Is not possible, or at least this was answered to me :-) Cheers Andrea ----- Original Message ----- From: "Jacob Vennervald Madsen" <[EMAIL PROTECTED]> To: "KannelUsers" <[EMAIL PROTECTED]> Sent: Tuesday, April 23, 2002 5:35 PM Subject: RE: my-number in AT2
> Why not just hardcode it? If you plan to add the phone number to > kannel.conf anyhow, just put 'smsc=<phone number>' directly in the > get-url string. We've done that until now but if it could be done dynamically by fetching the receiver number from the PDU, that would be a nicer setup, right? Jacob > -----Original Message----- > From: Frederik Ammitzbøll [mailto:[EMAIL PROTECTED]] > Sent: 23. april 2002 17:22 > To: KannelUsers > Subject: RE: my-number in AT2 > > > > I'm missing a configuration option to set the phone number of > > the specific modem so when an SMS is received through a modem > > I can use the %P or %Q parameters in sms-service to tell an > > application which modem received it in the same way as I > > would do it with an SMSC connection. > > Why not just hardcode it? If you plan to add the phone number to > kannel.conf anyhow, just put 'smsc=<phone number>' directly in the > get-url string. > > Cheers, > > Frederik Ammitzbøll > Unwire > Vestergade 12A, 3. > 1456 København K > > Mobil: +45 27 11 99 99 > Fax : +45 33 33 09 70 > > > > > By the way isn't the receiver number a part of the PDU when > > the message is received? Couldn't we use that in kannel to > > make the feature I'm asking for? > > > > Best regards, > > Jacob Vennervald > > > > > > >
