > >> vnet1 > >> vnet3 > >> cloudbr1 8000.0015177b6764 no eth1 > >> vnet2 > >> cloudbr99 8000.0015177b6764 no eth1.99 > >> virbr0 8000.52540089a4da yes virbr0-nic > >> > >> I'm using inteface eth0 for management > >> [root@kvm4 network-scripts]# less ifcfg-eth0 > >> DEVICE=eth0 > >> ONBOOT=yes > >> BRIDGE=cloudbr0 > >> > >> here is bridge for eth0 > >> DEVICE=cloudbr0 > >> ONBOOT=yes > >> TYPE=Bridge > >> IPADDR=192.168.0.10 > >> NETMASK=255.255.255.0 > >> GATEWAY=192.168.0.1 > >> DNS1=8.8.8.8 > >> > >> I'm using eth1 for public/guest > >> [root@kvm4 network-scripts]# less ifcfg-eth1 > >> DEVICE=eth1 > >> ONBOOT=yes > >> BRIDGE=cloudbr1 > >> > >> here is bridge to public network untag in vlan 1 by default > >> DEVICE=cloudbr1 > >> ONBOOT=yes > >> TYPE=Bridge > >> IPADDR=98.234.34.208 > >> NETMASK=255.255.255.0 > >> > >> I created VLAN 99 for guest traffic > >> DEVICE=eth1.99 > >> ONBOOT=yes > >> VLAN=yes > >> BRIDGE=cloudbr99 > >> > >> DEVICE=cloudbr99 > >> ONBOOT=yes > >> TYPE=Bridge > >> IPADDR=10.1.1.2 > >> NETMASK=255.255.255.0 > >> DNS1=8.8.8.8 > >> > >> I'm using CLVM for primary storage, I noticed system vms were created > >> lvm> lvscan > >> inactive > >>'/dev/hitachi-1/c490e01b-4e40-40fb-aa56-fbedd89b86cd' > >> [1.95 GiB] inherit > >> inactive > >>'/dev/hitachi-1/ec032d27-26a4-467b-a1da-222402eedd60' > >> [1.95 GiB] inherit > >> ACTIVE '/dev/vg_kvm2/lv_root' [189.20 GiB] inherit > >> ACTIVE '/dev/vg_kvm2/lv_swap' [31.51 GiB] inherit > >> lvm> > >> > >> here is my age.properties file: > >> #Storage > >> #Thu Oct 10 09:47:57 PDT 2013 > >> guest.network.device=cloudbr99 > >> workers=5 > >> private.network.device=cloudbr0 > >> port=8250 > >> resource=com.cloud.hypervisor.kvm.resource.LibvirtComputingResource > >> pod=1 > >> zone=1 > >> guid=10d96879-df46-3b97-9428-85e2934e0b95 > >> public.network.device=cloudbr1 > >> cluster=1 > >> local.storage.uuid=7c563a7d-e257-48da-9133-cf5ae8973761 > >> domr.scripts.dir=scripts/network/domr/kvm > >> LibvirtComputingResource.id=1 > >> host=192.168.0.5 > >> > >> > >> but System VMs are not starting, can someone tell me if VLAN are > >>configure > >> right? > >> > >> log: > >> 2013-10-10 10:17:58,838 DEBUG [network.lb.LBHealthCheckManagerImpl] > >> (LBHealthCheck-1:null) LB HealthCheck Manager is running and getting the > >> updates from LB providers and updating service status > >> > >> 2013-10-10 10:18:19,049 DEBUG [cloud.capacity.CapacityManagerImpl] > >> (CapacityChecker:null) Found 2 VMs on host 1 > >> 2013-10-10 10:18:19,060 DEBUG [cloud.capacity.CapacityManagerImpl] > >> (CapacityChecker:null) Found 0 VM, not running on host 1 > >> 2013-10-10 10:18:19,049 DEBUG [cloud.capacity.CapacityManagerImpl] > >> (CapacityChecker:null) Found 2 VMs on host 1 > >> 2013-10-10 10:18:19,060 DEBUG [cloud.capacity.CapacityManagerImpl] > >> (CapacityChecker:null) Found 0 VM, not running on host 1 > >> > >> > >> > >> Thanks in advance! > >> > >
