You're right. The receiver number cannot be fetched from the PDU.
Se this link http://www.dreamfabric.com/sms/

Jacob

> -----Original Message-----
> From: Frederik Ammitzbøll [mailto:[EMAIL PROTECTED]]
> Sent: 23. april 2002 17:44
> To: KannelUsers
> Subject: RE: my-number in AT2
> 
> 
> > > Why not just hardcode it? If you plan to add the phone number to 
> > > kannel.conf anyhow, just put 'smsc=<phone number>' 
> directly in the 
> > > get-url string.
> > We've done that until now but if it could be done dynamically 
> > by fetching the receiver number from the PDU, that would be a 
> > nicer setup, right?
> 
> I seem to recall us having the exact same problem and wanting to add
> such a fix to kannel, but the receiver number is NOT in the PDU as far
> as I can remember (someone better correct me if I'm wrong :) ).
> 
> cheers,
> 
> Frederik Ammitzbøll
> Unwire
> Vestergade 12A, 3.
> 1456 København K
> 
> Mobil: +45 27 11 99 99
> Fax :  +45 33 33 09 70
> Web:   www.unwire.dk
> 
> 
> > Jacob
> > 
> > > -----Original Message-----
> > > From: Frederik Ammitzbøll [mailto:[EMAIL PROTECTED]]
> > > Sent: 23. april 2002 17:22
> > > To: KannelUsers
> > > Subject: RE: my-number in AT2
> > > 
> > > 
> > > > I'm missing a configuration option to set the phone number of
> > > > the specific modem so when an SMS is received through a modem 
> > > > I can use the %P or %Q parameters in sms-service to tell an 
> > > > application which modem received it in the same way as I 
> > > > would do it with an SMSC connection.
> > > 
> > > Why not just hardcode it? If you plan to add the phone number to 
> > > kannel.conf anyhow, just put 'smsc=<phone number>' 
> directly in the 
> > > get-url string.
> > > 
> > > Cheers,
> > > 
> > > Frederik Ammitzbøll
> > > Unwire
> > > Vestergade 12A, 3.
> > > 1456 København K
> > > 
> > > Mobil: +45 27 11 99 99
> > > Fax :  +45 33 33 09 70
> > > 
> > > > 
> > > > By the way isn't the receiver number a part of the PDU when
> > > > the message is received? Couldn't we use that in kannel to 
> > > > make the feature I'm asking for?
> > > > 
> > > > Best regards,
> > > > Jacob Vennervald
> > > > 
> > > > 
> > > 
> > > 
> > > 
> > 
> > 
> 
> 
> 

Reply via email to