I'm just curious. Why do you send a USER-RELATED question to [EMAIL PROTECTED]
Please, please, for that purpose use users@kannel.org Martin. On 6/17/07, Bhagwandas Paliwal <[EMAIL PROTECTED]> wrote:
Hi All, We are using Kannel 1.4.1 with Nokia 5300 (connected using USB cable). Nokia 5300 is set to Nokia mode (out of 3 modes given - Nokia Mode, Printing and Media Mode and Data Mode). When bearerebox is started, it gives error while executing one of the AT command i.e AT+CNMI=1,2,0,1,0 We tried executing AT commands using minicom but still we were getting same problem. Can anybody please suggest solution to this problem? Right now, we have just guessed the values for detect-string so if there is any AT command to figure out these values or real values, do let us know. Please find smskannle.conf and error log below: In smskannel.conf, here is the configuration of relevant portion (modem and smsc part). #--------------------------------------------- # SMSC CONNECTIONS # # SMSC connections are created in bearerbox and they handle SMSC specific # protocol and message relying. You need these to actually receive and send # messages to handset, but can use GSM modems as virtual SMSCs # This is a fake smsc connection, _only_ used to test the system and services. # It really cannot relay messages to actual handsets! # group = smsc # smsc = fake # smsc-id = FAKE # port = 10000 # connect-allow-ip = 127.0.0.1 group = smsc smsc = at modemtype = Nokia my-number = 919844142580 #device = /dev/ttyS0 device = /dev/ttyACM0 speed = 19200 # ------------------------------------------------------------------------------ # modem definitions # ------------------------------------------------------------------------------ group = modems id = Nokia name = Nokia #detect-string = "Nokia" #init-string=ATE0 detect-string = "5300" detect-string2 = "NOKIA" message-storage = "SM" #need-sleep = true Please find full smskannel.conf at bottom of message. Here is the error we are getting when we run bearerbox. 2007-06-17 21:40:09 [11275] [0] INFO: Debug_lvl = 0, log_file = <none>, log_lvl = 0 2007-06-17 21:40:09 [11275] [0] WARNING: DLR: using default 'internal' for storage type. 2007-06-17 21:40:09 [11275] [0] INFO: DLR using storage type: internal 2007-06-17 21:40:09 [11275] [0] DEBUG: Kannel bearerbox version `1.4.1'. Build `Jun 12 2007 00:33:20', compiler `3.4.6 20060404 (Red Hat 3.4.6-3)'. System Linux, release 2.6.9-42.EL, version #1 Sat Aug 12 09:17:58 CDT 2006, machine i686. Hostname localhost.localdomain, IP 127.0.0.1. Libxml version 2.6.16. Using OpenSSL 0.9.7a Feb 19 2003. Using native malloc. 2007-06-17 21:40:09 [11275] [0] INFO: Added logfile `/root/kannel.log' with level `0'. 2007-06-17 21:40:09 [11275] [0] INFO: HTTP: Opening server at port 13000. 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread) 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run) 2007-06-17 21:40:09 [11275] [0] DEBUG: starting smsbox connection module 2007-06-17 21:40:09 [11275] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2007-06-17 21:40:09 [11275] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 11275. 2007-06-17 21:40:09 [11275] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps to pid 11275. 2007-06-17 21:40:09 [11275] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 11275. 2007-06-17 21:40:09 [11275] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 11275. 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 4 (gw/bb_boxc.c:sms_to_smsboxes) 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 5 (gw/bb_boxc.c:smsboxc_run) 2007-06-17 21:40:09 [11275] [0] INFO: Set SMS resend frequency to 60 seconds. 2007-06-17 21:40:10 [11275] [0] INFO: SMS resend retry set to unlimited. 2007-06-17 21:40:10 [11275] [0] INFO: DLR rerouting for smsc id <(null)> disabled. 2007-06-17 21:40:10 [11275] [0] INFO: AT2[/dev/ttyACM0]: configuration shows modemtype <Nokia> 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Reading modem definitions from <../smskannel.conf> 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Found <1> modems in config 2007-06-17 21:40:10 [11275] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps to pid 11275. 2007-06-17 21:40:10 [11275] [0] INFO: AT2[/dev/ttyACM0]: read modem definition for <Nokia> 2007-06-17 21:40:10 [11275] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2007-06-17 21:40:10 [11275] [0] DEBUG: Started thread 7 (gw/bb_smscconn.c:sms_router) 2007-06-17 21:40:10 [11275] [0] INFO: ---------------------------------------- 2007-06-17 21:40:10 [11275] [0] INFO: Kannel bearerbox II version 1.4.1starting 2007-06-17 21:40:10 [11275] [0] INFO: MAIN: Start-up done, entering mainloop 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: start called 2007-06-17 21:40:10 [11275] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 11275. 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: opening device 2007-06-17 21:40:10 [11275] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) maps to pid 11275. 2007-06-17 21:40:10 [11275] [7] DEBUG: sms_router: time to sleep 30.00secs. 2007-06-17 21:40:10 [11275] [7] DEBUG: sms_router: gwlist_len = 0 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: init device 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: speed set to 19200 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATZ 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CPIN?^M 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CPIN: READY 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0) 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CNMI=1,2,0,1,0^M 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR 2007-06-17 21:40:11 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Generic error: ERROR 2007-06-17 21:40:11 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Opening failed. Terminating 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: opening device 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: init device 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: speed set to 19200 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M 2007-06-17 21:40:14 [11275] [0] WARNING: Killing signal or HTTP admin command received, shutting down... 2007-06-17 21:40:14 [11275] [0] DEBUG: Shutting down Kannel... 2007-06-17 21:40:14 [11275] [0] DEBUG: shutting down smsc 2007-06-17 21:40:14 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Shutting down SMSCConn, slow 2007-06-17 21:40:14 [11275] [0] DEBUG: shutting down udp 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Wrong or no answer to ATZ, ignoring 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CPIN?^M 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CPIN: READY 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0) 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CNMI=1,2,0,1,0^M 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Generic error: ERROR 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Opening failed. Terminating 2007-06-17 21:40:15 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device 2007-06-17 21:40:15 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device 2007-06-17 21:40:15 [11275] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) terminates. 2007-06-17 21:40:15 [11275] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) terminates. 2007-06-17 21:40:15 [11275] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) terminates. 2007-06-17 21:40:15 [11275] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) terminates. 2007-06-17 21:40:15 [11275] [0] INFO: All flow threads have died, killing core 2007-06-17 21:40:15 [11275] [0] DEBUG: Waiting for 2 (gwlib/http.c:server_thread) to terminate 2007-06-17 21:40:15 [11275] [3] DEBUG: HTTP: No clients with requests, quitting. 2007-06-17 21:40:15 [11275] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) terminates. 2007-06-17 21:40:15 [11275] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) terminates. 2007-06-17 21:40:16 [11275] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) terminates. 2007-06-17 21:40:16 [11275] [0] INFO: Total WDP messages: received 0, sent 0 2007-06-17 21:40:16 [11275] [0] INFO: Total SMS messages: received 0, sent 0 2007-06-17 21:40:16 [11275] [0] DEBUG: Immutable octet strings: 210. -- Regards Bhagwandas Paliwal ------------------------------------------------------------ Kannel: Open Source WAP and SMS gateway commercial mailing list [EMAIL PROTECTED] NONE OF THE INCLUDED COMMERCIAL OFFERINGS WIHTIN THIS TRANSMITTED INFORMATION IS RELATED TO THE KANNEL GROUP OR THE KANNEL SOFTWARE FOUNDATION. THE SENDER IS RESPONSIBLE FOR THE OFFERING STATEMENTS WITHIN. The information transmitted may be intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. The Kannel Group nor The Kannel Software Foundation are responsible in any way or form if this information is transmitted to any non inteded recipient. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient may be unintentional and the sender is fully reponsible for this. If you receive this in error, please contact the sender. Any views or opinions presented are solely those of the authors and do not necessarily represent those of The Kannel Group nor The Kannel Software Foundation. ------------------------------------------------------------