Kindly share what you are sending vs what you are receiving and some more detail on the environment configuration
On Wed, Jan 22, 2020, 10:13 AM Dominic Chen <[email protected]> wrote: > I've verified with testpmd that the connection works. Since I'm in a > virtual machine, I don't have a physical cable to loopback, so I added > more virtual NICs and bridged them externally. I've also submitted a > patch to the e1000 driver to add support for loopback mode. I don't have > the physical hardware, so I can only verify that it works in QEMU with > e1000 and e1000e. > > Dominic > > On 1/21/2020 12:47 AM, Muhammad Zain-ul-Abideen wrote: > > Hey there, have you used packetgen to verify. Build pktgen app and > > loopback your cable to recieve what you send on the port to verify please > > > > On Tue, Jan 21, 2020, 3:34 AM Dominic Chen <[email protected] > > <mailto:[email protected]>> wrote: > > > > I've just started working with DPDK recently, and I'm a little > > confused > > by the intended behavior when transmitting and receiving on the > > same port. > > > > Currently, I haven't been able to receive the same packet that I > > transmitted, regardless of the source/destination MACs on the > Ethernet > > packet (broadcast, self, etc), or whether the port is in promiscuous > > mode. I've verified from other hosts on the network that my > > packets are > > being sent, that I am able to receive packets (as long as I didn't > > send > > them), and that I get the same behavior when using vfio-pci with both > > e1000 and vmxnet3 (emulated in VMware). > > > > Is there some built-in source MAC filtering that I'm missing? Or do I > > have to enable loopback mode? > > > > Thanks, > > > > Dominic > > > > >
