HI, I do not think that the manual db update is not going to work. In infrastructure manu, go to zone > physical Network > Guest configure > Network. Find the shared network you mentioned and go to the "View IP Ranges" and add ip Range from 10.13.0.2 to 10.13.0.149.
James. On Mon, Aug 10, 2015 at 4:56 PM, Martin Emrich <martin.emr...@empolis.com> wrote: > Yes, all were taken. I changed the "description" field in the "vlan" > table, let's see if it helps. Or do I have to change something else? > > Ciao > > Martin > > -----Ursprüngliche Nachricht----- > Von: Somesh Naidu [mailto:somesh.na...@citrix.com] > Gesendet: Freitag, 7. August 2015 21:18 > An: users@cloudstack.apache.org > Betreff: RE: Insufficient address capacity (despite plenty of addresses > left) > > > Each address between 10.13.0.150 and 10.13.0.199 is listed > But are any of these available or all are taken? > > > But what about 10.13.0.2 to 10.13.0.149? > Either this range was never added or it was remove. Check the table "vlan". > > Regards, > Somesh > > > -----Original Message----- > From: Martin Emrich [mailto:martin.emr...@empolis.com] > Sent: Friday, August 07, 2015 8:50 AM > To: users@cloudstack.apache.org > Subject: AW: Insufficient address capacity (despite plenty of addresses > left) > > Thanks... I checked the table. Each address between 10.13.0.150 and > 10.13.0.199 is listed. But what about 10.13.0.2 to 10.13.0.149? I could not > find an address range limit via the GUI, but there seems to be one (which I > might even have configured myself some time ago)... > > Ciao > > Martin > > -----Ursprüngliche Nachricht----- > Von: Somesh Naidu [mailto:somesh.na...@citrix.com] > Gesendet: Donnerstag, 6. August 2015 18:25 > An: users@cloudstack.apache.org > Betreff: RE: Insufficient address capacity (despite plenty of addresses > left) > > Martin, > > Can you check the user_ip_address table and see if the IPs in that network > are marked as being used (though incorrectly). > > Regards, > Somesh > > > -----Original Message----- > From: Martin Emrich [mailto:martin.emr...@empolis.com] > Sent: Thursday, August 06, 2015 11:21 AM > To: users@cloudstack.apache.org > Subject: Insufficient address capacity (despite plenty of addresses left) > > Hi! > > One of my shared networks seems to think it is full: > > > - In the GUI, it no longer appeared as a choice for creating a > new instance > > - Attempting to create one via cloudmonkey resulted in the error > "Insufficient address capacity". > > After deleting some VMs in this network, it worked again. > > Interestingly, there are currently only 47 hosts in this network, which > should have 253 addresses in total (/24). > > I could not find a global setting which could limit the number of IP > addresses to use, and the account (ROOT admin) is unlimited. > > Any ideas? > > Thanks > > Martin >
