Pradeep,
I have installed CS 4.2 with Ceph storage successfully around
year ago. There were no problem with configuration except the fact that
you can't configure RBD storage as primary storage during Zone set-up.
It must be NFS.
After Zone is set-up and running you may add another primary
storage and there you have list of choices where RBD type is present.
After RBD is added you may assign this as default storage for particular
cluster assuming that each cluster has its own primary storage.
PS. I have also used Ceph object gateway to connect secondary
storage. It works as expected. It would be nice to know which way are
you going to integrate Ceph into CS?
Vadim.
On 2015-09-09 08:09, Shetty, Pradeep wrote:
Please share steps for adding ceph RBD as primary storage using KVM
hypervisor in cloudstack.
We are well aware of the best practices/recommendations for cloudstack.
Regards,
Pradeep
-----Original Message-----
From: Vadim Kimlaychuk [mailto:va...@kickcloud.net]
Sent: 08 September 2015 12:14
To: users@cloudstack.apache.org
Subject: RE: Unable to add Ceph KVM node in cloudstack
Pradeep,
From documentation :
Warning -- It is NOT recommended to run services on this host not
controlled by CloudStack.
Good practice -- KVM host must be virgin-clean.
Vadim.
On 2015-09-08 09:14, Shetty, Pradeep wrote:
Hello Vadim,
We have followed the same guide and using OVS version 2.3.2 .
Ceph storage cluster is running on same KVM hypervisor and it fails
when adding to cloudstack.
Regards,
Pradeep
-----Original Message-----
From: Vadim Kimlaychuk [mailto:va...@kickcloud.net]
Sent: 08 September 2015 11:34
To: users@cloudstack.apache.org
Cc: Shetty, Pradeep
Subject: Re: Unable to add Ceph KVM node in cloudstack
Hello Shetty,
It seems you agent or libvirt configuration is wrong. Please, specify
also do you use OVS or Linux bridge?
Did you follow this guide?
http://cloudstack-installation.readthedocs.org/en/latest/hypervisor/kv
[1]
m.html
[1 [2]]
Regards,
Vadim
On 2015-09-08 08:18, Shetty, Pradeep wrote:
Hello Folks,
We are working on ceph(hammer, 0.94.3) implementation on kvm
hypervisor(centos 6.5) which will be integrated on cloudstack(4.4.2),
--- Single KVM node( OS- CentOS 6.5, libvirt-0.10.2-54.el6.x86_64,
openvswitch 2.3.2) + ceph hammer, cluster health is Ok.
We are unable to add the KVM host(new cluster) in cloudstack in an
existing zone, below is the error log.
----> agent log-- libvirt: XML-RPC error : Cannot write data: Broken
pipe
03/09/2015 13:13:15 4882 jsvc.exec error: Service exit with a return
value of 143
Please let us know the exact steps to add Ceph KVM host to cloudstack.
Thanks,
Pradeep
Links:
------
[1]
http://cloudstack-installation.readthedocs.org/en/latest/hypervisor/kvm.html
[2]
Links:
------
[1]
http://cloudstack-installation.readthedocs.org/en/latest/hypervisor/kv
[2]
http://cloudstack-installation.readthedocs.org/en/latest/hypervisor/kvm.html