Well for the beginning - destroy the SSVM and it will be recreated in few tens of seconds... When you view Infrastructure --> System VMs tab, There is Agent filed which has to say "Up" - https://pasteboard.co/HKhvFr6.png here is screenshot.
It takes, say, 1-3 minutes for Agent to connect (Vm start, and agent connect) - or a bit more on slower demo infra - but wait for Agent to be connected... if it doesn't connect in some minutes, then you might have a firewall issue (SSVM agent can't connect to mgmt server on port 8250) - in this case fix firewall and better destroy ssvm again and check again. If agent is connected all fine - then SSVM should be all fine and configured properly - so after that is has to say "NFS is Mounted" - if it instead shows IP address or similar, then maybe there is some networking setup issue. Cheers Andrija On Fri, 26 Oct 2018 at 21:35, Alexandre Bruyere <bruyere.alexan...@gmail.com> wrote: > NFS was not in fact mounted. How'd I fix that? > > (Thanks a lot for the help) > > On Fri, Oct 26, 2018 at 3:26 PM Andrija Panic <andrija.pa...@gmail.com> > wrote: > > > my typo on key name - name of the key (my installation) is > > "/root/.ssh/id_rsa.cloud" (on the agent KVM node) - I swapped dot and > > underscore in previous email, sorry - same key is also avilable on MGMT > > server: /usr/share/cloudstack-common/scripts/vm/systemvm/id_rsa.cloud > > > > Anyway, via Console Access:: > > open Console windows of Secondary Storage VM > > root / password (yes... ssh listens only on local interface, so no > security > > issue...) > > > > here again execute the script from previous email... > > > > should report all fine - especially check agent connection says > connected, > > that it says "NFS is mounted" or similar, and also make sure DNS > resolution > > works :) - all from the script. > > > > > > Cheers > > > > On Fri, 26 Oct 2018 at 21:12, Alexandre Bruyere < > > bruyere.alexan...@gmail.com> > > wrote: > > > > > Command doesn't seem to work (says it can't find the ID file). Though > if > > > there's a default password for system VMs I could use the console. > > > > > > Adding that template doesn't seem to work. > > > > > > On Fri, Oct 26, 2018 at 2:47 PM Andrija Panic <andrija.pa...@gmail.com > > > > > wrote: > > > > > > > Just tested URL above, with normal (not direct) download, and it > works > > > > fine. (ACS 4.11.2 RC3) > > > > > > > > Did you check the health of the Secondary Storage Virtual Machine - I > > > would > > > > suggest to do so, since this seems as possible issue with SSVM and it > > > might > > > > means other issues for your deployment also. > > > > > > > > > > > > 1. > > > > > > > > ssh -i /root/.ssh/id.rsa_cloud -p 3922 root@<Private Ip address > > of > > > > SSVM> > > > > 2. *SSVM health check* - Run the following script inside ssvm: > > > > /usr/local/cloud/systemvm/ssvm-check.sh > > > > It checks for 1)connectivity with DNS server 2) resolving of > > domain > > > > names 3)status of secondary storage 4)ability to write to > secondary > > > > storage > > > > 5)connectivity with management server at port 8250 and 6) status > of > > > java > > > > process. > > > > > > > > > > > > Please try to add template: > > > > > > http://dl.openvm.eu/cloudstack/ubuntu/x86_64/ubuntu-16.04-kvm.qcow2.bz2 > > > - > > > > if this works... > > > > > > > > Cheers, > > > > Andrija > > > > > > > > On Fri, 26 Oct 2018 at 19:41, Alexandre Bruyere < > > > > bruyere.alexan...@gmail.com> > > > > wrote: > > > > > > > > > Direct download that bypasses secondary storage seems to make it > > ready > > > > > instantly (with the correct filesize), so I'm going to assume the > > link > > > is > > > > > good. > > > > > > > > > > On Fri, Oct 26, 2018 at 1:28 PM Alexandre Bruyere < > > > > > bruyere.alexan...@gmail.com> wrote: > > > > > > > > > > > No progress in UI, no status. > > > > > > > > > > > > How would I make sure there are no redirections? At a glance > there > > > > > doesn't > > > > > > seem to be any. > > > > > > > > > > > > On Fri, Oct 26, 2018 at 12:33 PM Andrija Panic < > > > > andrija.pa...@gmail.com> > > > > > > wrote: > > > > > > > > > > > >> Make sure no http redirections, no ssl support (not sure if > https > > > URLs > > > > > are > > > > > >> supported now in 4.11 or not). Only plain http adn status code > 200 > > > :) > > > > > >> > > > > > >> Do you see percentage /download progress in UI ? > > > > > >> > > > > > >> On Fri, Oct 26, 2018, 18:20 Alexandre Bruyere < > > > > > >> bruyere.alexan...@gmail.com> > > > > > >> wrote: > > > > > >> > > > > > >> > Hello. > > > > > >> > > > > > > >> > I've set up a Ubuntu 16.04.5 Cloudstack setup using this > > tutorial: > > > > > >> > > > > > > >> > https://rohityadav.cloud/blog/cloudstack-kvm/ > > > > > >> > > > > > > >> > The only place I've strayed is that I've configured four > network > > > > > >> interfaces > > > > > >> > - enp3s0 set as manual config, enp3s0.10 set as manual config > > > (I've > > > > > made > > > > > >> > sure my system was VLAN-enabled), cloudbr0 as a > > > > statically-configured > > > > > >> > bridge to enp3s0 and cloudbr1 as a statically-configured > bridge > > to > > > > > >> > enp3s0.10 on VLAN 10. > > > > > >> > > > > > > >> > My problem is, I'm currently trying to import an iso (Ubuntu > > > Server) > > > > > >> from > > > > > >> > URL ( > > > > http://releases.ubuntu.com/16.04/ubuntu-16.04.5-server-amd64.iso > > > > > ) > > > > > >> in > > > > > >> > two zones (one on cloudbr0, one on cloudbr1). > > > > > >> > > > > > > >> > Adding the ISO seems to work fine, but they never become > > "ready". > > > > Any > > > > > >> tips > > > > > >> > as to why? > > > > > >> > > > > > > >> > (I will be testing direct download shortly) > > > > > >> > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > Andrija Panić > > > > > > > > > > > > > -- > > > > Andrija Panić > > > -- Andrija Panić