Ok so done all host have been added to the new pool with bonded mgmt. And all
updates have been applied.
Next step is to attach iscsi storage to the new pool.
After storage Luns show up I'll setup HA on the pool.
Then add the new hosts to cs.
My next question is. I plan on decommissioning my current pool and setting up a
test environment with the hosts as right now I don't have a full test server
farm host pool whmcs setup.
I think I can just add xen3 with correct root Pw. Will it poll the pool and add
all the hosts or will it only add one.
I've already setup all my network tags to match and validated I can ping
primary and secondary storage and my cs management servers.
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Yiping Zhang <yzh...@marketo.com>
Date: 9/8/16 1:47 PM (GMT-06:00)
To: users@cloudstack.apache.org
Subject: Re: Adding Hosts to XenCenter Pool
On the switch side, you need to configure the port channel to LACP passive
mode. On the Xen Server side, you need to take out all bond configurations,
and assign mgmt. IP directly to NIC4. Once xen4 joins the pool, its mgmt. IP
will now be assigned to Bond4+5, and you can manually assign IPs to other newly
created bonds on Xen4.
Yiping
On 9/8/16, 11:08 AM, "Jeremy Peterson" <jpeter...@acentek.net> wrote:
Xen4 is before joining the pool.
My question is how will I have mgmt? I have a port channel setup for the
bonded interfaces if I break the bond my port channel won't come up.
Jeremy
-----Original Message-----
From: Yiping Zhang [mailto:yzh...@marketo.com]
Sent: Thursday, September 8, 2016 12:56 PM
To: users@cloudstack.apache.org
Subject: Re: Adding Hosts to XenCenter Pool
Is the xen4 config shown that of before or after xen4 has joint the pool?
If it is after, then I don’t see any problem, but if it is before, then you
need to wipe out its bond settings first.
As I said, the incoming server, i.e. the server joining the pool and in
this case the Xen4, should NOT have any bond / NIC settings, except the mgmt IP
address on NIC4.
Yiping
On 9/8/16, 10:23 AM, "Jeremy Peterson" <jpeter...@acentek.net> wrote:
Ok so I created a new pool. Added Xen3
Then tried to add Xen4 once that works I'll add Xen5 Xen6 then add to
cloudstack.
http://screencast.com/t/LNPu9XchUU
You can see Xen3's config and Xen4
Xen3 is pool master. I need to add Xen4 and more still same error.
Jeremy
-----Original Message-----
From: Yiping Zhang [mailto:yzh...@marketo.com]
Sent: Thursday, September 8, 2016 11:48 AM
To: users@cloudstack.apache.org
Subject: Re: Adding Hosts to XenCenter Pool
The problem is that for Xen1 and Xen2, the mgmt. interface is NIC4,
while for Xen3, the mgmt. interface is Bond4+5. According to docs, incoming
server should not have any bond configurations, it will automatically get those
from the pool once it becomes a pool member.
What you need to do is 1) wipe out all bond assignments on Xen3; 2)
assign mgmt. IP to NIC4, 3) join Xen3 into the pool. You can assign any
storage IPs for Xen3 after it has joint the pool.
Yiping
PS: if this is a brand new pool, I would recommend that you rebuild
the pool so that the mgmt. NIC is also a bond.
On 9/8/16, 8:43 AM, "Jeremy Peterson" <jpeter...@acentek.net> wrote:
Ok so do I have to change my existing pool hosts to have a bond? Is
that the issue ?
Jeremy
-----Original Message-----
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Thursday, September 8, 2016 10:41 AM
To: users@cloudstack.apache.org
Subject: RE: Adding Hosts to XenCenter Pool
I changed my "name" of the Box 4+5 to MGMT to match what my pool
has and same thing error.
Jeremy
-----Original Message-----
From: Jeremy Peterson [mailto:jpeter...@acentek.net]
Sent: Thursday, September 8, 2016 10:03 AM
To: users@cloudstack.apache.org
Subject: RE: Adding Hosts to XenCenter Pool
Super XenServer related but GRRRR!!!!!
http://screencast.com/t/2qpuXJaR9rhU
Xen3 is the server I want to add to the pool of xen1 and xen2
I see my Management is setup on all three IP's are reachable since
my xencenter server can see everything for both groups of servers.
Only difference is Management is called MGMT as network label on my
current pool and Bond 4+5 on the new hosts I want to add.
http://screencast.com/t/sBiNU9XAtr
That is the error I get when I try to join the pool.
The server joining the pool must have a physical management NIC
(i.e. the management NIC must not be on a VLAN or bonded PIF)
Jeremy
-----Original Message-----
From: Stephan Seitz [mailto:s.se...@secretresearchfacility.com]
Sent: Thursday, September 8, 2016 5:17 AM
To: users@cloudstack.apache.org
Subject: Re: Adding Hosts to XenCenter Pool
Am Mittwoch, den 07.09.2016, 22:57 +0000 schrieb Jeremy Peterson:
> So I am running XenCenter and I am trying to create a second pool
to
> add hosts to but when I join the pool the errors are coming up
>
> The server joining the pool must have a physical management NIC
(i.e.
> the management NIC must not be on a VLAN or bonded PIF)
Indeed, this is XenServer-specific.
Start with one host meant to be the initial pool-master. Say:
configure these trunks and networks on just this single host. Don't forget to
label these networks to meet the respective ACS labels.
If you'ld like add this host to ACS. Can be done now or later.
Additional hosts meant as additional pool-members shouldn't be
configured. Just do a simple installation and define the hosts management IP
*on one of the meant-to-be MGMT trunk-ports*.
Join the addtitional host to the pool-master and you're done. The
pool- configuration will be populated to all new pool-members. I'ld recommend
to use the identical NICs on every host - that's way easier.
> I have 6 nics
>
> 2 on board 1GB NIC ( LACP BOND with port channel to two different
> nexus 5k) MGMT
> 2 10GB NIC ( LACP BOND with port channel to two different nexus
5k)
> Primary storage
> 2 10GB NIC ( LACP BOND with port channel to two different nexus
5k)
> Sec Storage & Guest & Public traffic
>
> Everything looks good outside of a xenserver pool the minute I
want to
> add to a pool I get the above error.
>
> I am on CS 4.5.0 XS 6.5
>
> Maybe I should ask this to XenServer but I use CloudStack and I
seen
> someone talk about XenServer MGMT LACP a couple weeks ago but I
don't
> think I seen a good answer on if it works or not.
>
> I'm confused why it doesn't work.
