Well I did my tests and the DCS setting doesnt works,
I dont know if is is either the CDMA network or
the CDMA mobiles. :(
I think now I know why GSM is better in many ways.
On Tue, 14 May 2002, dominguez herrera sergio andres wrote:
>
>
>
> Hmmm, according to document Bits 7..4 should be 1101
> Bit 3 set MWI active
> Bit 2 is not used
> Bit 1 0 should be 0 0 for Voice message
>
> This yields
> DCS = 1101 1000
>
> Does this works for CDMA networks?
>
> On 14 May 2002, Bruno David [ISO-8859-1] Simões Rodrigues wrote:
>
> > On Tue, 2002-05-14 at 16:12, dominguez herrera sergio andres wrote:
> > >
> > >
> > > Hello Fellow Listers:
> > >
> > >
> > > Can anyone direct me to a source of information about how
> > > the MWI icon in the handset is turned on?
> > >
> > > I would like to take a look at the source code, AFAIK
> > > MWI icon is turned on with a short message right?
> > >
> > > How does this message looks like? Is there a special code
> > > inside the text of the message that the handset interprets
> > > in order to turn on the icon?
> > >
> > > Thanks!
> >
> > MWI is encoded on DCS Field, defined on 3gpp document 23038
> >
> > With kannel, just send mwi=1-4 to enable or 5-8 to disable
> >
>
>